{Graphtec GPGL}(3) //(maker type:1-cutter/plotter;2-printer;4-engraver/router) Version = 3.00 created: 01/16/2006 01:43:00PM [CraftROBO cc100-20] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$258,1026,32,17,0,$ 04:$521207818,20,10,1024,2893,$ 05:$8.5/1968.0,$ 06:$8.5,1968,0,0,0,0,$ 07:$CraftROBOcc100$ - //cutting 08:$pmcutter.dll$ 09:$508.0,0,0,$ 10:$U$ 11:$$ 12:$FM0,TB50,0,&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,Fil$ - //paper 1000: $8.5/11.0,"Letter",Margin=0.313,0.313,0,0,$ 1001: $8.2677/11.6929,"A4",Margin=0.19685,0.19685,0,0,$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{!(0,Speed,0,10,1,0,1,0,),}{(2,Force,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,7)(2,1,*6,3,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,3)(2,1,*6,2,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,10)(2,1,*6,1,) - //custom end - //macro - //comment [CraftROBO cc200-20] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$258,1026,32,17,0,$ 04:$521207819,20,10,1024,2893,$ 05:$8.5/1968.0,$ 06:$8.5,1968,0,0,0,0,$ 07:$CraftROBOcc100$ - //cutting 08:$pmcutter.dll$ 09:$508.0,0,0,$ 10:$U$ 11:$$ 12:$FM0,TB50,0,&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,Fil$ - //paper 1000: $8.5/11.0,"Letter",Margin=0.313,0.313,0,0,$ 1001: $8.2677/11.6929,"A4",Margin=0.19685,0.19685,0,0,$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{!(0,Speed,0,10,1,0,1,0,),}{(2,Force,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,7)(2,1,*6,3,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,3)(2,1,*6,2,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,10)(2,1,*6,1,) - //custom end - //macro - //comment [CraftROBO cc300-20] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$258,1026,32,17,0,$ 04:$521207858,20,10,1024,2893,$ 05:$8.2677/1968.0,$ 06:$8.2677,1968,0,0,0,0,$ 07:$CraftROBOcc300$ - //cutting 08:$pmcutter.dll$ 09:$508.0,0,0,$ 10:$U$ 11:$$ 12:$FM0,TB50,0,&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,Fil$ - //paper 1000: $8.2677/11.6929,"A4",Margin=0.19685,0.19685,0,0,$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{!(0,Speed,0,7,1,0,1,0,),}{(2,Force,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,7)(2,1,*6,3,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,3)(2,1,*6,2,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,10)(2,1,*6,1,) - //custom end - //macro - //comment [CraftROBO cc300L-20] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$258,1026,32,17,0,$ 04:$521207859,20,10,1024,2893,$ 05:$8.5/1968.0,$ 06:$8.5,1968,0,0,0,0,$ 07:$CraftROBOcc300L$ - //cutting 08:$pmcutter.dll$ 09:$508.0,0,0,$ 10:$U$ 11:$$ 12:$FM0,TB50,0,&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,Fil$ - //paper 1000: $8.5/11.0,"Letter",Margin=0.313,0.313,0,0,$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{!(0,Speed,0,7,1,0,1,0,),}{(2,Force,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,7)(2,1,*6,3,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,3)(2,1,*6,2,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,10)(2,1,*6,1,) - //custom end - //macro - //comment [CraftROBO cc330-20] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$258,1026,32,17,0,$ 04:$521207860,20,10,1024,2893,$ 05:$8.2677/1968.0,$ 06:$8.2677,1968,0,0,0,0,$ 07:$CraftROBOcc330$ - //cutting 08:$pmcutter.dll$ 09:$508.0,0,0,$ 10:$U$ 11:$$ 12:$FM0,TB50,0,&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,Fil$ - //paper 1000: $8.2677/11.6929,"A4",Margin=0.19685,0.19685,0,0,$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{!(0,Speed,0,10,1,0,1,0,),}{(2,Force,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,7)(2,1,*6,3,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,3)(2,1,*6,2,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,10)(2,1,*6,1,) - //custom end - //macro - //comment [CraftROBO cc330L-20] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$258,1026,32,17,0,$ 04:$521207861,20,10,1024,2893,$ 05:$8.5/1968.0,$ 06:$8.5,1968,0,0,0,0,$ 07:$CraftROBOcc330L$ - //cutting 08:$pmcutter.dll$ 09:$508.0,0,0,$ 10:$U$ 11:$$ 12:$FM0,TB50,0,&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,Fil$ - //paper 1000: $8.5/11.0,"Letter",Margin=0.313,0.313,0,0,$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{!(0,Speed,0,10,1,0,1,0,),}{(2,Force,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,7)(2,1,*6,3,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,3)(2,1,*6,2,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,10)(2,1,*6,1,) - //custom end - //macro - //comment [CE3000-40] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207820,20,10,1024,2893,$ 05:$15.0/1968.0,$ 06:$15.0,1968,0,0,0,0,$ 07:$CE3000-40$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,0,4,1,0,1,0,),}{!