From b049265321f171fd6db3fa2db09927200d2708c0 Mon Sep 17 00:00:00 2001 From: Dimitri Sokolyuk Date: Tue, 12 May 2015 21:05:57 +0200 Subject: Add OutputDriver decrypter --- enc/Graphtec.enc | Bin 0 -> 60512 bytes enc/Graphtec.ini | 2683 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ enc/enc.go | 43 + 3 files changed, 2726 insertions(+) create mode 100755 enc/Graphtec.enc create mode 100644 enc/Graphtec.ini create mode 100644 enc/enc.go (limited to 'enc') diff --git a/enc/Graphtec.enc b/enc/Graphtec.enc new file mode 100755 index 0000000..91f8024 Binary files /dev/null and b/enc/Graphtec.enc differ diff --git a/enc/Graphtec.ini b/enc/Graphtec.ini new file mode 100644 index 0000000..50ec790 --- /dev/null +++ b/enc/Graphtec.ini @@ -0,0 +1,2683 @@ +{Graphtec GPGL}(3) //(maker type:1-cutter/plotter;2-printer;4-engraver/router) +Version = 3.00 created: 01/16/2006 01:43:00PM + +[CraftROBO cc100-20] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$258,1026,32,17,0,$ +04:$521207818,20,10,1024,2893,$ +05:$8.5/1968.0,$ +06:$8.5,1968,0,0,0,0,$ +07:$CraftROBOcc100$ +- //cutting +08:$pmcutter.dll$ +09:$508.0,0,0,$ +10:$U$ +11:$$ +12:$FM0,TB50,0,&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,Fil$ +- //paper +1000: $8.5/11.0,"Letter",Margin=0.313,0.313,0,0,$ +1001: $8.2677/11.6929,"A4",Margin=0.19685,0.19685,0,0,$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{!(0,Speed,0,10,1,0,1,0,),}{(2,Force,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,7)(2,1,*6,3,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,3)(2,1,*6,2,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,10)(2,1,*6,1,) +- //custom end +- //macro +- //comment + +[CraftROBO cc200-20] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$258,1026,32,17,0,$ +04:$521207819,20,10,1024,2893,$ +05:$8.5/1968.0,$ +06:$8.5,1968,0,0,0,0,$ +07:$CraftROBOcc100$ +- //cutting +08:$pmcutter.dll$ +09:$508.0,0,0,$ +10:$U$ +11:$$ +12:$FM0,TB50,0,&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,Fil$ +- //paper +1000: $8.5/11.0,"Letter",Margin=0.313,0.313,0,0,$ +1001: $8.2677/11.6929,"A4",Margin=0.19685,0.19685,0,0,$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{!(0,Speed,0,10,1,0,1,0,),}{(2,Force,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,7)(2,1,*6,3,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,3)(2,1,*6,2,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,10)(2,1,*6,1,) +- //custom end +- //macro +- //comment + +[CraftROBO cc300-20] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$258,1026,32,17,0,$ +04:$521207858,20,10,1024,2893,$ +05:$8.2677/1968.0,$ +06:$8.2677,1968,0,0,0,0,$ +07:$CraftROBOcc300$ +- //cutting +08:$pmcutter.dll$ +09:$508.0,0,0,$ +10:$U$ +11:$$ +12:$FM0,TB50,0,&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,Fil$ +- //paper +1000: $8.2677/11.6929,"A4",Margin=0.19685,0.19685,0,0,$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{!(0,Speed,0,7,1,0,1,0,),}{(2,Force,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,7)(2,1,*6,3,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,3)(2,1,*6,2,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,10)(2,1,*6,1,) +- //custom end +- //macro +- //comment + +[CraftROBO cc300L-20] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$258,1026,32,17,0,$ +04:$521207859,20,10,1024,2893,$ +05:$8.5/1968.0,$ +06:$8.5,1968,0,0,0,0,$ +07:$CraftROBOcc300L$ +- //cutting +08:$pmcutter.dll$ +09:$508.0,0,0,$ +10:$U$ +11:$$ +12:$FM0,TB50,0,&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,Fil$ +- //paper +1000: $8.5/11.0,"Letter",Margin=0.313,0.313,0,0,$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{!(0,Speed,0,7,1,0,1,0,),}{(2,Force,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,7)(2,1,*6,3,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,3)(2,1,*6,2,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,10)(2,1,*6,1,) +- //custom end +- //macro +- //comment + +[CraftROBO cc330-20] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$258,1026,32,17,0,$ +04:$521207860,20,10,1024,2893,$ +05:$8.2677/1968.0,$ +06:$8.2677,1968,0,0,0,0,$ +07:$CraftROBOcc330$ +- //cutting +08:$pmcutter.dll$ +09:$508.0,0,0,$ +10:$U$ +11:$$ +12:$FM0,TB50,0,&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,Fil$ +- //paper +1000: $8.2677/11.6929,"A4",Margin=0.19685,0.19685,0,0,$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{!