aboutsummaryrefslogtreecommitdiff
path: root/vendor/github.com/karalabe/hid/hidapi
diff options
context:
space:
mode:
Diffstat (limited to 'vendor/github.com/karalabe/hid/hidapi')
-rw-r--r--vendor/github.com/karalabe/hid/hidapi/AUTHORS.txt16
-rw-r--r--vendor/github.com/karalabe/hid/hidapi/LICENSE-bsd.txt26
-rw-r--r--vendor/github.com/karalabe/hid/hidapi/LICENSE-gpl3.txt674
-rw-r--r--vendor/github.com/karalabe/hid/hidapi/LICENSE-orig.txt9
-rw-r--r--vendor/github.com/karalabe/hid/hidapi/LICENSE.txt13
-rw-r--r--vendor/github.com/karalabe/hid/hidapi/README.txt339
-rw-r--r--vendor/github.com/karalabe/hid/hidapi/hidapi/hidapi.h391
-rw-r--r--vendor/github.com/karalabe/hid/hidapi/libusb/hid.c1512
-rw-r--r--vendor/github.com/karalabe/hid/hidapi/mac/hid.c1110
-rwxr-xr-xvendor/github.com/karalabe/hid/hidapi/windows/hid.c944
10 files changed, 5034 insertions, 0 deletions
diff --git a/vendor/github.com/karalabe/hid/hidapi/AUTHORS.txt b/vendor/github.com/karalabe/hid/hidapi/AUTHORS.txt
new file mode 100644
index 0000000..7acafd7
--- /dev/null
+++ b/vendor/github.com/karalabe/hid/hidapi/AUTHORS.txt
@@ -0,0 +1,16 @@
+
+HIDAPI Authors:
+
+Alan Ott <alan@signal11.us>:
+ Original Author and Maintainer
+ Linux, Windows, and Mac implementations
+
+Ludovic Rousseau <rousseau@debian.org>:
+ Formatting for Doxygen documentation
+ Bug fixes
+ Correctness fixes
+
+
+For a comprehensive list of contributions, see the commit list at github:
+ http://github.com/signal11/hidapi/commits/master
+
diff --git a/vendor/github.com/karalabe/hid/hidapi/LICENSE-bsd.txt b/vendor/github.com/karalabe/hid/hidapi/LICENSE-bsd.txt
new file mode 100644
index 0000000..538cdf9
--- /dev/null
+++ b/vendor/github.com/karalabe/hid/hidapi/LICENSE-bsd.txt
@@ -0,0 +1,26 @@
+Copyright (c) 2010, Alan Ott, Signal 11 Software
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ * Neither the name of Signal 11 Software nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
diff --git a/vendor/github.com/karalabe/hid/hidapi/LICENSE-gpl3.txt b/vendor/github.com/karalabe/hid/hidapi/LICENSE-gpl3.txt
new file mode 100644
index 0000000..94a9ed0
--- /dev/null
+++ b/vendor/github.com/karalabe/hid/hidapi/LICENSE-gpl3.txt
@@ -0,0 +1,674 @@
+ GNU GENERAL PUBLIC LICENSE
+ Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The GNU General Public License is a free, copyleft license for
+software and other kinds of works.
+
+ The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works. By contrast,
+the GNU General Public License is intended to guarantee your freedom to
+share and change all versions of a program--to make sure it remains free
+software for all its users. We, the Free Software Foundation, use the
+GNU General Public License for most of our software; it applies also to
+any other work released this way by its authors. You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
+
+ To protect your rights, we need to prevent others from denying you
+these rights or asking you to surrender the rights. Therefore, you have
+certain responsibilities if you distribute copies of the software, or if
+you modify it: responsibilities to respect the freedom of others.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must pass on to the recipients the same
+freedoms that you received. You must make sure that they, too, receive
+or can get the source code. And you must show them these terms so they
+know their rights.
+
+ Developers that use the GNU GPL protect your rights with two steps:
+(1) assert copyright on the software, and (2) offer you this License
+giving you legal permission to copy, distribute and/or modify it.
+
+ For the developers' and authors' protection, the GPL clearly explains
+that there is no warranty for this free software. For both users' and
+authors' sake, the GPL requires that modified versions be marked as
+changed, so that their problems will not be attributed erroneously to
+authors of previous versions.
+
+ Some devices are designed to deny users access to install or run
+modified versions of the software inside them, although the manufacturer
+can do so. This is fundamentally incompatible with the aim of
+protecting users' freedom to change the software. The systematic
+pattern of such abuse occurs in the area of products for individuals to
+use, which is precisely where it is most unacceptable. Therefore, we
+have designed this version of the GPL to prohibit the practice for those
+products. If such problems arise substantially in other domains, we
+stand ready to extend this provision to those domains in future versions
+of the GPL, as needed to protect the freedom of users.
+
+ Finally, every program is threatened constantly by software patents.
+States should not allow patents to restrict development and use of
+software on general-purpose computers, but in those that do, we wish to
+avoid the special danger that patents applied to a free program could
+make it effectively proprietary. To prevent this, the GPL assures that
+patents cannot be used to render the program non-free.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ TERMS AND CONDITIONS
+
+ 0. Definitions.
+
+ "This License" refers to version 3 of the GNU General Public License.
+
+ "Copyright" also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
+
+ "The Program" refers to any copyrightable work licensed under this
+License. Each licensee is addressed as "you". "Licensees" and
+"recipients" may be individuals or organizations.
+
+ To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of an
+exact copy. The resulting work is called a "modified version" of the
+earlier work or a work "based on" the earlier work.
+
+ A "covered work" means either the unmodified Program or a work based
+on the Program.
+
+ To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy. Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
+
+ To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies. Mere interaction with a user through
+a computer network, with no transfer of a copy, is not conveying.
+
+ An interactive user interface displays "Appropriate Legal Notices"
+to the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License. If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+ 1. Source Code.
+
+ The "source code" for a work means the preferred form of the work
+for making modifications to it. "Object code" means any non-source
+form of a work.
+
+ A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
+
+ The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form. A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
+
+ The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities. However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work. For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+ The Corresponding Source need not include anything that users
+can regenerate automatically from other parts of the Corresponding
+Source.
+
+ The Corresponding Source for a work in source code form is that
+same work.
+
+ 2. Basic Permissions.
+
+ All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met. This License explicitly affirms your unlimited
+permission to run the unmodified Program. The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work. This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+ You may make, run and propagate covered works that you do not
+convey, without conditions so long as your license otherwise remains
+in force. You may convey covered works to others for the sole purpose
+of having them make modifications exclusively for you, or provide you
+with facilities for running those works, provided that you comply with
+the terms of this License in conveying all material for which you do
+not control copyright. Those thus making or running the covered works
+for you must do so exclusively on your behalf, under your direction
+and control, on terms that prohibit them from making any copies of
+your copyrighted material outside their relationship with you.
+
+ Conveying under any other circumstances is permitted solely under
+the conditions stated below. Sublicensing is not allowed; section 10
+makes it unnecessary.
+
+ 3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+ No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+ When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such circumvention
+is effected by exercising rights under this License with respect to
+the covered work, and you disclaim any intention to limit operation or
+modification of the work as a means of enforcing, against the work's
+users, your or third parties' legal rights to forbid circumvention of
+technological measures.
+
+ 4. Conveying Verbatim Copies.
+
+ You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+ You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+ 5. Conveying Modified Source Versions.
+
+ You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these conditions:
+
+ a) The work must carry prominent notices stating that you modified
+ it, and giving a relevant date.
+
+ b) The work must carry prominent notices stating that it is
+ released under this License and any conditions added under section
+ 7. This requirement modifies the requirement in section 4 to
+ "keep intact all notices".
+
+ c) You must license the entire work, as a whole, under this
+ License to anyone who comes into possession of a copy. This
+ License will therefore apply, along with any applicable section 7
+ additional terms, to the whole of the work, and all its parts,
+ regardless of how they are packaged. This License gives no
+ permission to license the work in any other way, but it does not
+ invalidate such permission if you have separately received it.
+
+ d) If the work has interactive user interfaces, each must display
+ Appropriate Legal Notices; however, if the Program has interactive
+ interfaces that do not display Appropriate Legal Notices, your
+ work need not make them do so.
+
+ A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit. Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+ 6. Conveying Non-Source Forms.
+
+ You may convey a covered work in object code form under the terms
+of sections 4 and 5, provided that you also convey the
+machine-readable Corresponding Source under the terms of this License,
+in one of these ways:
+
+ a) Convey the object code in, or embodied in, a physical product
+ (including a physical distribution medium), accompanied by the
+ Corresponding Source fixed on a durable physical medium
+ customarily used for software interchange.
+
+ b) Convey the object code in, or embodied in, a physical product
+ (including a physical distribution medium), accompanied by a
+ written offer, valid for at least three years and valid for as
+ long as you offer spare parts or customer support for that product
+ model, to give anyone who possesses the object code either (1) a
+ copy of the Corresponding Source for all the software in the
+ product that is covered by this License, on a durable physical
+ medium customarily used for software interchange, for a price no
+ more than your reasonable cost of physically performing this
+ conveying of source, or (2) access to copy the
+ Corresponding Source from a network server at no charge.
