From b0f0d2e9ca18d8604225bed3c984e4cf1b4c4b3c Mon Sep 17 00:00:00 2001 From: Dimitri Sokolyuk Date: Wed, 10 Feb 2016 20:31:09 +0100 Subject: Initial import --- Makefile | 617 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 617 insertions(+) create mode 100644 Makefile (limited to 'Makefile') diff --git a/Makefile b/Makefile new file mode 100644 index 0000000..f58009b --- /dev/null +++ b/Makefile @@ -0,0 +1,617 @@ +# +# WinARM template makefile +# +# +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make program = Upload load-image to the device +# +# make filename.s = Just compile filename.c into the assembler code only +# +# make filename.o = Create object filename.o from filename.c (using CFLAGS) +# +# To rebuild project do "make clean" then "make all". +# + +# This should work with just CS G++ lite installed (Win32 cmd as shell, cs-make, cs-rm) +# Tested with: +# - CS G++ 2009-Q1 (cs-make 3.81, cs-rm, cmd.exe), no MinGW or Cygwin tools in the $PATH +# - Cygwin (make 3.81, rm, bash 3.2.39) +# - MSYS/MinGW tools in $(PATH) (WinAVR\utils\bin) + + +# Toolchain prefix (i.e arm-elf- -> arm-elf-gcc.exe) +#TCHAIN_PREFIX = arm-eabi- +#TCHAIN_PREFIX = arm-elf- +TCHAIN_PREFIX = arm-none-eabi- +#REMOVE_CMD=rm +REMOVE_CMD=cs-rm + +#FLASH_TOOL = OPENOCD +#FLASH_TOOL = LPC21ISP +#FLASH_TOOL = UVISION + +# YES enables -mthumb option to flags for source-files listed +# in SRC and CPPSRC and -mthumb-interwork option for all source +USE_THUMB_MODE = YES +#USE_THUMB_MODE = NO + +# MCU name, submodel and board +# - MCU used for compiler-option (-mcpu) +# - SUBMDL used for linker-script name (-T) and passed as define +# - BOARD just passed as define (optional) +MCU = cortex-m3 +CHIP = STM32F10x_64k_20k +BOARD = JYE109-13800-00A +F_XTAL = 8000000 +SYSCLOCK_CL = SYSCLK_FREQ_72MHz=72000000 + +# *** This example only supports "FLASH_RUN" *** +# RUN_MODE is passed as define and used for the linker-script filename, +# the user has to implement the necessary operations for +# the used mode(s) (i.e. no copy of .data, remapping) +# Create FLASH-Image +RUN_MODE=FLASH_RUN +# Create RAM-Image +#RUN_MODE=RAM_RUN + +# Exception-vectors placement option is just passed as define, +# the user has to implement the necessary operations (i.e. remapping) +# Exception vectors in FLASH: +ifeq ($(RUN_MODE),RAM_RUN) +VECTOR_TABLE_LOCATION=VECT_TAB_RAM +else +VECTOR_TABLE_LOCATION=VECT_TAB_FLASH +endif + +#VECTOR_TABLE_LOCATION=VECT_TAB_FLASH +# Exception vectors in RAM: +#VECTOR_TABLE_LOCATION=VECT_TAB_RAM + +# Directory for output files (lst, obj, dep, elf, sym, map, hex, bin etc.) +OUTDIR = $(RUN_MODE) + +# Target file name (without extension). +TARGET = 113-13801-037 + +# Pathes to libraries +APPLIBDIR = ./Libraries +STMLIBDIR = $(APPLIBDIR) +STMSPDDIR = $(STMLIBDIR)/STM32F10x_StdPeriph_Driver +STMSPDSRCDIR = $(STMSPDDIR)/src +STMSPDINCDIR = $(STMSPDDIR)/inc +CMSISDIR = $(STMLIBDIR)/CMSIS/CM3/CoreSupport + +# List C source files here. (C dependencies are automatically generated.) +# use file-extension c for "c-only"-files +## Demo-Application: +SRC = 113-13801.c Board.c Common.c Screen.c Command.c stm32f10x_it.c Eeprom.c + +## compiler-specific sources +#SRC += startup_stm32f10x_md_mthomas.c +## CMSIS for STM32 +SRC += $(CMSISDIR)/core_cm3.c +SRC += $(CMSISDIR)/system_stm32f10x.c +## used parts of the STM-Library +SRC += $(STMSPDSRCDIR)/misc.c +SRC += $(STMSPDSRCDIR)/stm32f10x_gpio.c +SRC += $(STMSPDSRCDIR)/stm32f10x_usart.c +SRC += $(STMSPDSRCDIR)/stm32f10x_rcc.c +SRC += $(STMSPDSRCDIR)/stm32f10x_flash.c +#SRC += $(STMSPDSRCDIR)/stm32f10x_spi.c +#SRC += $(STMSPDSRCDIR)/stm32f10x_rtc.c +#SRC += $(STMSPDSRCDIR)/stm32f10x_bkp.c +#SRC += $(STMSPDSRCDIR)/stm32f10x_pwr.c +SRC += $(STMSPDSRCDIR)/stm32f10x_dma.c +SRC += $(STMSPDSRCDIR)/stm32f10x_tim.c +#SRC += $(STMSPDSRCDIR)/stm32f10x_fsmc.c + +# List C source files here which must be compiled in ARM-Mode (no -mthumb). +# use file-extension c for "c-only"-files +SRCARM = + +# List C++ source files here. +# use file-extension .cpp for C++-files (not .C) +#CPPSRC = main.cpp myclasses.cpp +#CPPSRC += mini_cpp.cpp + +# List C++ source files here which must be compiled in ARM-Mode. +# use file-extension .cpp for C++-files (not .C) +#CPPSRCARM = $(TARGET).cpp + +# List Assembler source files here. +# Make them always end in a capital .S. Files ending in a lowercase .s +# will not be considered source files but generated files (assembler +# output from the compiler), and will be deleted upon "make clean"! +# Even though the DOS/Win* filesystem matches both .s and .S the same, +# it will preserve the spelling of the filenames, and gcc itself does +# care about how the name is spelled on its command-line. +ASRC = startup_stm32f10x_md.S + +# List Assembler source files here which must be assembled in ARM-Mode.. +ASRCARM = + +# List any extra directories to look for include files here. +# Each directory must be seperated by a space. +EXTRAINCDIRS = $(STMSPDINCDIR) $(CMSISDIR) $(FATSDDIR) $(MININIDIR) $(STMEEEMULINCDIR) +EXTRAINCDIRS += $(APPLIBDIR) $(SWIMSRCDIR) +EXTRAINCDIRS += C:\Engineering\CodeSourcery G++ Lite\arm-none-eabi\include + +# Extra libraries +# Each library-name must be seperated by a space. +# i.e. to link with libxyz.a, libabc.a and libefsl.a: +# EXTRA_LIBS = xyz abc efsl +# for newlib-lpc (file: libnewlibc-lpc.a): +# EXTRA_LIBS = newlib-lpc +EXTRA_LIBS = dso138 + +# Path to Linker-Scripts +LINKERSCRIPTPATH = . +LINKERSCRIPTINC = . + +# List any extra directories to look for library files here. +# Also add directories where the linker should search for +# includes from linker-script to the list +# Each directory must be seperated by a