(0,Speed,0,10,1,0,1,0,),}{(2,Force,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,7)(2,1,*6,3,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,3)(2,1,*6,2,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,10)(2,1,*6,1,) +- //custom end +- //macro +- //comment + +[CraftROBO cc330L-20] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$258,1026,32,17,0,$ +04:$521207861,20,10,1024,2893,$ +05:$8.5/1968.0,$ +06:$8.5,1968,0,0,0,0,$ +07:$CraftROBOcc330L$ +- //cutting +08:$pmcutter.dll$ +09:$508.0,0,0,$ +10:$U$ +11:$$ +12:$FM0,TB50,0,&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,Fil$ +- //paper +1000: $8.5/11.0,"Letter",Margin=0.313,0.313,0,0,$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{!(0,Speed,0,10,1,0,1,0,),}{(2,Force,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,7)(2,1,*6,3,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,3)(2,1,*6,2,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,10)(2,1,*6,1,) +- //custom end +- //macro +- //comment + + + +[CE3000-40] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207820,20,10,1024,2893,$ +05:$15.0/1968.0,$ +06:$15.0,1968,0,0,0,0,$ +07:$CE3000-40$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,0,4,1,0,1,0,),}{!(0,Speed,0,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + +[CE3000-60] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207821,20,10,1024,2893,$ +05:$24/1968.0,$ +06:$24,1968,0,0,0,0,$ +07:$CE3000-60$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,0,4,1,0,1,0,),}{!(0,Speed,0,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + +[CE3000-120] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207822,20,10,1024,2893,$ +05:$48/1968.0,$ +06:$48,1968,0,0,0,0,$ +07:$CE3000-120$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + +[CE3000-40-CRP] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207848,20,10,1024,2893,$ +05:$16/1968.0,$ +06:$16,1968,0,0,0,0,$ +07:$CE3000-40-CRP$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,0,4,1,0,1,0,),}{!(0,Speed,0,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + +[CE3000Mk2-60] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207840,20,10,1024,2893,$ +05:$24/1968.0,$ +06:$24,1968,0,0,0,0,$ +07:$CE3000MkII-60$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,0,4,1,0,1,0,),}{!(0,Speed,0,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + +[CE3000Mk2-120] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207841,20,10,1024,2893,$ +05:$48/1968.0,$ +06:$48,1968,0,0,0,0,$ +07:$CE3000MkII-120$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + +[CE5000-40-CRP] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207849,20,10,1024,2893,$ +05:$16/1968.0,$ +06:$16,1968,0,0,0,0,$ +07:$CE5000-40-CRP$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,0,4,1,0,1,0,),}{!(0,Speed,0,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + +[CE5000-60] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207842,20,10,1024,2893,$ +05:$24/1968.0,$ +06:$24,1968,0,0,0,0,$ +07:$CE5000-60$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,0,4,1,0,1,0,),}{!(0,Speed,0,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + +[CE5000-120] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207843,20,10,1024,2893,$ +05:$48/1968.0,$ +06:$48,1968,0,0,0,0,$ +07:$CE5000-120$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + +[FC223X-60] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$8192,1049602,32,17,0,$ +04:$521207823,20,10,1024,2893,$ +05:$36.2204724/24.015748,$ +06:$36.2204724,24.015748,0,0,0,0,$ +07:$FC223X-60$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + +[FC223X-90] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$8192,1049602,32,17,0,$ +04:$521207824,20,10,1024,2893,$ +05:$36.2204724/47.2440945.0,$ +06:$36.2204724,47.2440945,0,0,0,0,$ +07:$FC223X-90$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + +[FC2240-60] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$8192,1049602,32,17,0,$ +04:$521207825,20,10,1024,2893,$ +05:$36.2204724/24.015748,$ +06:$36.2204724,24.015748,0,0,0,0,$ +07:$FC2240-60$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,8,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + +[FC2240-120] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$8192,1049602,32,17,0,$ +04:$521207826,20,10,1024,2893,$ +05:$36.2204724/47.2440945,$ +06:$36.2204724,47.2440945,0,0,0,0,$ +07:$FC2240-120$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,8,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + +[FC2240-180] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$8192,1049602,32,17,0,$ +04:$521207827,20,10,1024,2893,$ +05:$36.2204724/70.8661417,$ +06:$36.2204724,70.8661417,0,0,0,0,$ +07:$FC2240-180$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,8,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + +[FC2250-60] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$8192,1049602,32,17,0,$ +04:$521207850,20,10,1024,2893,$ +05:$36.2204724/24.015748,$ +06:$36.2204724,24.015748,0,0,0,0,$ +07:$FC2250-60$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,8,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + +[FC2250-120] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$8192,1049602,32,17,0,$ +04:$521207851,20,10,1024,2893,$ +05:$36.2204724/47.2440945,$ +06:$36.2204724,47.2440945,0,0,0,0,$ +07:$FC2250-120$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,8,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + +[FC2250-180] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$8192,1049602,32,17,0,$ +04:$521207852,20,10,1024,2893,$ +05:$36.2204724/70.8661417,$ +06:$36.2204724,70.8661417,0,0,0,0,$ +07:$FC2250-180$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,8,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + +[FC3600] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$8192,1049602,32,17,0,$ +04:$521207828,20,10,1024,2893,$ +05:$48/1968.0,$ +06:$48,1968,0,0,0,0,$ +07:$FC3600$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + + +[FC4200-50] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$8192,1049602,32,17,0,$ +04:$521207829,20,10,1024,2893,$ +05:$16.929/23.2283,$ +06:$16.929,23.2283,0,0,0,0,$ +07:$FC4200-50$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + +[FC4200-60] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$8192,1049602,32,17,0,$ +04:$521207830,20,10,1024,2893,$ +05:$24.01575/35.8268,$ +06:$24.01575,35.8268,0,0,0,0,$ +07:$FC4200-60$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + +[FC5100-75] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207831,20,10,1024,2893,$ +05:$29.6/1968.0,$ +06:$29.6,1968,0,0,0,0,$ +07:$FC5100-75$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + +[FC5100-100] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207832,20,10,1024,2893,$ +05:$41.6/1968.0,$ +06:$41.6,1968,0,0,0,0,$ +07:$FC5100-100$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + +[FC5100-130] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207833,20,10,1024,2893,$ +05:$54.0/1968.0,$ +06:$54.0,1968,0,0,0,0,$ +07:$FC5100-130$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + +[FC5100-150] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207834,20,10,1024,2893,$ +05:$59.6/1968.0,$ +06:$59.6,1968,0,0,0,0,$ +07:$FC5100-150$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + +[FC5100A-75] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207844,20,10,1024,2893,$ +05:$29.6/1968.0,$ +06:$29.6,1968,0,0,0,0,$ +07:$FC5100A-75$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + +[FC5100A-100] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207845,20,10,1024,2893,$ +05:$41.6/1968.0,$ +06:$41.6,1968,0,0,0,0,$ +07:$FC5100A-100$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + +[FC5100A-130] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207846,20,10,1024,2893,$ +05:$54.0/1968.0,$ +06:$54.0,1968,0,0,0,0,$ +07:$FC5100A-130$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + +[FC5100A-150] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207847,20,10,1024,2893,$ +05:$59.6/1968.0,$ +06:$59.6,1968,0,0,0,0,$ +07:$FC5100A-150$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + +[FC7000-60] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207850,20,10,1024,2893,$ +05:$23.622/1968.0,$ +06:$23.622,1968,0,0,0,0,$ +07:$FC7000-60$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end += {(2,Cut Media,)} +Cut media = (2,0,F1,1,) +- //macro +- //comment + +[FC7000-75] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207835,20,10,1024,2893,$ +05:$29.6/1968.0,$ +06:$29.6,1968,0,0,0,0,$ +07:$FC7000-75$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end += {(2,Cut Media,)} +Cut media = (2,0,F1,1,) +- //macro +- //comment + +[FC7000-100] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207836,20,10,1024,2893,$ +05:$41.6/1968.0,$ +06:$41.6,1968,0,0,0,0,$ +07:$FC7000-100$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end += {(2,Cut Media,)} +Cut media = (2,0,F1,1,) +- //macro +- //comment + +[FC7000-130] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207837,20,10,1024,2893,$ +05:$54.0/1968.0,$ +06:$54.0,1968,0,0,0,0,$ +07:$FC7000-130$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end += {(2,Cut Media,)} +Cut media = (2,0,F1,1,) +- //macro +- //comment + +[FC7000-160] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207838,20,10,1024,2893,$ +05:$63/1968.0,$ +06:$63,1968,0,0,0,0,$ +07:$FC7000-160$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end += {(2,Cut Media,)} +Cut media = (2,0,F1,1,) +- //macro +- //comment + +[FC8000-60] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207853,20,10,1024,2893,$ +05:$23.622/1968.0,$ +06:$23.622,1968,0,0,0,0,$ +07:$FC8000-60$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,TCP/IP,LPR,FTP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}{(2,Step size,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)(2,0,) +- //custom end += {(2,Cut Media,)} +Cut media = (2,0,F1,1,) +- //macro +- //comment + +[FC8000-75] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207854,20,10,1024,2893,$ +05:$29.6/1968.0,$ +06:$29.6,1968,0,0,0,0,$ +07:$FC8000-75$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,TCP/IP,LPR,FTP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}{(2,Step size,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)(2,0,) +- //custom end += {(2,Cut Media,)} +Cut media = (2,0,F1,1,) +- //macro +- //comment + +[FC8000-100] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207855,20,10,1024,2893,$ +05:$41.6/1968.0,$ +06:$41.6,1968,0,0,0,0,$ +07:$FC8000-100$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,TCP/IP,LPR,FTP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}{(2,Step size,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)(2,0,) +- //custom end += {(2,Cut Media,)} +Cut media = (2,0,F1,1,) +- //macro +- //comment + +[FC8000-130] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207856,20,10,1024,2893,$ +05:$54.0/1968.0,$ +06:$54.0,1968,0,0,0,0,$ +07:$FC8000-130$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,TCP/IP,LPR,FTP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}{(2,Step size,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)(2,0,) +- //custom end += {(2,Cut Media,)} +Cut media = (2,0,F1,1,) +- //macro +- //comment + +[FC8000-160] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207857,20,10,1024,2893,$ +05:$63/1968.0,$ +06:$63,1968,0,0,0,0,$ +07:$FC8000-160$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,TCP/IP,LPR,FTP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}{(2,Step size,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)(2,0,) +- //custom end += {(2,Cut Media,)} +Cut media = (2,0,F1,1,) +- //macro +- //comment + +[FC612] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$8192,1049602,32,17,0,$ +04:$521207839,20,10,1024,2893,$ +05:$49.6063/35.43307,$ +06:$49.6063,35.43307,0,0,0,0,$ +07:$FC612$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + + +[FC4500-50] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$8192,1049602,32,17,0,$ +04:$521207829,20,10,1024,2893,$ +05:$16.9291/23.2283,$ +06:$16.9291,23.2283,0,0,0,0,$ +07:$FC4500-50$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + +[FC4500-60] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$8192,1049602,32,17,0,$ +04:$521207830,20,10,1024,2893,$ +05:$24.0157/35.8268,$ +06:$24.0157,35.8268,0,0,0,0,$ +07:$FC4500-60$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + +[FC4510-60] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$8192,1049602,32,17,0,$ +04:$521207862,20,10,1024,2893,$ +05:$23.6220/33.8583,$ +06:$23.6220,33.8583,0,0,0,0,$ +07:$FC4510-60$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + +[CE6000-40] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207842,20,10,1024,2893,$ +05:$16/1968.0,$ +06:$16,1968,0,0,0,0,$ +07:$CE6000-40$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,0,4,1,0,1,0,),}{!