+
+ c) Convey individual copies of the object code with a copy of the
+ written offer to provide the Corresponding Source. This
+ alternative is allowed only occasionally and noncommercially, and
+ only if you received the object code with such an offer, in accord
+ with subsection 6b.
+
+ d) Convey the object code by offering access from a designated
+ place (gratis or for a charge), and offer equivalent access to the
+ Corresponding Source in the same way through the same place at no
+ further charge. You need not require recipients to copy the
+ Corresponding Source along with the object code. If the place to
+ copy the object code is a network server, the Corresponding Source
+ may be on a different server (operated by you or a third party)
+ that supports equivalent copying facilities, provided you maintain
+ clear directions next to the object code saying where to find the
+ Corresponding Source. Regardless of what server hosts the
+ Corresponding Source, you remain obligated to ensure that it is
+ available for as long as needed to satisfy these requirements.
+
+ e) Convey the object code using peer-to-peer transmission, provided
+ you inform other peers where the object code and Corresponding
+ Source of the work are being offered to the general public at no
+ charge under subsection 6d.
+
+ A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+ A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal, family,
+or household purposes, or (2) anything designed or sold for incorporation
+into a dwelling. In determining whether a product is a consumer product,
+doubtful cases shall be resolved in favor of coverage. For a particular
+product received by a particular user, "normally used" refers to a
+typical or common use of that class of product, regardless of the status
+of the particular user or of the way in which the particular user
+actually uses, or expects or is expected to use, the product. A product
+is a consumer product regardless of whether the product has substantial
+commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+ "Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to install
+and execute modified versions of a covered work in that User Product from
+a modified version of its Corresponding Source. The information must
+suffice to ensure that the continued functioning of the modified object
+code is in no case prevented or interfered with solely because
+modification has been made.
+
+ If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information. But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+ The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or updates
+for a work that has been modified or installed by the recipient, or for
+the User Product in which it has been modified or installed. Access to a
+network may be denied when the modification itself materially and
+adversely affects the operation of the network or violates the rules and
+protocols for communication across the network.
+
+ Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+ 7. Additional Terms.
+
+ "Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law. If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+ When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it. (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.) You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+ Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders of
+that material) supplement the terms of this License with terms:
+
+ a) Disclaiming warranty or limiting liability differently from the
+ terms of sections 15 and 16 of this License; or
+
+ b) Requiring preservation of specified reasonable legal notices or
+ author attributions in that material or in the Appropriate Legal
+ Notices displayed by works containing it; or
+
+ c) Prohibiting misrepresentation of the origin of that material, or
+ requiring that modified versions of such material be marked in
+ reasonable ways as different from the original version; or
+
+ d) Limiting the use for publicity purposes of names of licensors or
+ authors of the material; or
+
+ e) Declining to grant rights under trademark law for use of some
+ trade names, trademarks, or service marks; or
+
+ f) Requiring indemnification of licensors and authors of that
+ material by anyone who conveys the material (or modified versions of
+ it) with contractual assumptions of liability to the recipient, for
+ any liability that these contractual assumptions directly impose on
+ those licensors and authors.
+
+ All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10. If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term. If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+ If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+ Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions;
+the above requirements apply either way.
+
+ 8. Termination.
+
+ You may not propagate or modify a covered work except as expressly
+provided under this License. Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+ However, if you cease all violation of this License, then your
+license from a particular copyright holder is reinstated (a)
+provisionally, unless and until the copyright holder explicitly and
+finally terminates your license, and (b) permanently, if the copyright
+holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+ Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+ Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License. If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+ 9. Acceptance Not Required for Having Copies.
+
+ You are not required to accept this License in order to receive or
+run a copy of the Program. Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance. However,
+nothing other than this License grants you permission to propagate or
+modify any covered work. These actions infringe copyright if you do
+not accept this License. Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+ 10. Automatic Licensing of Downstream Recipients.
+
+ Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License. You are not responsible
+for enforcing compliance by third parties with this License.
+
+ An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations. If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+ You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License. For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+ 11. Patents.
+
+ A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based. The
+work thus licensed is called the contributor's "contributor version".
+
+ A contributor's "essential patent claims" are all patent claims
+owned or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version. For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
+this License.
+
+ Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+ In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement). To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+ If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients. "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+ If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+ A patent license is "discriminatory" if it does not include within
+the scope of its coverage, prohibits the exercise of, or is
+conditioned on the non-exercise of one or more of the rights that are
+specifically granted under this License. You may not convey a covered
+work if you are a party to an arrangement with a third party that is
+in the business of distributing software, under which you make payment
+to the third party based on the extent of your activity of conveying
+the work, and under which the third party grants, to any of the
+parties who would receive the covered work from you, a discriminatory
+patent license (a) in connection with copies of the covered work
+conveyed by you (or copies made from those copies), or (b) primarily
+for and in connection with specific products or compilations that
+contain the covered work, unless you entered into that arrangement,
+or that patent license was granted, prior to 28 March 2007.
+
+ Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+ 12. No Surrender of Others' Freedom.
+
+ If conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you may
+not convey it at all. For example, if you agree to terms that obligate you
+to collect a royalty for further conveying from those to whom you convey
+the Program, the only way you could satisfy both those terms and this
+License would be to refrain entirely from conveying the Program.
+
+ 13. Use with the GNU Affero General Public License.
+
+ Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU Affero General Public License into a single
+combined work, and to convey the resulting work. The terms of this
+License will continue to apply to the part which is the covered work,
+but the special requirements of the GNU Affero General Public License,
+section 13, concerning interaction through a network will apply to the
+combination as such.
+
+ 14. Revised Versions of this License.
+
+ The Free Software Foundation may publish revised and/or new versions of
+the GNU General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+ Each version is given a distinguishing version number. If the
+Program specifies that a certain numbered version of the GNU General
+Public License "or any later version" applies to it, you have the
+option of following the terms and conditions either of that numbered
+version or of any later version published by the Free Software
+Foundation. If the Program does not specify a version number of the
+GNU General Public License, you may choose any version ever published
+by the Free Software Foundation.
+
+ If the Program specifies that a proxy can decide which future
+versions of the GNU General Public License can be used, that proxy's
+public statement of acceptance of a version permanently authorizes you
+to choose that version for the Program.
+
+ Later license versions may give you additional or different
+permissions. However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
+
+ 15. Disclaimer of Warranty.
+
+ THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+ 16. Limitation of Liability.
+
+ IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
+THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
+USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
+PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
+EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.
+
+ 17. Interpretation of Sections 15 and 16.
+
+ If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+state the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+Also add information on how to contact you by electronic and paper mail.
+
+ If the program does terminal interaction, make it output a short
+notice like this when it starts in an interactive mode:
+
+ <program> Copyright (C) <year> <name of author>
+ This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, your program's commands
+might be different; for a GUI interface, you would use an "about box".
+
+ You should also get your employer (if you work as a programmer) or school,
+if any, to sign a "copyright disclaimer" for the program, if necessary.
+For more information on this, and how to apply and follow the GNU GPL, see
+<http://www.gnu.org/licenses/>.
+
+ The GNU General Public License does not permit incorporating your program
+into proprietary programs. If your program is a subroutine library, you
+may consider it more useful to permit linking proprietary applications with
+the library. If this is what you want to do, use the GNU Lesser General
+Public License instead of this License. But first, please read
+<http://www.gnu.org/philosophy/why-not-lgpl.html>.
diff --git a/vendor/github.com/karalabe/hid/hidapi/LICENSE-orig.txt b/vendor/github.com/karalabe/hid/hidapi/LICENSE-orig.txt
new file mode 100644
index 0000000..e3f3380
--- /dev/null
+++ b/vendor/github.com/karalabe/hid/hidapi/LICENSE-orig.txt
@@ -0,0 +1,9 @@
+ HIDAPI - Multi-Platform library for
+ communication with HID devices.
+
+ Copyright 2009, Alan Ott, Signal 11 Software.
+ All Rights Reserved.
+
+ This software may be used by anyone for any reason so
+ long as the copyright notice in the source files
+ remains intact.
diff --git a/vendor/github.com/karalabe/hid/hidapi/LICENSE.txt b/vendor/github.com/karalabe/hid/hidapi/LICENSE.txt
new file mode 100644
index 0000000..e1676d4
--- /dev/null
+++ b/vendor/github.com/karalabe/hid/hidapi/LICENSE.txt
@@ -0,0 +1,13 @@
+HIDAPI can be used under one of three licenses.
+
+1. The GNU General Public License, version 3.0, in LICENSE-gpl3.txt
+2. A BSD-Style License, in LICENSE-bsd.txt.
+3. The more liberal original HIDAPI license. LICENSE-orig.txt
+
+The license chosen is at the discretion of the user of HIDAPI. For example:
+1. An author of GPL software would likely use HIDAPI under the terms of the
+GPL.
+
+2. An author of commercial closed-source software would likely use HIDAPI
+under the terms of the BSD-style license or the original HIDAPI license.