space. +EXTRA_LIBDIRS = $(LINKERSCRIPTINC) + +# Optimization level, can be [0, 1, 2, 3, s]. +# 0 = turn off optimization. s = optimize for size. +# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) +#OPT = s +OPT = 2 +#OPT = 3 +#OPT = 0 + +# Output format. (can be ihex or binary or both) +# binary to create a load-image in raw-binary format i.e. for SAM-BA, +# ihex to create a load-image in Intel hex format i.e. for lpc21isp +#LOADFORMAT = ihex +#LOADFORMAT = binary +LOADFORMAT = both + +# Using the Atmel AT91_lib produces warnings with +# the default warning-levels. +# yes - disable these warnings +# no - keep default settings +#AT91LIBNOWARN = yes +AT91LIBNOWARN = no + +# Debugging format. +#DEBUG = stabs +#DEBUG = dwarf-2 +DEBUG = gdb + +# Place project-specific -D (define) and/or +# -U options for C here. +CDEFS = -DSTM32F10X_MD +CDEFS += -DHSE_VALUE=$(F_XTAL)UL +CDEFS += -D$(SYSCLOCK_CL) +CDEFS += -DUSE_STDPERIPH_DRIVER +CDEFS += -DUSE_$(BOARD) +CDEFS += -DSTM32_SD_USE_DMA +CDEFS += -DSTARTUP_DELAY +# enable modifications in STM's libraries +CDEFS += -DMOD_MTHOMAS_STMLIB +# enable parameter-checking in STM's library +CDEFS += -DUSE_FULL_ASSERT + +# Place project-specific -D and/or -U options for +# Assembler with preprocessor here. +#ADEFS = -DUSE_IRQ_ASM_WRAPPER +ADEFS = -D__ASSEMBLY__ + +# Compiler flag to set the C Standard level. +# c89 - "ANSI" C +# gnu89 - c89 plus GCC extensions +# c99 - ISO C99 standard (not yet fully implemented) +# gnu99 - c99 plus GCC extensions +CSTANDARD = -std=gnu99 + +#----- + +ifdef VECTOR_TABLE_LOCATION +CDEFS += -D$(VECTOR_TABLE_LOCATION) +ADEFS += -D$(VECTOR_TABLE_LOCATION) +endif + +CDEFS += -D$(RUN_MODE) -D$(CHIP) +ADEFS += -D$(RUN_MODE) -D$(CHIP) + + +# Compiler flags. + +ifeq ($(USE_THUMB_MODE),YES) +THUMB = -mthumb +THUMB_IW = -mthumb-interwork +else +THUMB = +THUMB_IW = +endif + +# -g*: generate debugging information +# -O*: optimization level +# -f...: tuning, see GCC manual and avr-libc documentation +# -Wall...: warning level +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns...: create assembler listing +# +# Flags for C and C++ (arm-elf-gcc/arm-elf-g++) +CFLAGS = -g$(DEBUG) +CFLAGS += -O$(OPT) +CFLAGS += -mcpu=$(MCU) $(THUMB_IW) +CFLAGS += $(CDEFS) +CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) -I. +# when using ".ramfunc"s without longcall: +CFLAGS += -mlong-calls +# -mapcs-frame is important if gcc's interrupt attributes are used +# (at least from my eabi tests), not needed if assembler-wrapper is used +#CFLAGS += -mapcs-frame +#CFLAGS += -fomit-frame-pointer +CFLAGS += -ffunction-sections -fdata-sections +CFLAGS += -fpromote-loop-indices +CFLAGS += -Wall -Wextra +CFLAGS += -Wimplicit -Wcast-align -Wpointer-arith +CFLAGS += -Wredundant-decls -Wshadow -Wcast-qual -Wcast-align +#CFLAGS += -pedantic +CFLAGS += -Wa,-adhlns=$(addprefix $(OUTDIR)/, $(notdir $(addsuffix .lst, $(basename $<)))) +# Compiler flags to generate dependency files: +CFLAGS += -MD -MP -MF $(OUTDIR)/dep/$(@F).d + +# flags only for C +CONLYFLAGS += -Wnested-externs +CONLYFLAGS += $(CSTANDARD) + +# flags only for C++ (arm-*-g++) +CPPFLAGS = -fno-rtti -fno-exceptions +CPPFLAGS = + +# Assembler flags. +# -Wa,...: tell GCC to pass this to the assembler. +# -ahlns: create listing +# -g$(DEBUG): have the assembler create line number information +ASFLAGS = -mcpu=$(MCU) $(THUMB_IW) -I. -x assembler-with-cpp +ASFLAGS += $(ADEFS) +ASFLAGS += -Wa,-adhlns=$(addprefix $(OUTDIR)/, $(notdir $(addsuffix .lst, $(basename $<)))) +ASFLAGS += -Wa,-g$(DEBUG) +ASFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) + +MATH_LIB = -lm + +# Link with the GNU C++ stdlib. +CPLUSPLUS_LIB = -lstdc++ +#CPLUSPLUS_LIB += -lsupc++ + +# Linker flags. +# -Wl,...: tell GCC to pass this to linker. +# -Map: create map file +# --cref: add cross reference to map file +LDFLAGS = -Wl,-Map=$(OUTDIR)/$(TARGET).map,--cref,--gc-sections +#not in CPP +#LDFLAGS += -nostartfiles +LDFLAGS += -lc +LDFLAGS += $(MATH_LIB) +LDFLAGS += -lc -lgcc +LDFLAGS += $(CPLUSPLUS_LIB) +LDFLAGS += $(patsubst %,-L%,$(EXTRA_LIBDIRS)) +LDFLAGS += $(patsubst %,-l%,$(EXTRA_LIBS)) + +#LDFLAGS += -u TIM1_CC_IRQHandler -u ADC1_2_IRQHandler -u DMA1_Channel1_IRQHandler + +# Set linker-script name depending on selected run-mode and submodel name +ifeq ($(RUN_MODE),RAM_RUN) +LDFLAGS +=-T$(LINKERSCRIPTPATH)/$(CHIP)_ram.ld +##LDFLAGS +=-T$(LINKERSCRIPTPATH)/sram.lds +else +LDFLAGS +=-T$(LINKERSCRIPTPATH)/$(CHIP)_flash.ld +#LDFLAGS +=-T$(LINKERSCRIPTPATH)/stm32_flash.ld +#LDFLAGS +=-T$(LINKERSCRIPTPATH)/stm32f10x_flash_offset_1.ld +##LDFLAGS +=-T$(LINKERSCRIPTPATH)/flash.lds +endif + +# --------------------------------------------------------------------------- +# Options for OpenOCD flash-programming +# see openocd.pdf/openocd.texi for further information +# +OOCD_LOADFILE+=$(OUTDIR)/$(TARGET).elf +# if OpenOCD is in the $PATH just set OPENOCDEXE=openocd +OOCD_EXE=./OpenOCD/bin/openocd +# debug level +OOCD_CL=-d0 +#OOCD_CL=-d3 +# interface and board/target settings (using the OOCD target-library here) +## OOCD_CL+=-f interface/jtagkey2.cfg -f target/stm32.cfg +OOCD_CL+=-f interface/jtagkey.cfg -f target/stm32.cfg +# initialize +OOCD_CL+=-c init +# enable "fast mode" - can be disabled for tests +OOCD_CL+=-c "fast enable" +# show the targets +OOCD_CL+=-c targets +# commands to prepare flash-write +OOCD_CL+= -c "reset halt" +# increase JTAG frequency a little bit - can be disabled for tests +OOCD_CL+= -c "jtag_khz 1200" +# flash-write and -verify +OOCD_CL+=-c "flash write_image erase $(OOCD_LOADFILE)" -c "verify_image $(OOCD_LOADFILE)" +# reset target +OOCD_CL+=-c "reset run" +# terminate OOCD after programming +OOCD_CL+=-c shutdown +# --------------------------------------------------------------------------- + +# Define programs and commands. +CC = $(TCHAIN_PREFIX)gcc +CPP = $(TCHAIN_PREFIX)g++ +AR = $(TCHAIN_PREFIX)ar +OBJCOPY = $(TCHAIN_PREFIX)objcopy +OBJDUMP = $(TCHAIN_PREFIX)objdump +SIZE = $(TCHAIN_PREFIX)size +NM = $(TCHAIN_PREFIX)nm +REMOVE = $(REMOVE_CMD) -f +SHELL = sh +###COPY = cp +ifneq ($(or $(COMSPEC), $(ComSpec)),) +$(info COMSPEC detected $(COMSPEC) $(ComSpec)) +ifeq ($(findstring cygdrive,$(shell env)),) +SHELL:=$(or $(COMSPEC),$(ComSpec)) +SHELL_IS_WIN32=1 +else +$(info cygwin detected) +endif +endif +$(info SHELL is $(SHELL)) + +# Define Messages +# English +MSG_ERRORS_NONE = Errors: none +MSG_BEGIN = -------- begin, mode: $(RUN_MODE) -------- +MSG_END = -------- end -------- +MSG_SIZE_BEFORE = Size before: +MSG_SIZE_AFTER = Size after build: +MSG_LOAD_FILE = Creating load file: +MSG_EXTENDED_LISTING = Creating Extended Listing/Disassembly: +MSG_SYMBOL_TABLE = Creating Symbol Table: +MSG_LINKING = ---- Linking : +MSG_COMPILING = ---- Compiling C : +MSG_COMPILING_ARM = ---- Compiling C ARM-only: +MSG_COMPILINGCPP = ---- Compiling C++ : +MSG_COMPILINGCPP_ARM = ---- Compiling C++ ARM-only: +MSG_ASSEMBLING = ---- Assembling: +MSG_ASSEMBLING_ARM = ---- Assembling ARM-only: +MSG_CLEANING = Cleaning project: +MSG_FORMATERROR = Can not handle output-format +MSG_LPC21_RESETREMINDER = You may have to bring the target in bootloader-mode now. +MSG_ASMFROMC = "Creating asm-File from C-Source:" +MSG_ASMFROMC_ARM = "Creating asm-File from C-Source (ARM-only):" + +# List of all source files. +ALLSRC = $(ASRCARM) $(ASRC) $(SRCARM) $(SRC) $(CPPSRCARM) $(CPPSRC) +# List of all source files without directory and file-extension. +ALLSRCBASE = $(notdir $(basename $(ALLSRC))) + +# Define all object files. +ALLOBJ = $(addprefix $(OUTDIR)/, $(addsuffix .o, $(ALLSRCBASE))) + +# Define all listing files (used for make clean). +LSTFILES = $(addprefix $(OUTDIR)/, $(addsuffix .lst, $(ALLSRCBASE))) +# Define all depedency-files (used for make clean). +DEPFILES = $(addprefix $(OUTDIR)/dep/, $(addsuffix .o.d, $(ALLSRCBASE))) + +# Default target. +#all: begin gccversion sizebefore build sizeafter finished end +all: begin createdirs gccversion build sizeafter finished end + +elf: $(OUTDIR)/$(TARGET).elf +lss: $(OUTDIR)/$(TARGET).lss +sym: $(OUTDIR)/$(TARGET).sym +hex: $(OUTDIR)/$(TARGET).hex +bin: $(OUTDIR)/$(TARGET).bin + + +ifeq ($(LOADFORMAT),ihex) +build: elf hex lss sym +else +ifeq ($(LOADFORMAT),binary) +build: elf bin lss sym +else +ifeq ($(LOADFORMAT),both) +build: elf hex bin lss sym +else +$(error "$(MSG_FORMATERROR) $(FORMAT)") +endif +endif +endif + +# Create output directories. +ifdef SHELL_IS_WIN32 +createdirs: + -@md $(OUTDIR) >NUL 2>&1 || echo "" >NUL + -@md $(OUTDIR)\dep >NUL 2>&1 || echo "" >NUL +else +createdirs: + -@mkdir $(OUTDIR) 2>/dev/null || echo "" >/dev/null + -@mkdir $(OUTDIR)/dep 2>/dev/null || echo "" >/dev/null +endif + +# Eye candy. +begin: + @echo $(MSG_BEGIN) + +finished: +## @echo $(MSG_ERRORS_NONE) + +end: + @echo $(MSG_END) + +# Display sizes of sections. +ELFSIZE = $(SIZE) -A $(OUTDIR)/$(TARGET).elf +##ELFSIZE = $(SIZE) --format=Berkeley --common $(OUTDIR)/$(TARGET).elf +sizebefore: +# @if [ -f $(OUTDIR)/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi + +sizeafter: +# @if [ -f $(OUTDIR)/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi + @echo $(MSG_SIZE_AFTER) + $(ELFSIZE) + +# Display compiler version information. +gccversion : + @$(CC) --version +# @echo $(ALLOBJ) + +# Program the device. +ifeq ($(FLASH_TOOL),UVISION) +# Program the device with Keil's uVision (needs configured uVision-workspace). +program: $(OUTDIR)/$(TARGET).hex + @echo "Programming with uVision" + C:\Keil\uv3\Uv3.exe -f uvisionflash.Uv2 -ouvisionflash.txt +else +ifeq ($(FLASH_TOOL),OPENOCD) +# Program the device with Dominic Rath's OPENOCD in "batch-mode", needs cfg and "reset-script". +program: $(OUTDIR)/$(TARGET).elf + @echo "Programming with OPENOCD" +ifdef SHELL_IS_WIN32 + $(subst /,\,$(OOCD_EXE)) $(OOCD_CL) +else + $(OOCD_EXE) $(OOCD_CL) +endif +else +# Program the device using lpc21isp (for NXP2k and ADuC UART bootloader) +program: $(OUTDIR)/$(TARGET).hex + @echo $(MSG_LPC21_RESETREMINDER) + -$(LPC21ISP) $(LPC21ISP_OPTIONS) $(LPC21ISP_FLASHFILE) $(LPC21ISP_PORT) $(LPC21ISP_BAUD) $(LPC21ISP_XTAL) +endif +endif + +# Create final output file (.hex) from ELF output file. +%.hex: %.elf + @echo $(MSG_LOAD_FILE) $@ + $(OBJCOPY) -O ihex $< $@ + +# Create final output file (.bin) from ELF output file. +%.bin: %.elf + @echo $(MSG_LOAD_FILE) $@ + $(OBJCOPY) -O binary $< $@ + +# Create extended listing file/disassambly from ELF output file. +# using objdump testing: option -C +%.lss: %.elf + @echo $(MSG_EXTENDED_LISTING) $@ + $(OBJDUMP) -h -S -C -r $< > $@ +# $(OBJDUMP) -x -S $< > $@ + +# Create a symbol table from ELF output file. +%.sym: %.elf + @echo $(MSG_SYMBOL_TABLE) $@ + $(NM) -n $< > $@ + +# Link: create ELF output file from object files. +.SECONDARY : $(TARGET).elf +.PRECIOUS : $(ALLOBJ) +%.elf: $(ALLOBJ) + @echo $(MSG_LINKING) $@ +# use $(CC) for C-only projects or $(CPP) for C++-projects: +ifeq "$(strip $(CPPSRC)$(CPPARM))" "" + $(CC) $(THUMB) $(CFLAGS) $(ALLOBJ) --output $@ -nostartfiles $(LDFLAGS) +else + $(CPP) $(THUMB) $(CFLAGS) $(ALLOBJ) --output $@ $(LDFLAGS) +endif + + +# Assemble: create object files from assembler source files. +define ASSEMBLE_TEMPLATE +$(OUTDIR)/$(notdir $(basename $(1))).o : $(1) + @echo "hallo" + @echo $(MSG_ASSEMBLING) $$< to $$@ + $(CC) -c $(THUMB) $$(ASFLAGS) $$< -o $$@ +endef +$(foreach src, $(ASRC), $(eval $(call