(0,Speed,0,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + +[CE6000-60] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207842,20,10,1024,2893,$ +05:$24/1968.0,$ +06:$24,1968,0,0,0,0,$ +07:$CE6000-60$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,0,4,1,0,1,0,),}{!(0,Speed,0,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + +[CE6000-120] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207843,20,10,1024,2893,$ +05:$48/1968.0,$ +06:$48,1968,0,0,0,0,$ +07:$CE6000-120$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) +- //custom end +- //macro +- //comment + +[FC8600-60] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207853,20,10,1024,2893,$ +05:$23.622/1968.0,$ +06:$23.622,1968,0,0,0,0,$ +07:$FC8600-60$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,TCP/IP,LPR,FTP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}{(2,Step size,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)(2,0,) +- //custom end += {(2,Cut Media,)} +Cut media = (2,0,F1,1,) +- //macro +- //comment + +[FC8600-75] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207854,20,10,1024,2893,$ +05:$29.6/1968.0,$ +06:$29.6,1968,0,0,0,0,$ +07:$FC8600-75$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,TCP/IP,LPR,FTP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}{(2,Step size,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)(2,0,) +- //custom end += {(2,Cut Media,)} +Cut media = (2,0,F1,1,) +- //macro +- //comment + +[FC8600-100] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207855,20,10,1024,2893,$ +05:$41.6/1968.0,$ +06:$41.6,1968,0,0,0,0,$ +07:$FC8600-100$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,TCP/IP,LPR,FTP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}{(2,Step size,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)(2,0,) +- //custom end += {(2,Cut Media,)} +Cut media = (2,0,F1,1,) +- //macro +- //comment + +[FC8600-130] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207856,20,10,1024,2893,$ +05:$54.0/1968.0,$ +06:$54.0,1968,0,0,0,0,$ +07:$FC8600-130$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,TCP/IP,LPR,FTP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}{(2,Step size,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)(2,0,) +- //custom end += {(2,Cut Media,)} +Cut media = (2,0,F1,1,) +- //macro +- //comment + +[FC8600-160] +01:$9600,n,8,1,$ +02:$0,19,$ +03:$0,1049602,32,17,0,$ +04:$521207857,20,10,1024,2893,$ +05:$63/1968.0,$ +06:$63,1968,0,0,0,0,$ +07:$FC8600-160$ +- //cutting +08:$pmcutter.dll$ +09:$254.0,0,0,33,2155872454,7$ +10:$U$ +11:$$ +12:$&100,100,100,^0,0,\0,0,$ +13:$$ +14:$M%ld,0,SO0,$ +15:$5,,,1,31,*1,%ld,$ +16:$$ +17:$0,$ +18:$$ +19:$$ +20:$D%ld,%ld,$ +21:$M%ld,%ld,$ +22:$$ +23:$$ +24:$$ +25:$$ +26:$$ +27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ +28:$$ +29:$G$ +30:$$ +31:$$ +32:$$ +33:$$ +- //engraving +- //printing +300:$GraphtecUSB,COM,TCP/IP,LPR,FTP,Fil$ +- //custom head += {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}{(2,Step size,)} +Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)(2,0,) +Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)(2,0,) +Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)(2,0,) +- //custom end += {(2,Cut Media,)} +Cut media = (2,0,F1,1,) +- //macro +- //comment + \ No newline at end of file diff --git a/enc/enc.go b/enc/enc.go new file mode 100644 index 0000000..3b89dfd --- /dev/null +++ b/enc/enc.go @@ -0,0 +1,43 @@ +// Decrypt Graphtec files +package main + +import ( + "bytes" + "crypto/cipher" + "crypto/des" + "flag" + "fmt" + "io/ioutil" + "log" +) + +var ( + magic = []byte{0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99} + key = []byte{0x32, 0x5d, 0xbc, 0x97, 0xa8, 0xa1, 0x26, 0x08} + zero = []byte{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} + file = flag.String("file", "Graphtec.enc", "file name") +) + +func main() { + flag.Parse() + + f, err := ioutil.ReadFile(*file) + if err != nil { + log.Fatal(err) + } + + if !bytes.Equal(f[:8], magic) { + log.Fatal("bad magic") + } + + block, err := des.NewCipher(key) + if err != nil { + log.Fatal(err) + } + + data := f[0x88:] + mode := cipher.NewCBCDecrypter(block, zero) + mode.CryptBlocks(data, data) + + fmt.Print(string(data)) +} -- cgit v1.2.3