+
diff --git a/vendor/github.com/karalabe/hid/hidapi/README.txt b/vendor/github.com/karalabe/hid/hidapi/README.txt
new file mode 100644
index 0000000..f19dae4
--- /dev/null
+++ b/vendor/github.com/karalabe/hid/hidapi/README.txt
@@ -0,0 +1,339 @@
+ HIDAPI library for Windows, Linux, FreeBSD and Mac OS X
+ =========================================================
+
+About
+======
+
+HIDAPI is a multi-platform library which allows an application to interface
+with USB and Bluetooth HID-Class devices on Windows, Linux, FreeBSD, and Mac
+OS X. HIDAPI can be either built as a shared library (.so or .dll) or
+can be embedded directly into a target application by adding a single source
+file (per platform) and a single header.
+
+HIDAPI has four back-ends:
+ * Windows (using hid.dll)
+ * Linux/hidraw (using the Kernel's hidraw driver)
+ * Linux/libusb (using libusb-1.0)
+ * FreeBSD (using libusb-1.0)
+ * Mac (using IOHidManager)
+
+On Linux, either the hidraw or the libusb back-end can be used. There are
+tradeoffs, and the functionality supported is slightly different.
+
+Linux/hidraw (linux/hid.c):
+This back-end uses the hidraw interface in the Linux kernel. While this
+back-end will support both USB and Bluetooth, it has some limitations on
+kernels prior to 2.6.39, including the inability to send or receive feature
+reports. In addition, it will only communicate with devices which have
+hidraw nodes associated with them. Keyboards, mice, and some other devices
+which are blacklisted from having hidraw nodes will not work. Fortunately,
+for nearly all the uses of hidraw, this is not a problem.
+
+Linux/FreeBSD/libusb (libusb/hid.c):
+This back-end uses libusb-1.0 to communicate directly to a USB device. This
+back-end will of course not work with Bluetooth devices.
+
+HIDAPI also comes with a Test GUI. The Test GUI is cross-platform and uses
+Fox Toolkit (http://www.fox-toolkit.org). It will build on every platform
+which HIDAPI supports. Since it relies on a 3rd party library, building it
+is optional but recommended because it is so useful when debugging hardware.
+
+What Does the API Look Like?
+=============================
+The API provides the the most commonly used HID functions including sending
+and receiving of input, output, and feature reports. The sample program,
+which communicates with a heavily hacked up version of the Microchip USB
+Generic HID sample looks like this (with error checking removed for
+simplicity):
+
+#ifdef WIN32
+#include <windows.h>
+#endif
+#include <stdio.h>
+#include <stdlib.h>
+#include "hidapi.h"
+
+#define MAX_STR 255
+
+int main(int argc, char* argv[])
+{
+ int res;
+ unsigned char buf[65];
+ wchar_t wstr[MAX_STR];
+ hid_device *handle;
+ int i;
+
+ // Initialize the hidapi library
+ res = hid_init();
+
+ // Open the device using the VID, PID,
+ // and optionally the Serial number.
+ handle = hid_open(0x4d8, 0x3f, NULL);
+
+ // Read the Manufacturer String
+ res = hid_get_manufacturer_string(handle, wstr, MAX_STR);
+ wprintf(L"Manufacturer String: %s\n", wstr);
+
+ // Read the Product String
+ res = hid_get_product_string(handle, wstr, MAX_STR);
+ wprintf(L"Product String: %s\n", wstr);
+
+ // Read the Serial Number String
+ res = hid_get_serial_number_string(handle, wstr, MAX_STR);
+ wprintf(L"Serial Number String: (%d) %s\n", wstr[0], wstr);
+
+ // Read Indexed String 1
+ res = hid_get_indexed_string(handle, 1, wstr, MAX_STR);
+ wprintf(L"Indexed String 1: %s\n", wstr);
+
+ // Toggle LED (cmd 0x80). The first byte is the report number (0x0).
+ buf[0] = 0x0;
+ buf[1] = 0x80;
+ res = hid_write(handle, buf, 65);
+
+ // Request state (cmd 0x81). The first byte is the report number (0x0).
+ buf[0] = 0x0;
+ buf[1] = 0x81;
+ res = hid_write(handle, buf, 65);
+
+ // Read requested state
+ res = hid_read(handle, buf, 65);
+
+ // Print out the returned buffer.
+ for (i = 0; i < 4; i++)
+ printf("buf[%d]: %d\n", i, buf[i]);
+
+ // Finalize the hidapi library
+ res = hid_exit();
+
+ return 0;
+}
+
+If you have your own simple test programs which communicate with standard
+hardware development boards (such as those from Microchip, TI, Atmel,
+FreeScale and others), please consider sending me something like the above
+for inclusion into the HIDAPI source. This will help others who have the
+same hardware as you do.
+
+License
+========
+HIDAPI may be used by one of three licenses as outlined in LICENSE.txt.
+
+Download
+=========
+HIDAPI can be downloaded from github
+ git clone git://github.com/signal11/hidapi.git
+
+Build Instructions
+===================
+
+This section is long. Don't be put off by this. It's not long because it's
+complicated to build HIDAPI; it's quite the opposite. This section is long
+because of the flexibility of HIDAPI and the large number of ways in which
+it can be built and used. You will likely pick a single build method.
+
+HIDAPI can be built in several different ways. If you elect to build a
+shared library, you will need to build it from the HIDAPI source
+distribution. If you choose instead to embed HIDAPI directly into your
+application, you can skip the building and look at the provided platform
+Makefiles for guidance. These platform Makefiles are located in linux/
+libusb/ mac/ and windows/ and are called Makefile-manual. In addition,
+Visual Studio projects are provided. Even if you're going to embed HIDAPI
+into your project, it is still beneficial to build the example programs.
+
+
+Prerequisites:
+---------------
+
+ Linux:
+ -------
+ On Linux, you will need to install development packages for libudev,
+ libusb and optionally Fox-toolkit (for the test GUI). On
+ Debian/Ubuntu systems these can be installed by running:
+ sudo apt-get install libudev-dev libusb-1.0-0-dev libfox-1.6-dev
+
+ If you downloaded the source directly from the git repository (using
+ git clone), you'll need Autotools:
+ sudo apt-get install autotools-dev autoconf automake libtool
+
+ FreeBSD:
+ ---------
+ On FreeBSD you will need to install GNU make, libiconv, and
+ optionally Fox-Toolkit (for the test GUI). This is done by running
+ the following:
+ pkg_add -r gmake libiconv fox16
+
+ If you downloaded the source directly from the git repository (using
+ git clone), you'll need Autotools:
+ pkg_add -r autotools
+
+ Mac:
+ -----
+ On Mac, you will need to install Fox-Toolkit if you wish to build
+ the Test GUI. There are two ways to do this, and each has a slight
+ complication. Which method you use depends on your use case.
+
+ If you wish to build the Test GUI just for your own testing on your
+ own computer, then the easiest method is to install Fox-Toolkit
+ using ports:
+ sudo port install fox
+
+ If you wish to build the TestGUI app bundle to redistribute to
+ others, you will need to install Fox-toolkit from source. This is
+ because the version of fox that gets installed using ports uses the
+ ports X11 libraries which are not compatible with the Apple X11
+ libraries. If you install Fox with ports and then try to distribute
+ your built app bundle, it will simply fail to run on other systems.
+ To install Fox-Toolkit manually, download the source package from
+ http://www.fox-toolkit.org, extract it, and run the following from
+ within the extracted source:
+ ./configure && make && make install
+
+ Windows:
+ ---------
+ On Windows, if you want to build the test GUI, you will need to get
+ the hidapi-externals.zip package from the download site. This
+ contains pre-built binaries for Fox-toolkit. Extract
+ hidapi-externals.zip just outside of hidapi, so that
+ hidapi-externals and hidapi are on the same level, as shown:
+
+ Parent_Folder
+ |
+ +hidapi
+ +hidapi-externals
+
+ Again, this step is not required if you do not wish to build the
+ test GUI.
+
+
+Building HIDAPI into a shared library on Unix Platforms:
+---------------------------------------------------------
+
+On Unix-like systems such as Linux, FreeBSD, Mac, and even Windows, using
+Mingw or Cygwin, the easiest way to build a standard system-installed shared
+library is to use the GNU Autotools build system. If you checked out the
+source from the git repository, run the following:
+
+ ./bootstrap
+ ./configure
+ make
+ make install <----- as root, or using sudo
+
+If you downloaded a source package (ie: if you did not run git clone), you
+can skip the ./bootstrap step.
+
+./configure can take several arguments which control the build. The two most
+likely to be used are:
+ --enable-testgui
+ Enable build of the Test GUI. This requires Fox toolkit to
+ be installed. Instructions for installing Fox-Toolkit on
+ each platform are in the Prerequisites section above.
+
+ --prefix=/usr
+ Specify where you want the output headers and libraries to
+ be installed. The example above will put the headers in
+ /usr/include and the binaries in /usr/lib. The default is to
+ install into /usr/local which is fine on most systems.
+
+Building the manual way on Unix platforms:
+-------------------------------------------
+
+Manual Makefiles are provided mostly to give the user and idea what it takes
+to build a program which embeds HIDAPI directly inside of it. These should
+really be used as examples only. If you want to build a system-wide shared
+library, use the Autotools method described above.