(0,Speed,0,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [CE3000-60] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207821,20,10,1024,2893,$ 05:$24/1968.0,$ 06:$24,1968,0,0,0,0,$ 07:$CE3000-60$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,0,4,1,0,1,0,),}{!(0,Speed,0,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [CE3000-120] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207822,20,10,1024,2893,$ 05:$48/1968.0,$ 06:$48,1968,0,0,0,0,$ 07:$CE3000-120$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [CE3000-40-CRP] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207848,20,10,1024,2893,$ 05:$16/1968.0,$ 06:$16,1968,0,0,0,0,$ 07:$CE3000-40-CRP$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,0,4,1,0,1,0,),}{!(0,Speed,0,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [CE3000Mk2-60] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207840,20,10,1024,2893,$ 05:$24/1968.0,$ 06:$24,1968,0,0,0,0,$ 07:$CE3000MkII-60$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,0,4,1,0,1,0,),}{!(0,Speed,0,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [CE3000Mk2-120] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207841,20,10,1024,2893,$ 05:$48/1968.0,$ 06:$48,1968,0,0,0,0,$ 07:$CE3000MkII-120$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [CE5000-40-CRP] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207849,20,10,1024,2893,$ 05:$16/1968.0,$ 06:$16,1968,0,0,0,0,$ 07:$CE5000-40-CRP$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,0,4,1,0,1,0,),}{!(0,Speed,0,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [CE5000-60] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207842,20,10,1024,2893,$ 05:$24/1968.0,$ 06:$24,1968,0,0,0,0,$ 07:$CE5000-60$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,0,4,1,0,1,0,),}{!(0,Speed,0,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [CE5000-120] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207843,20,10,1024,2893,$ 05:$48/1968.0,$ 06:$48,1968,0,0,0,0,$ 07:$CE5000-120$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [FC223X-60] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$8192,1049602,32,17,0,$ 04:$521207823,20,10,1024,2893,$ 05:$36.2204724/24.015748,$ 06:$36.2204724,24.015748,0,0,0,0,$ 07:$FC223X-60$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [FC223X-90] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$8192,1049602,32,17,0,$ 04:$521207824,20,10,1024,2893,$ 05:$36.2204724/47.2440945.0,$ 06:$36.2204724,47.2440945,0,0,0,0,$ 07:$FC223X-90$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [FC2240-60] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$8192,1049602,32,17,0,$ 04:$521207825,20,10,1024,2893,$ 05:$36.2204724/24.015748,$ 06:$36.2204724,24.015748,0,0,0,0,$ 07:$FC2240-60$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,8,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [FC2240-120] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$8192,1049602,32,17,0,$ 04:$521207826,20,10,1024,2893,$ 05:$36.2204724/47.2440945,$ 06:$36.2204724,47.2440945,0,0,0,0,$ 07:$FC2240-120$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,8,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [FC2240-180] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$8192,1049602,32,17,0,$ 04:$521207827,20,10,1024,2893,$ 05:$36.2204724/70.8661417,$ 06:$36.2204724,70.8661417,0,0,0,0,$ 07:$FC2240-180$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,8,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [FC2250-60] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$8192,1049602,32,17,0,$ 04:$521207850,20,10,1024,2893,$ 05:$36.2204724/24.015748,$ 06:$36.2204724,24.015748,0,0,0,0,$ 07:$FC2250-60$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,8,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [FC2250-120] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$8192,1049602,32,17,0,$ 04:$521207851,20,10,1024,2893,$ 05:$36.2204724/47.2440945,$ 06:$36.2204724,47.2440945,0,0,0,0,$ 07:$FC2250-120$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,8,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [FC2250-180] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$8192,1049602,32,17,0,$ 04:$521207852,20,10,1024,2893,$ 05:$36.2204724/70.8661417,$ 06:$36.2204724,70.8661417,0,0,0,0,$ 07:$FC2250-180$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,8,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [FC3600] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$8192,1049602,32,17,0,$ 04:$521207828,20,10,1024,2893,$ 05:$48/1968.0,$ 06:$48,1968,0,0,0,0,$ 07:$FC3600$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [FC4200-50] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$8192,1049602,32,17,0,$ 04:$521207829,20,10,1024,2893,$ 05:$16.929/23.2283,$ 06:$16.929,23.2283,0,0,0,0,$ 07:$FC4200-50$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [FC4200-60] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$8192,1049602,32,17,0,$ 