ASSEMBLE_TEMPLATE, $(src)))) + +# Assemble: create object files from assembler source files. ARM-only +define ASSEMBLE_ARM_TEMPLATE +$(OUTDIR)/$(notdir $(basename $(1))).o : $(1) + @echo $(MSG_ASSEMBLING_ARM) $$< to $$@ + $(CC) -c $$(ASFLAGS) $$< -o $$@ +endef +$(foreach src, $(ASRCARM), $(eval $(call ASSEMBLE_ARM_TEMPLATE, $(src)))) + + +# Compile: create object files from C source files. +define COMPILE_C_TEMPLATE +$(OUTDIR)/$(notdir $(basename $(1))).o : $(1) + @echo $(MSG_COMPILING) $$< to $$@ + $(CC) -c $(THUMB) $$(CFLAGS) $$(CONLYFLAGS) $$< -o $$@ +endef +$(foreach src, $(SRC), $(eval $(call COMPILE_C_TEMPLATE, $(src)))) + +# Compile: create object files from C source files. ARM-only +define COMPILE_C_ARM_TEMPLATE +$(OUTDIR)/$(notdir $(basename $(1))).o : $(1) + @echo $(MSG_COMPILING_ARM) $$< to $$@ + $(CC) -c $$(CFLAGS) $$(CONLYFLAGS) $$< -o $$@ +endef +$(foreach src, $(SRCARM), $(eval $(call COMPILE_C_ARM_TEMPLATE, $(src)))) + + +# Compile: create object files from C++ source files. +define COMPILE_CPP_TEMPLATE +$(OUTDIR)/$(notdir $(basename $(1))).o : $(1) + @echo $(MSG_COMPILINGCPP) $$< to $$@ + $(CC) -c $(THUMB) $$(CFLAGS) $$(CPPFLAGS) $$< -o $$@ +endef +$(foreach src, $(CPPSRC), $(eval $(call COMPILE_CPP_TEMPLATE, $(src)))) + +# Compile: create object files from C++ source files. ARM-only +define COMPILE_CPP_ARM_TEMPLATE +$(OUTDIR)/$(notdir $(basename $(1))).o : $(1) + @echo $(MSG_COMPILINGCPP_ARM) $$< to $$@ + $(CC) -c $$(CFLAGS) $$(CPPFLAGS) $$< -o $$@ +endef +$(foreach src, $(CPPSRCARM), $(eval $(call COMPILE_CPP_ARM_TEMPLATE, $(src)))) + + +# Compile: create assembler files from C source files. ARM/Thumb +$(SRC:.c=.s) : %.s : %.c + @echo $(MSG_ASMFROMC) $< to $@ + $(CC) $(THUMB) -S $(CFLAGS) $(CONLYFLAGS) $< -o $@ + +# Compile: create assembler files from C source files. ARM only +$(SRCARM:.c=.s) : %.s : %.c + @echo $(MSG_ASMFROMC_ARM) $< to $@ + $(CC) -S $(CFLAGS) $(CONLYFLAGS) $< -o $@ + +# Target: clean project. +clean: begin clean_list finished end + +clean_list : + @echo $(MSG_CLEANING) + $(REMOVE) $(OUTDIR)/$(TARGET).map + $(REMOVE) $(OUTDIR)/$(TARGET).elf + $(REMOVE) $(OUTDIR)/$(TARGET).hex + $(REMOVE) $(OUTDIR)/$(TARGET).bin + $(REMOVE) $(OUTDIR)/$(TARGET).sym + $(REMOVE) $(OUTDIR)/$(TARGET).lss + $(REMOVE) $(ALLOBJ) + $(REMOVE) $(LSTFILES) + $(REMOVE) $(DEPFILES) + $(REMOVE) $(SRC:.c=.s) + $(REMOVE) $(SRCARM:.c=.s) + $(REMOVE) $(CPPSRC:.cpp=.s) + $(REMOVE) $(CPPSRCARM:.cpp=.s) + +## Create object files directory - now done if special make target +##$(shell mkdir $(OBJDIR) 2>/dev/null) + +# Include the dependency files. +##-include $(shell mkdir dep 2>/dev/null) $(wildcard dep/*) +-include $(wildcard dep/*) + +# Listing of phony targets. +.PHONY : all begin finish end sizebefore sizeafter gccversion \ +build elf hex bin lss sym clean clean_list program createdirs + -- cgit v1.2.3