+
+ To build HIDAPI using the manual makefiles, change to the directory
+ of your platform and run make. For example, on Linux run:
+ cd linux/
+ make -f Makefile-manual
+
+ To build the Test GUI using the manual makefiles:
+ cd testgui/
+ make -f Makefile-manual
+
+Building on Windows:
+---------------------
+
+To build the HIDAPI DLL on Windows using Visual Studio, build the .sln file
+in the windows/ directory.
+
+To build the Test GUI on windows using Visual Studio, build the .sln file in
+the testgui/ directory.
+
+To build HIDAPI using MinGW or Cygwin using Autotools, use the instructions
+in the section titled "Building HIDAPI into a shared library on Unix
+Platforms" above. Note that building the Test GUI with MinGW or Cygwin will
+require the Windows procedure in the Prerequisites section above (ie:
+hidapi-externals.zip).
+
+To build HIDAPI using MinGW using the Manual Makefiles, see the section
+"Building the manual way on Unix platforms" above.
+
+HIDAPI can also be built using the Windows DDK (now also called the Windows
+Driver Kit or WDK). This method was originally required for the HIDAPI build
+but not anymore. However, some users still prefer this method. It is not as
+well supported anymore but should still work. Patches are welcome if it does
+not. To build using the DDK:
+
+ 1. Install the Windows Driver Kit (WDK) from Microsoft.
+ 2. From the Start menu, in the Windows Driver Kits folder, select Build
+ Environments, then your operating system, then the x86 Free Build
+ Environment (or one that is appropriate for your system).
+ 3. From the console, change directory to the windows/ddk_build/ directory,
+ which is part of the HIDAPI distribution.
+ 4. Type build.
+ 5. You can find the output files (DLL and LIB) in a subdirectory created
+ by the build system which is appropriate for your environment. On
+ Windows XP, this directory is objfre_wxp_x86/i386.
+
+Cross Compiling
+================
+
+This section talks about cross compiling HIDAPI for Linux using autotools.
+This is useful for using HIDAPI on embedded Linux targets. These
+instructions assume the most raw kind of embedded Linux build, where all
+prerequisites will need to be built first. This process will of course vary
+based on your embedded Linux build system if you are using one, such as
+OpenEmbedded or Buildroot.
+
+For the purpose of this section, it will be assumed that the following
+environment variables are exported.
+
+ $ export STAGING=$HOME/out
+ $ export HOST=arm-linux
+
+STAGING and HOST can be modified to suit your setup.
+
+Prerequisites
+--------------
+
+Note that the build of libudev is the very basic configuration.
+
+Build Libusb. From the libusb source directory, run:
+ ./configure --host=$HOST --prefix=$STAGING
+ make
+ make install
+
+Build libudev. From the libudev source directory, run:
+ ./configure --disable-gudev --disable-introspection --disable-hwdb \
+ --host=$HOST --prefix=$STAGING
+ make
+ make install
+
+Building HIDAPI
+----------------
+
+Build HIDAPI:
+
+ PKG_CONFIG_DIR= \
+ PKG_CONFIG_LIBDIR=$STAGING/lib/pkgconfig:$STAGING/share/pkgconfig \
+ PKG_CONFIG_SYSROOT_DIR=$STAGING \
+ ./configure --host=$HOST --prefix=$STAGING
+
+
+Signal 11 Software - 2010-04-11
+ 2010-07-28
+ 2011-09-10
+ 2012-05-01
+ 2012-07-03
diff --git a/vendor/github.com/karalabe/hid/hidapi/hidapi/hidapi.h b/vendor/github.com/karalabe/hid/hidapi/hidapi/hidapi.h
new file mode 100644
index 0000000..e5bc2dc
--- /dev/null
+++ b/vendor/github.com/karalabe/hid/hidapi/hidapi/hidapi.h
@@ -0,0 +1,391 @@
+/*******************************************************
+ HIDAPI - Multi-Platform library for
+ communication with HID devices.
+
+ Alan Ott
+ Signal 11 Software
+
+ 8/22/2009
+
+ Copyright 2009, All Rights Reserved.
+
+ At the discretion of the user of this library,
+ this software may be licensed under the terms of the
+ GNU General Public License v3, a BSD-Style license, or the
+ original HIDAPI license as outlined in the LICENSE.txt,
+ LICENSE-gpl3.txt, LICENSE-bsd.txt, and LICENSE-orig.txt
+ files located at the root of the source distribution.
+ These files may also be found in the public source
+ code repository located at:
+ http://github.com/signal11/hidapi .
+********************************************************/
+
+/** @file
+ * @defgroup API hidapi API
+ */
+
+#ifndef HIDAPI_H__
+#define HIDAPI_H__
+
+#include <wchar.h>
+
+#ifdef _WIN32
+ #define HID_API_EXPORT __declspec(dllexport)
+ #define HID_API_CALL
+#else
+ #define HID_API_EXPORT /**< API export macro */
+ #define HID_API_CALL /**< API call macro */
+#endif
+
+#define HID_API_EXPORT_CALL HID_API_EXPORT HID_API_CALL /**< API export and call macro*/
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ struct hid_device_;
+ typedef struct hid_device_ hid_device; /**< opaque hidapi structure */
+
+ /** hidapi info structure */
+ struct hid_device_info {
+ /** Platform-specific device path */
+ char *path;
+ /** Device Vendor ID */
+ unsigned short vendor_id;
+ /** Device Product ID */
+ unsigned short product_id;
+ /** Serial Number */
+ wchar_t *serial_number;
+ /** Device Release Number in binary-coded decimal,
+ also known as Device Version Number */
+ unsigned short release_number;
+ /** Manufacturer String */
+ wchar_t *manufacturer_string;
+ /** Product string */
+ wchar_t *product_string;
+ /** Usage Page for this Device/Interface
+ (Windows/Mac only). */
+ unsigned short usage_page;
+ /** Usage for this Device/Interface
+ (Windows/Mac only).*/
+ unsigned short usage;
+ /** The USB interface which this logical device
+ represents. Valid on both Linux implementations
+ in all cases, and valid on the Windows implementation
+ only if the device contains more than one interface. */
+ int interface_number;
+
+ /** Pointer to the next device */
+ struct hid_device_info *next;
+ };
+
+
+ /** @brief Initialize the HIDAPI library.
+
+ This function initializes the HIDAPI library. Calling it is not
+ strictly necessary, as it will be called automatically by
+ hid_enumerate() and any of the hid_open_*() functions if it is
+ needed. This function should be called at the beginning of
+ execution however, if there is a chance of HIDAPI handles
+ being opened by different threads simultaneously.
+
+ @ingroup API
+
+ @returns
+ This function returns 0 on success and -1 on error.
+ */
+ int HID_API_EXPORT HID_API_CALL hid_init(void);
+
+ /** @brief Finalize the HIDAPI library.
+
+ This function frees all of the static data associated with
+ HIDAPI. It should be called at the end of execution to avoid
+ memory leaks.
+
+ @ingroup API
+
+ @returns
+ This function returns 0 on success and -1 on error.
+ */
+ int HID_API_EXPORT HID_API_CALL hid_exit(void);
+
+ /** @brief Enumerate the HID Devices.
+
+ This function returns a linked list of all the HID devices
+ attached to the system which match vendor_id and product_id.
+ If @p vendor_id is set to 0 then any vendor matches.
+ If @p product_id is set to 0 then any product matches.
+ If @p vendor_id and @p product_id are both set to 0, then
+ all HID devices will be returned.
+
+ @ingroup API
+ @param vendor_id The Vendor ID (VID) of the types of device
+ to open.
+ @param product_id The Product ID (PID) of the types of
+ device to open.
+
+ @returns
+ This function returns a pointer to a linked list of type
+ struct #hid_device, containing information about the HID devices
+ attached to the system, or NULL in the case of failure. Free
+ this linked list by calling hid_free_enumeration().
+ */
+ struct hid_device_info HID_API_EXPORT * HID_API_CALL hid_enumerate(unsigned short vendor_id, unsigned short product_id);
+
+ /** @brief Free an enumeration Linked List
+
+ This function frees a linked list created by hid_enumerate().
+
+ @ingroup API
+ @param devs Pointer to a list of struct_device returned from
+ hid_enumerate().
+ */
+ void HID_API_EXPORT HID_API_CALL hid_free_enumeration(struct hid_device_info *devs);
+
+ /** @brief Open a HID device using a Vendor ID (VID), Product ID
+ (PID) and optionally a serial number.
+
+ If @p serial_number is NULL, the first device with the
+ specified VID and PID is opened.
+
+ @ingroup API
+ @param vendor_id The Vendor ID (VID) of the device to open.
+ @param product_id The Product ID (PID) of the device to open.
+ @param serial_number The Serial Number of the device to open
+ (Optionally NULL).
+
+ @returns
+ This function returns a pointer to a #hid_device object on
+ success or NULL on failure.
+ */
+ HID_API_EXPORT hid_device * HID_API_CALL hid_open(unsigned short vendor_id, unsigned short product_id, const wchar_t *serial_number);
+
+ /** @brief Open a HID device by its path name.
+
+ The path name be determined by calling hid_enumerate(), or a
+ platform-specific path name can be used (eg: /dev/hidraw0 on
+ Linux).
+
+ @ingroup API
+ @param path The path name of the device to open
+
+ @returns
+ This function returns a pointer to a #hid_device object on
+ success or NULL on failure.