04:$521207830,20,10,1024,2893,$ 05:$24.01575/35.8268,$ 06:$24.01575,35.8268,0,0,0,0,$ 07:$FC4200-60$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [FC5100-75] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207831,20,10,1024,2893,$ 05:$29.6/1968.0,$ 06:$29.6,1968,0,0,0,0,$ 07:$FC5100-75$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [FC5100-100] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207832,20,10,1024,2893,$ 05:$41.6/1968.0,$ 06:$41.6,1968,0,0,0,0,$ 07:$FC5100-100$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [FC5100-130] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207833,20,10,1024,2893,$ 05:$54.0/1968.0,$ 06:$54.0,1968,0,0,0,0,$ 07:$FC5100-130$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [FC5100-150] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207834,20,10,1024,2893,$ 05:$59.6/1968.0,$ 06:$59.6,1968,0,0,0,0,$ 07:$FC5100-150$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [FC5100A-75] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207844,20,10,1024,2893,$ 05:$29.6/1968.0,$ 06:$29.6,1968,0,0,0,0,$ 07:$FC5100A-75$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [FC5100A-100] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207845,20,10,1024,2893,$ 05:$41.6/1968.0,$ 06:$41.6,1968,0,0,0,0,$ 07:$FC5100A-100$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [FC5100A-130] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207846,20,10,1024,2893,$ 05:$54.0/1968.0,$ 06:$54.0,1968,0,0,0,0,$ 07:$FC5100A-130$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [FC5100A-150] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207847,20,10,1024,2893,$ 05:$59.6/1968.0,$ 06:$59.6,1968,0,0,0,0,$ 07:$FC5100A-150$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [FC7000-60] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207850,20,10,1024,2893,$ 05:$23.622/1968.0,$ 06:$23.622,1968,0,0,0,0,$ 07:$FC7000-60$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end = {(2,Cut Media,)} Cut media = (2,0,F1,1,) - //macro - //comment [FC7000-75] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207835,20,10,1024,2893,$ 05:$29.6/1968.0,$ 06:$29.6,1968,0,0,0,0,$ 07:$FC7000-75$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end = {(2,Cut Media,)} Cut media = (2,0,F1,1,) - //macro - //comment [FC7000-100] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207836,20,10,1024,2893,$ 05:$41.6/1968.0,$ 06:$41.6,1968,0,0,0,0,$ 07:$FC7000-100$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end = {(2,Cut Media,)} Cut media = (2,0,F1,1,) - //macro - //comment [FC7000-130] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207837,20,10,1024,2893,$ 05:$54.0/1968.0,$ 06:$54.0,1968,0,0,0,0,$ 07:$FC7000-130$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end = {(2,Cut Media,)} Cut media = (2,0,F1,1,) - //macro - //comment [FC7000-160] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207838,20,10,1024,2893,$ 05:$63/1968.0,$ 06:$63,1968,0,0,0,0,$ 07:$FC7000-160$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end = {(2,Cut Media,)} Cut media = (2,0,F1,1,) - //macro - //comment [FC8000-60] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207853,20,10,1024,2893,$ 05:$23.622/1968.0,$ 06:$23.622,1968,0,0,0,0,$ 07:$FC8000-60$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,TCP/IP,LPR,FTP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}{(2,Step size,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)(2,0,) - //custom end = {(2,Cut Media,)} Cut media = (2,0,F1,1,) - //macro - //comment [FC8000-75] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207854,20,10,1024,2893,$ 05:$29.6/1968.0,$ 06:$29.6,1968,0,0,0,0,$ 07:$FC8000-75$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,TCP/IP,LPR,FTP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}{(2,Step size,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)(2,0,) - //custom end = {(2,Cut Media,)} Cut media = (2,0,F1,1,) - //macro - //comment [FC8000-100] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207855,20,10,1024,2893,$ 05:$41.6/1968.0,$ 06:$41.6,1968,0,0,0,0,$ 07:$FC8000-100$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,TCP/IP,LPR,FTP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}{(2,Step size,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)(2,0,) - //custom end = {(2,Cut Media,)} Cut media = (2,0,F1,1,) - //macro - //comment [FC8000-130] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207856,20,10,1024,2893,$ 05:$54.0/1968.0,$ 06:$54.0,1968,0,0,0,0,$ 07:$FC8000-130$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,TCP/IP,LPR,FTP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}{(2,Step size,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)(2,0,) - //custom end = {(2,Cut Media,)} Cut media = (2,0,F1,1,) - //macro - //comment [FC8000-160] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207857,20,10,1024,2893,$ 05:$63/1968.0,$ 06:$63,1968,0,0,0,0,$ 07:$FC8000-160$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,TCP/IP,LPR,FTP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}{(2,Step size,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)(2,0,) - //custom end = {(2,Cut Media,)} Cut media = (2,0,F1,1,) - //macro - //comment [FC612] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$8192,1049602,32,17,0,$ 04:$521207839,20,10,1024,2893,$ 05:$49.6063/35.43307,$ 06:$49.6063,35.43307,0,0,0,0,$ 07:$FC612$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [FC4500-50] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$8192,1049602,32,17,0,$ 04:$521207829,20,10,1024,2893,$ 05:$16.9291/23.2283,$ 06:$16.9291,23.2283,0,0,0,0,$ 07:$FC4500-50$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [FC4500-60] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$8192,1049602,32,17,0,$ 04:$521207830,20,10,1024,2893,$ 05:$24.0157/35.8268,$ 06:$24.0157,35.8268,0,0,0,0,$ 07:$FC4500-60$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [FC4510-60] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$8192,1049602,32,17,0,$ 04:$521207862,20,10,1024,2893,$ 05:$23.6220/33.8583,$ 06:$23.6220,33.8583,0,0,0,0,$ 07:$FC4510-60$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [CE6000-40] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207842,20,10,1024,2893,$ 05:$16/1968.0,$ 06:$16,1968,0,0,0,0,$ 07:$CE6000-40$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,0,4,1,0,1,0,),}{!(0,Speed,0,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [CE6000-60] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207842,20,10,1024,2893,$ 05:$24/1968.0,$ 06:$24,1968,0,0,0,0,$ 07:$CE6000-60$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,0,4,1,0,1,0,),}{!(0,Speed,0,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [CE6000-120] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207843,20,10,1024,2893,$ 05:$48/1968.0,$ 06:$48,1968,0,0,0,0,$ 07:$CE6000-120$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,LPT,TCP/IP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,) - //custom end - //macro - //comment [FC8600-60] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207853,20,10,1024,2893,$ 05:$23.622/1968.0,$ 06:$23.622,1968,0,0,0,0,$ 07:$FC8600-60$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,TCP/IP,LPR,FTP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}{(2,Step size,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)(2,0,) - //custom end = {(2,Cut Media,)} Cut media = (2,0,F1,1,) - //macro - //comment [FC8600-75] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207854,20,10,1024,2893,$ 05:$29.6/1968.0,$ 06:$29.6,1968,0,0,0,0,$ 07:$FC8600-75$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,TCP/IP,LPR,FTP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}{(2,Step size,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)(2,0,) - //custom end = {(2,Cut Media,)} Cut media = (2,0,F1,1,) - //macro - //comment [FC8600-100] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207855,20,10,1024,2893,$ 05:$41.6/1968.0,$ 06:$41.6,1968,0,0,0,0,$ 07:$FC8600-100$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,TCP/IP,LPR,FTP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}{(2,Step size,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)(2,0,) - //custom end = {(2,Cut Media,)} Cut media = (2,0,F1,1,) - //macro - //comment [FC8600-130] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207856,20,10,1024,2893,$ 05:$54.0/1968.0,$ 06:$54.0,1968,0,0,0,0,$ 07:$FC8600-130$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,TCP/IP,LPR,FTP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}{(2,Step size,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)(2,0,) - //custom end = {(2,Cut Media,)} Cut media = (2,0,F1,1,) - //macro - //comment [FC8600-160] 01:$9600,n,8,1,$ 02:$0,19,$ 03:$0,1049602,32,17,0,$ 04:$521207857,20,10,1024,2893,$ 05:$63/1968.0,$ 06:$63,1968,0,0,0,0,$ 07:$FC8600-160$ - //cutting 08:$pmcutter.dll$ 09:$254.0,0,0,33,2155872454,7$ 10:$U$ 11:$$ 12:$&100,100,100,^0,0,\0,0,$ 13:$$ 14:$M%ld,0,SO0,$ 15:$5,,,1,31,*1,%ld,$ 16:$$ 17:$0,$ 18:$$ 19:$$ 20:$D%ld,%ld,$ 21:$M%ld,%ld,$ 22:$$ 23:$$ 24:$$ 25:$$ 26:$$ 27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$ 28:$$ 29:$G$ 30:$$ 31:$$ 32:$$ 33:$$ - //engraving - //printing 300:$GraphtecUSB,COM,TCP/IP,LPR,FTP,Fil$ - //custom head = {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}{(2,Step size,)} Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)(2,0,) Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)(2,0,) Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)(2,0,) - //custom end = {(2,Cut Media,)} Cut media = (2,0,F1,1,) - //macro - //comment