+ */
+ HID_API_EXPORT hid_device * HID_API_CALL hid_open_path(const char *path);
+
+ /** @brief Write an Output report to a HID device.
+
+ The first byte of @p data[] must contain the Report ID. For
+ devices which only support a single report, this must be set
+ to 0x0. The remaining bytes contain the report data. Since
+ the Report ID is mandatory, calls to hid_write() will always
+ contain one more byte than the report contains. For example,
+ if a hid report is 16 bytes long, 17 bytes must be passed to
+ hid_write(), the Report ID (or 0x0, for devices with a
+ single report), followed by the report data (16 bytes). In
+ this example, the length passed in would be 17.
+
+ hid_write() will send the data on the first OUT endpoint, if
+ one exists. If it does not, it will send the data through
+ the Control Endpoint (Endpoint 0).
+
+ @ingroup API
+ @param device A device handle returned from hid_open().
+ @param data The data to send, including the report number as
+ the first byte.
+ @param length The length in bytes of the data to send.
+
+ @returns
+ This function returns the actual number of bytes written and
+ -1 on error.
+ */
+ int HID_API_EXPORT HID_API_CALL hid_write(hid_device *device, const unsigned char *data, size_t length);
+
+ /** @brief Read an Input report from a HID device with timeout.
+
+ Input reports are returned
+ to the host through the INTERRUPT IN endpoint. The first byte will
+ contain the Report number if the device uses numbered reports.
+
+ @ingroup API
+ @param device A device handle returned from hid_open().
+ @param data A buffer to put the read data into.
+ @param length The number of bytes to read. For devices with
+ multiple reports, make sure to read an extra byte for
+ the report number.
+ @param milliseconds timeout in milliseconds or -1 for blocking wait.
+
+ @returns
+ This function returns the actual number of bytes read and
+ -1 on error. If no packet was available to be read within
+ the timeout period, this function returns 0.
+ */
+ int HID_API_EXPORT HID_API_CALL hid_read_timeout(hid_device *dev, unsigned char *data, size_t length, int milliseconds);
+
+ /** @brief Read an Input report from a HID device.
+
+ Input reports are returned
+ to the host through the INTERRUPT IN endpoint. The first byte will
+ contain the Report number if the device uses numbered reports.
+
+ @ingroup API
+ @param device A device handle returned from hid_open().
+ @param data A buffer to put the read data into.
+ @param length The number of bytes to read. For devices with
+ multiple reports, make sure to read an extra byte for
+ the report number.
+
+ @returns
+ This function returns the actual number of bytes read and
+ -1 on error. If no packet was available to be read and
+ the handle is in non-blocking mode, this function returns 0.
+ */
+ int HID_API_EXPORT HID_API_CALL hid_read(hid_device *device, unsigned char *data, size_t length);
+
+ /** @brief Set the device handle to be non-blocking.
+
+ In non-blocking mode calls to hid_read() will return
+ immediately with a value of 0 if there is no data to be
+ read. In blocking mode, hid_read() will wait (block) until
+ there is data to read before returning.
+
+ Nonblocking can be turned on and off at any time.
+
+ @ingroup API
+ @param device A device handle returned from hid_open().
+ @param nonblock enable or not the nonblocking reads
+ - 1 to enable nonblocking
+ - 0 to disable nonblocking.
+
+ @returns
+ This function returns 0 on success and -1 on error.
+ */
+ int HID_API_EXPORT HID_API_CALL hid_set_nonblocking(hid_device *device, int nonblock);
+
+ /** @brief Send a Feature report to the device.
+
+ Feature reports are sent over the Control endpoint as a
+ Set_Report transfer. The first byte of @p data[] must
+ contain the Report ID. For devices which only support a
+ single report, this must be set to 0x0. The remaining bytes
+ contain the report data. Since the Report ID is mandatory,
+ calls to hid_send_feature_report() will always contain one
+ more byte than the report contains. For example, if a hid
+ report is 16 bytes long, 17 bytes must be passed to
+ hid_send_feature_report(): the Report ID (or 0x0, for
+ devices which do not use numbered reports), followed by the
+ report data (16 bytes). In this example, the length passed
+ in would be 17.
+
+ @ingroup API
+ @param device A device handle returned from hid_open().
+ @param data The data to send, including the report number as
+ the first byte.
+ @param length The length in bytes of the data to send, including
+ the report number.
+
+ @returns
+ This function returns the actual number of bytes written and
+ -1 on error.
+ */
+ int HID_API_EXPORT HID_API_CALL hid_send_feature_report(hid_device *device, const unsigned char *data, size_t length);
+
+ /** @brief Get a feature report from a HID device.
+
+ Set the first byte of @p data[] to the Report ID of the
+ report to be read. Make sure to allow space for this
+ extra byte in @p data[]. Upon return, the first byte will
+ still contain the Report ID, and the report data will
+ start in data[1].
+
+ @ingroup API
+ @param device A device handle returned from hid_open().
+ @param data A buffer to put the read data into, including
+ the Report ID. Set the first byte of @p data[] to the
+ Report ID of the report to be read, or set it to zero
+ if your device does not use numbered reports.
+ @param length The number of bytes to read, including an
+ extra byte for the report ID. The buffer can be longer
+ than the actual report.
+
+ @returns
+ This function returns the number of bytes read plus
+ one for the report ID (which is still in the first
+ byte), or -1 on error.
+ */
+ int HID_API_EXPORT HID_API_CALL hid_get_feature_report(hid_device *device, unsigned char *data, size_t length);
+
+ /** @brief Close a HID device.
+
+ @ingroup API
+ @param device A device handle returned from hid_open().
+ */
+ void HID_API_EXPORT HID_API_CALL hid_close(hid_device *device);
+
+ /** @brief Get The Manufacturer String from a HID device.
+
+ @ingroup API
+ @param device A device handle returned from hid_open().
+ @param string A wide string buffer to put the data into.
+ @param maxlen The length of the buffer in multiples of wchar_t.
+
+ @returns
+ This function returns 0 on success and -1 on error.
+ */
+ int HID_API_EXPORT_CALL hid_get_manufacturer_string(hid_device *device, wchar_t *string, size_t maxlen);
+
+ /** @brief Get The Product String from a HID device.
+
+ @ingroup API
+ @param device A device handle returned from hid_open().
+ @param string A wide string buffer to put the data into.
+ @param maxlen The length of the buffer in multiples of wchar_t.
+
+ @returns
+ This function returns 0 on success and -1 on error.
+ */
+ int HID_API_EXPORT_CALL hid_get_product_string(hid_device *device, wchar_t *string, size_t maxlen);
+
+ /** @brief Get The Serial Number String from a HID device.
+
+ @ingroup API
+ @param device A device handle returned from hid_open().
+ @param string A wide string buffer to put the data into.
+ @param maxlen The length of the buffer in multiples of wchar_t.
+
+ @returns
+ This function returns 0 on success and -1 on error.
+ */
+ int HID_API_EXPORT_CALL hid_get_serial_number_string(hid_device *device, wchar_t *string, size_t maxlen);
+
+ /** @brief Get a string from a HID device, based on its string index.
+
+ @ingroup API
+ @param device A device handle returned from hid_open().
+ @param string_index The index of the string to get.
+ @param string A wide string buffer to put the data into.
+ @param maxlen The length of the buffer in multiples of wchar_t.
+
+ @returns
+ This function returns 0 on success and -1 on error.
+ */
+ int HID_API_EXPORT_CALL hid_get_indexed_string(hid_device *device, int string_index, wchar_t *string, size_t maxlen);
+
+ /** @brief Get a string describing the last error which occurred.
+
+ @ingroup API
+ @param device A device handle returned from hid_open().
+
+ @returns
+ This function returns a string containing the last error
+ which occurred or NULL if none has occurred.
+ */
+ HID_API_EXPORT const wchar_t* HID_API_CALL hid_error(hid_device *device);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
diff --git a/vendor/github.com/karalabe/hid/hidapi/libusb/hid.c b/vendor/github.com/karalabe/hid/hidapi/libusb/hid.c
new file mode 100644
index 0000000..474dff4
--- /dev/null
+++ b/vendor/github.com/karalabe/hid/hidapi/libusb/hid.c
@@ -0,0 +1,1512 @@
+/*******************************************************
+ HIDAPI - Multi-Platform library for
+ communication with HID devices.
+
+ Alan Ott
+ Signal 11 Software
+
+ 8/22/2009
+ Linux Version - 6/2/2010
+ Libusb Version - 8/13/2010
+ FreeBSD Version - 11/1/2011
+
+ Copyright 2009, All Rights Reserved.
+
+ At the discretion of the user of this library,
+ this software may be licensed under the terms of the
+ GNU General Public License v3, a BSD-Style license, or the
+ original HIDAPI license as outlined in the LICENSE.txt,
+ LICENSE-gpl3.txt, LICENSE-bsd.txt, and LICENSE-orig.txt
+ files located at the root of the source distribution.
+ These files may also be found in the public source
+ code repository located at:
+ http://github.com/signal11/hidapi .
+********************************************************/
+
+/* C */
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include <ctype.h>
+#include <locale.h>
+#include <errno.h>
+
+/* Unix */
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/ioctl.h>
+#include <sys/utsname.h>
+#include <fcntl.h>
+#include <pthread.h>
+#include <wchar.h>
+
+/* GNU / LibUSB */
+#include <libusb.h>
+#ifndef __ANDROID__
+#include <iconv.h>
+#endif
+
+#include "hidapi.h"
+
+#ifdef __ANDROID__
+
+/* Barrier implementation because Android/Bionic don't have pthread_barrier.
+ This implementation came from Brent Priddy and was posted on
+ StackOverflow. It is used with his permission. */
+typedef int pthread_barrierattr_t;
+typedef struct pthread_barrier {
+ pthread_mutex_t mutex;
+ pthread_cond_t cond;
+ int count;
+ int trip_count;
+} pthread_barrier_t;
+
+static int pthread_barrier_init(pthread_barrier_t *barrier, const pthread_barrierattr_t *attr, unsigned int count)
+{
+ if(count == 0) {
+ errno = EINVAL;
+ return -1;
+ }
+
+ if(pthread_mutex_init(&barrier->mutex, 0) < 0) {
+ return -1;
+ }
+ if(pthread_cond_init(&barrier->cond, 0) < 0) {
+ pthread_mutex_destroy(&barrier->mutex);
+ return -1;
+ }
+ barrier->trip_count = count;
+ barrier->count = 0;
+
+ return 0;
+}
+
+static int pthread_barrier_destroy(pthread_barrier_t *barrier)
+{
+ pthread_cond_destroy(&barrier->cond);
+ pthread_mutex_destroy(&barrier->mutex);
+ return 0;
+}
+
+static int pthread_barrier_wait(pthread_barrier_t *barrier)
+{
+ pthread_mutex_lock(&barrier->mutex);
+ ++(barrier->count);
+ if(barrier->count >= barrier->trip_count)
+ {
+ barrier->count = 0;
+ pthread_cond_broadcast(&barrier->cond);
+ pthread_mutex_unlock(&barrier->mutex);
+ return 1;
+ }
+ else
+ {
+ pthread_cond_wait(&barrier->cond, &(barrier->mutex));
+ pthread_mutex_unlock(&barrier->mutex);
+ return 0;
+ }
+}
+
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef DEBUG_PRINTF
+#define LOG(...) fprintf(stderr, __VA_ARGS__)
+#else
+#define LOG(...) do {} while (0)
+#endif
+
+#ifndef __FreeBSD__
+#define DETACH_KERNEL_DRIVER
+#endif
+
+/* Uncomment to enable the retrieval of Usage and Usage Page in
+hid_enumerate(). Warning, on platforms different from FreeBSD
+this is very invasive as it requires the detach
+and re-attach of the kernel driver. See comments inside hid_enumerate().
+libusb HIDAPI programs are encouraged to use the interface number
+instead to differentiate between interfaces on a composite HID device. */
+/*#define INVASIVE_GET_USAGE*/
+
+/* Linked List of input reports received from the device. */
+struct input_report {
+ uint8_t *data;
+ size_t len;
+ struct input_report *next;
+};
+
+
+struct hid_device_ {
+ /* Handle to the actual device. */
+ libusb_device_handle *device_handle;
+
+ /* Endpoint information */
+ int input_endpoint;
+ int output_endpoint;
+ int input_ep_max_packet_size;
+
+ /* The interface number of the HID */
+ int interface;
+
+ /* Indexes of Strings */
+ int manufacturer_index;
+ int product_index;
+ int serial_index;
+
+ /* Whether blocking reads are used */
+ int blocking; /* boolean */
+
+ /* Read thread objects */
+ pthread_t thread;
+ pthread_mutex_t mutex; /* Protects input_reports */
+ pthread_cond_t condition;
+ pthread_barrier_t barrier; /* Ensures correct startup sequence */
+ int shutdown_thread;
+ int cancelled;
+ struct libusb_transfer *transfer;
+
+ /* List of received input reports. */
+ struct input_report *input_reports;
+};
+
+static libusb_context *usb_context = NULL;
+
+uint16_t get_usb_code_for_current_locale(void);
+static int return_data(hid_device *dev, unsigned char *data, size_t length);
+
+static hid_device *new_hid_device(void)
+{
+ hid_device *dev = calloc(1, sizeof(hid_device));
+ dev->blocking = 1;
+
+ pthread_mutex_init(&dev->mutex, NULL);
+ pthread_cond_init(&dev->condition, NULL);
+ pthread_barrier_init(&dev->barrier, NULL, 2);
+
+ return dev;
+}
+
+static void free_hid_device(hid_device *dev)
+{
+ /* Clean up the thread objects */
+ pthread_barrier_destroy(&dev->barrier);
+ pthread_cond_destroy(&dev->condition);
+ pthread_mutex_destroy(&dev->mutex);
+
+ /* Free the device itself */
+ free(dev);
+}
+
+#if 0
+/*TODO: Implement this funciton on hidapi/libusb.. */
+static void register_error(hid_device *device, const char *op)
+{
+
+}
+#endif
+
+#ifdef INVASIVE_GET_USAGE
+/* Get bytes from a HID Report Descriptor.
+ Only call with a num_bytes of 0, 1, 2, or 4. */
+static uint32_t get_bytes(uint8_t *rpt, size_t len, size_t num_bytes, size_t cur)
+{
+ /* Return if there aren't enough bytes. */
+ if (cur + num_bytes >= len)
+ return 0;
+
+ if (num_bytes == 0)
+ return 0;
+ else if (num_bytes == 1) {
+ return rpt[cur+1];
+ }
+ else if (num_bytes == 2) {
+ return (rpt[cur+2] * 256 + rpt[cur+1]);
+ }
+ else if (num_bytes == 4) {
+ return (rpt[cur+4] * 0x01000000 +
+ rpt[cur+3] * 0x00010000 +
+ rpt[cur+2] * 0x00000100 +
+ rpt[cur+1] * 0x00000001);
+ }
+ else
+ return 0;
+}
+
+/* Retrieves the device's Usage Page and Usage from the report
+ descriptor. The algorithm is simple, as it just returns the first
+ Usage and Usage Page that it finds in the descriptor.
+ The return value is 0 on success and -1 on failure. */
+static int get_usage(uint8_t *report_descriptor, size_t size,
+ unsigned short *usage_page, unsigned short *usage)
+{
+ unsigned int i = 0;
+ int size_code;
+ int data_len, key_size;
+ int usage_found = 0, usage_page_found = 0;
+
+ while (i < size) {
+ int key = report_descriptor[i];
+ int key_cmd = key & 0xfc;
+
+ //printf("key: %02hhx\n", key);
+
+ if ((key & 0xf0) == 0xf0) {
+ /* This is a Long Item. The next byte contains the
+ length of the data section (value) for this key.
+ See the HID specification, version 1.11, section
+ 6.2.2.3, titled "Long Items." */
+ if (i+1 < size)
+ data_len = report_descriptor[i+1];
+ else
+ data_len = 0; /* malformed report */
+ key_size = 3;
+ }
+ else {
+ /* This is a Short Item. The bottom two bits of the
+ key contain the size code for the data section
+ (value) for this key. Refer to the HID
+ specification, version 1.11, section 6.2.2.2,
+ titled "Short Items." */
+ size_code = key & 0x3;
+ switch (size_code) {
+ case 0:
+ case 1:
+ case 2:
+ data_len = size_code;
+ break;
+ case 3:
+ data_len = 4;
+ break;
+ default:
+ /* Can't ever happen since size_code is & 0x3 */
+ data_len = 0;
+ break;
+ };
+ key_size = 1;
+ }
+
+ if (key_cmd == 0x4) {
+ *usage_page = get_bytes(report_descriptor, size, data_len, i);
+ usage_page_found = 1;
+ //printf("Usage Page: %x\n", (uint32_t)*usage_page);
+ }
+ if (key_cmd == 0x8) {
+ *usage = get_bytes(report_descriptor, size, data_len, i);
+ usage_found = 1;
+ //printf("Usage: %x\n", (uint32_t)*usage);
+ }
+
+ if (usage_page_found && usage_found)
+ return 0; /* success */
+
+ /* Skip over this key and it's associated data */
+ i += data_len + key_size;
+ }
+
+ return -1; /* failure */
+}
+#endif /* INVASIVE_GET_USAGE */
+
+#if defined(__FreeBSD__) && __FreeBSD__ < 10
+/* The libusb version included in FreeBSD < 10 doesn't have this function. In
+ mainline libusb, it's inlined in libusb.h. This function will bear a striking
+ resemblance to that one, because there's about one way to code it.
+
+ Note that the data parameter is Unicode in UTF-16LE encoding.
+ Return value is the number of bytes in data, or LIBUSB_ERROR_*.
+ */
+static inline int libusb_get_string_descriptor(libusb_device_handle *dev,
+ uint8_t descriptor_index, uint16_t lang_id,
+ unsigned char *data, int length)
+{
+ return libusb_control_transfer(dev,
+ LIBUSB_ENDPOINT_IN | 0x0, /* Endpoint 0 IN */
+ LIBUSB_REQUEST_GET_DESCRIPTOR,
+ (LIBUSB_DT_STRING << 8) | descriptor_index,
+ lang_id, data, (uint16_t) length, 1000);
+}
+
+#endif
+
+
+/* Get the first language the device says it reports. This comes from
+ USB string #0. */
+static uint16_t get_first_language(libusb_device_handle *dev)
+{
+ uint16_t buf[32];
+ int len;
+
+ /* Get the string from libusb. */
+ len = libusb_get_string_descriptor(dev,
+ 0x0, /* String ID */
+ 0x0, /* Language */
+ (unsigned char*)buf,
+ sizeof(buf));
+ if (len < 4)
+ return 0x0;
+
+ return buf[1]; /* First two bytes are len and descriptor type. */
+}
+
+static int is_language_supported(libusb_device_handle *dev, uint16_t lang)
+{
+ uint16_t buf[32];
+ int len;
+ int i;
+
+ /* Get the string from libusb. */
+ len = libusb_get_string_descriptor(dev,
+ 0x0, /* String ID */
+ 0x0, /* Language */
+ (unsigned char*)buf,
+ sizeof(buf));
+ if (len < 4)
+ return 0x0;
+
+
+ len /= 2; /* language IDs are two-bytes each. */
+ /* Start at index 1 because there are two bytes of protocol data. */
+ for (i = 1; i < len; i++) {
+ if (buf[i] == lang)
+ return 1;
+ }
+
+ return 0;
+}
+
+
+/* This function returns a newly allocated wide string containing the USB
+ device string numbered by the index. The returned string must be freed
+ by using free(). */
+static wchar_t *get_usb_string(libusb_device_handle *dev, uint8_t idx)
+{
+ char buf[512];
+ int len;
+ wchar_t *str = NULL;
+
+#ifndef __ANDROID__ /* we don't use iconv on Android */
+ wchar_t wbuf[256];
+ /* iconv variables */
+ iconv_t ic;
+ size_t inbytes;
+ size_t outbytes;
+ size_t res;
+#ifdef __FreeBSD__
+ const char *inptr;
+#else
+ char *inptr;
+#endif
+ char *outptr;
+#endif
+
+ /* Determine which language to use. */
+ uint16_t lang;
+ lang = get_usb_code_for_current_locale();
+ if (!is_language_supported(dev, lang))
+ lang = get_first_language(dev);
+
+ /* Get the string from libusb. */
+ len = libusb_get_string_descriptor(dev,
+ idx,
+ lang,
+ (unsigned char*)buf,
+ sizeof(buf));
+ if (len < 0)
+ return NULL;
+
+#ifdef __ANDROID__
+
+ /* Bionic does not have iconv support nor wcsdup() function, so it
+ has to be done manually. The following code will only work for
+ code points that can be represented as a single UTF-16 character,
+ and will incorrectly convert any code points which require more
+ than one UTF-16 character.
+
+ Skip over the first character (2-bytes). */
+ len -= 2;
+ str = malloc((len / 2 + 1) * sizeof(wchar_t));
+ int i;
+ for (i = 0; i < len / 2; i++) {
+ str[i] = buf[i * 2 + 2] | (buf[i * 2 + 3] << 8);
+ }
+ str[len / 2] = 0x00000000;
+
+#else
+
+ /* buf does not need to be explicitly NULL-terminated because
+ it is only passed into iconv() which does not need it. */
+
+ /* Initialize iconv. */
+ ic = iconv_open("WCHAR_T", "UTF-16LE");
+ if (ic == (iconv_t)-1) {
+ LOG("iconv_open() failed\n");
+ return NULL;
+ }
+
+ /* Convert to native wchar_t (UTF-32 on glibc/BSD systems).
+ Skip the first character (2-bytes). */
+ inptr = buf+2;
+ inbytes = len-2;
+ outptr = (char*) wbuf;
+ outbytes = sizeof(wbuf);
+ res = iconv(ic, &inptr, &inbytes, &outptr, &outbytes);
+ if (res == (size_t)-1) {
+ LOG("iconv() failed\n");
+ goto err;
+ }
+
+ /* Write the terminating NULL. */
+ wbuf[sizeof(wbuf)/sizeof(wbuf[0])-1] = 0x00000000;
+ if (outbytes >= sizeof(wbuf[0]))
+ *((wchar_t*)outptr) = 0x00000000;
+
+ /* Allocate and copy the string. */
+ str = wcsdup(wbuf);
+
+err:
+ iconv_close(ic);
+
+#endif
+
+ return str;
+}
+
+static char *make_path(libusb_device *dev, int interface_number)
+{
+ char str[64];
+ snprintf(str, sizeof(str), "%04x:%04x:%02x",
+ libusb_get_bus_number(dev),
+ libusb_get_device_address(dev),
+ interface_number);
+ str[sizeof(str)-1] = '\0';
+
+ return strdup(str);
+}
+
+
+int HID_API_EXPORT hid_init(void)
+{
+ if (!usb_context) {
+ const char *locale;
+
+ /* Init Libusb */
+ if (libusb_init(&usb_context))
+ return -1;
+
+ /* Set the locale if it's not set. */
+ locale = setlocale(LC_CTYPE, NULL);
+ if (!locale)
+ setlocale(LC_CTYPE, "");
+ }
+
+ return 0;
+}
+
+int HID_API_EXPORT hid_exit(void)
+{
+ if (usb_context) {
+ libusb_exit(usb_context);
+ usb_context = NULL;
+ }
+
+ return 0;
+}
+
+struct hid_device_info HID_API_EXPORT *hid_enumerate(unsigned short vendor_id, unsigned short product_id)
+{
+ libusb_device **devs;
+ libusb_device *dev;
+ libusb_device_handle *handle;
+ ssize_t num_devs;
+ int i = 0;
+
+ struct hid_device_info *root = NULL; /* return object */
+ struct hid_device_info *cur_dev = NULL;
+
+ if(hid_init() < 0)
+ return NULL;
+
+ num_devs = libusb_get_device_list(usb_context, &devs);
+ if (num_devs < 0)
+ return NULL;
+ while ((dev = devs[i++]) != NULL) {
+ struct libusb_device_descriptor desc;
+ struct libusb_config_descriptor *conf_desc = NULL;
+ int j, k;
+ int interface_num = 0;
+
+ int res = libusb_get_device_descriptor(dev, &desc);
+ unsigned short dev_vid = desc.idVendor;
+ unsigned short dev_pid = desc.idProduct;
+
+ res = libusb_get_active_config_descriptor(dev, &conf_desc);
+ if (res < 0)
+ libusb_get_config_descriptor(dev, 0, &conf_desc);
+ if (conf_desc) {
+ for (j = 0; j < conf_desc->bNumInterfaces; j++) {
+ const struct libusb_interface *intf = &conf_desc->interface[j];
+ for (k = 0; k < intf->num_altsetting; k++) {
+ const struct libusb_interface_descriptor *intf_desc;
+ intf_desc = &intf->altsetting[k];
+ if (intf_desc->bInterfaceClass == LIBUSB_CLASS_HID) {
+ interface_num = intf_desc->bInterfaceNumber;
+
+ /* Check the VID/PID against the arguments */
+ if ((vendor_id == 0x0 || vendor_id == dev_vid) &&
+ (product_id == 0x0 || product_id == dev_pid)) {
+ struct hid_device_info *tmp;
+
+ /* VID/PID match. Create the record. */
+ tmp = calloc(1, sizeof(struct hid_device_info));
+ if (cur_dev) {
+ cur_dev->next = tmp;
+ }
+ else {
+ root = tmp;
+ }
+ cur_dev = tmp;
+
+ /* Fill out the record */
+ cur_dev->next = NULL;
+ cur_dev->path = make_path(dev, interface_num);
+
+ res = libusb_open(dev, &handle);
+
+ if (res >= 0) {
+ /* Serial Number */
+ if (desc.iSerialNumber > 0)
+ cur_dev->serial_number =
+ get_usb_string(handle, desc.iSerialNumber);
+
+ /* Manufacturer and Product strings */
+ if (desc.iManufacturer > 0)
+ cur_dev->manufacturer_string =
+ get_usb_string(handle, desc.iManufacturer);
+ if (desc.iProduct > 0)
+ cur_dev->product_string =
+ get_usb_string(handle, desc.iProduct);
+
+#ifdef INVASIVE_GET_USAGE
+{
+ /*
+ This section is removed because it is too
+ invasive on the system. Getting a Usage Page
+ and Usage requires parsing the HID Report
+ descriptor. Getting a HID Report descriptor
+ involves claiming the interface. Claiming the
+ interface involves detaching the kernel driver.
+ Detaching the kernel driver is hard on the system
+ because it will unclaim interfaces (if another
+ app has them claimed) and the re-attachment of
+ the driver will sometimes change /dev entry names.
+ It is for these reasons that this section is
+ #if 0. For composite devices, use the interface
+ field in the hid_device_info struct to distinguish
+ between interfaces. */
+ unsigned char data[256];
+#ifdef DETACH_KERNEL_DRIVER
+ int detached = 0;
+ /* Usage Page and Usage */
+ res = libusb_kernel_driver_active(handle, interface_num);
+ if (res == 1) {
+ res = libusb_detach_kernel_driver(handle, interface_num);
+ if (res < 0)
+ LOG("Couldn't detach kernel driver, even though a kernel driver was attached.");
+ else
+ detached = 1;
+ }
+#endif
+ res = libusb_claim_interface(handle, interface_num);
+ if (res >= 0) {
+ /* Get the HID Report Descriptor. */
+ res = libusb_control_transfer(handle, LIBUSB_ENDPOINT_IN|LIBUSB_RECIPIENT_INTERFACE, LIBUSB_REQUEST_GET_DESCRIPTOR, (LIBUSB_DT_REPORT << 8)|interface_num, 0, data, sizeof(data), 5000);
+ if (res >= 0) {
+ unsigned short page=0, usage=0;
+ /* Parse the usage and usage page
+ out of the report descriptor. */
+ get_usage(data, res, &page, &usage);
+ cur_dev->usage_page = page;
+ cur_dev->usage = usage;
+ }
+ else
+ LOG("libusb_control_transfer() for getting the HID report failed with %d\n", res);
+
+ /* Release the interface */
+ res = libusb_release_interface(handle, interface_num);
+ if (res < 0)
+ LOG("Can't release the interface.\n");
+ }
+ else
+ LOG("Can't claim interface %d\n", res);
+#ifdef DETACH_KERNEL_DRIVER
+ /* Re-attach kernel driver if necessary. */
+ if (detached) {
+ res = libusb_attach_kernel_driver(handle, interface_num);
+ if (res < 0)
+ LOG("Couldn't re-attach kernel driver.\n");
+ }
+#endif
+}
+#endif /* INVASIVE_GET_USAGE */
+
+ libusb_close(handle);
+ }
+ /* VID/PID */
+ cur_dev->vendor_id = dev_vid;
+ cur_dev->product_id = dev_pid;
+
+ /* Release Number */
+ cur_dev->release_number = desc.bcdDevice;
+
+ /* Interface Number */
+ cur_dev->interface_number = interface_num;
+ }
+ }
+ } /* altsettings */
+ } /* interfaces */
+ libusb_free_config_descriptor(conf_desc);
+ }
+ }
+
+ libusb_free_device_list(devs, 1);
+
+ return root;
+}
+
+void HID_API_EXPORT hid_free_enumeration(struct hid_device_info *devs)
+{
+ struct hid_device_info *d = devs;
+ while (d) {
+ struct hid_device_info *next = d->next;
+ free(d->path);
+ free(d->serial_number);
+ free(d->manufacturer_string);
+ free(d->product_string);
+ free(d);
+ d = next;
+ }
+}
+
+hid_device * hid_open(unsigned short vendor_id, unsigned short product_id, const wchar_t *serial_number)
+{
+ struct hid_device_info *devs, *cur_dev;
+ const char *path_to_open = NULL;
+ hid_device *handle = NULL;
+
+ devs = hid_enumerate(vendor_id, product_id);
+ cur_dev = devs;
+ while (cur_dev) {
+ if (cur_dev->vendor_id == vendor_id &&
+ cur_dev->product_id == product_id) {
+ if (serial_number) {
+ if (cur_dev->serial_number &&
+ wcscmp(serial_number, cur_dev->serial_number) == 0) {
+ path_to_open = cur_dev->path;
+ break;
+ }
+ }
+ else {
+ path_to_open = cur_dev->path;
+ break;
+ }
+ }
+ cur_dev = cur_dev->next;
+ }
+
+ if (path_to_open) {
+ /* Open the device */
+ handle = hid_open_path(path_to_open);
+ }
+
+ hid_free_enumeration(devs);
+
+ return handle;
+}
+
+static void read_callback(struct libusb_transfer *transfer)
+{
+ hid_device *dev = transfer->user_data;
+ int res;
+
+ if (transfer->status == LIBUSB_TRANSFER_COMPLETED) {
+
+ struct input_report *rpt = malloc(sizeof(*rpt));
+ rpt->data = malloc(transfer->actual_length);
+ memcpy(rpt->data, transfer->buffer, transfer->actual_length);
+ rpt->len = transfer->actual_length;
+ rpt->next = NULL;
+
+ pthread_mutex_lock(&dev->mutex);
+
+ /* Attach the new report object to the end of the list. */
+ if (dev->input_reports == NULL) {
+ /* The list is empty. Put it at the root. */
+ dev->input_reports = rpt;
+ pthread_cond_signal(&dev->condition);
+ }
+ else {
+ /* Find the end of the list and attach. */
+ struct input_report *cur = dev->input_reports;
+ int num_queued = 0;
+ while (cur->next != NULL) {
+ cur = cur->next;
+ num_queued++;
+ }
+ cur->next = rpt;
+
+ /* Pop one off if we've reached 30 in the queue. This
+ way we don't grow forever if the user never reads
+ anything from the device. */
+ if (num_queued > 30) {
+ return_data(dev, NULL, 0);
+ }
+ }
+ pthread_mutex_unlock(&dev->mutex);
+ }
+ else if (transfer->status == LIBUSB_TRANSFER_CANCELLED) {
+ dev->shutdown_thread = 1;
+ dev->cancelled = 1;
+ return;
+ }
+ else if (transfer->status == LIBUSB_TRANSFER_NO_DEVICE) {
+ dev->shutdown_thread = 1;
+ dev->cancelled = 1;
+ return;
+ }
+ else if (transfer->status == LIBUSB_TRANSFER_TIMED_OUT) {
+ //LOG("Timeout (normal)\n");
+ }
+ else {
+ LOG("Unknown transfer code: %d\n", transfer->status);
+ }
+
+ /* Re-submit the transfer object. */
+ res = libusb_submit_transfer(transfer);
+ if (res != 0) {
+ LOG("Unable to submit URB. libusb error code: %d\n", res);
+ dev->shutdown_thread = 1;
+ dev->cancelled = 1;
+ }
+}
+
+
+static void *read_thread(void *param)
+{
+ hid_device *dev = param;
+ unsigned char *buf;
+ const size_t length = dev->input_ep_max_packet_size;
+
+ /* Set up the transfer object. */
+ buf = malloc(length);
+ dev->transfer = libusb_alloc_transfer(0);
+ libusb_fill_interrupt_transfer(dev->transfer,
+ dev->device_handle,
+ dev->input_endpoint,
+ buf,
+ length,
+ read_callback,
+ dev,
+ 5000/*timeout*/);
+
+ /* Make the first submission. Further submissions are made
+ from inside read_callback() */
+ libusb_submit_transfer(dev->transfer);
+
+ /* Notify the main thread that the read thread is up and running. */
+ pthread_barrier_wait(&dev->barrier);
+
+ /* Handle all the events. */
+ while (!dev->shutdown_thread) {
+ int res;
+ res = libusb_handle_events(usb_context);
+ if (res < 0) {
+ /* There was an error. */
+ LOG("read_thread(): libusb reports error # %d\n", res);
+
+ /* Break out of this loop only on fatal error.*/
+ if (res != LIBUSB_ERROR_BUSY &&
+ res != LIBUSB_ERROR_TIMEOUT &&
+ res != LIBUSB_ERROR_OVERFLOW &&
+ res != LIBUSB_ERROR_INTERRUPTED) {
+ break;
+ }
+ }
+ }
+
+ /* Cancel any transfer that may be pending. This call will fail
+ if no transfers are pending, but that's OK. */
+ libusb_cancel_transfer(dev->transfer);
+
+ while (!dev->cancelled)
+ libusb_handle_events_completed(usb_context, &dev->cancelled);
+
+ /* Now that the read thread is stopping, Wake any threads which are
+ waiting on data (in hid_read_timeout()). Do this under a mutex to
+ make sure that a thread which is about to go to sleep waiting on
+ the condition actually will go to sleep before the condition is
+ signaled. */
+ pthread_mutex_lock(&dev->mutex);
+ pthread_cond_broadcast(&dev->condition);
+ pthread_mutex_unlock(&dev->mutex);
+
+ /* The dev->transfer->buffer and dev->transfer objects are cleaned up
+ in hid_close(). They are not cleaned up here because this thread
+ could end either due to a disconnect or due to a user
+ call to hid_close(). In both cases the objects can be safely
+ cleaned up after the call to pthread_join() (in hid_close()), but
+ since hid_close() calls libusb_cancel_transfer(), on these objects,
+ they can not be cleaned up here. */
+
+ return NULL;
+}
+
+
+hid_device * HID_API_EXPORT hid_open_path(const char *path)
+{
+ hid_device *dev = NULL;
+
+ libusb_device **devs;
+ libusb_device *usb_dev;
+ int res;
+ int d = 0;
+ int good_open = 0;
+
+ if(hid_init() < 0)
+ return NULL;
+
+ dev = new_hid_device();
+
+ libusb_get_device_list(usb_context, &devs);
+ while ((usb_dev = devs[d++]) != NULL) {
+ struct libusb_device_descriptor desc;
+ struct libusb_config_descriptor *conf_desc = NULL;
+ int i,j,k;
+ libusb_get_device_descriptor(usb_dev, &desc);
+
+ if (libusb_get_active_config_descriptor(usb_dev, &conf_desc) < 0)
+ continue;
+ for (j = 0; j < conf_desc->bNumInterfaces; j++) {
+ const struct libusb_interface *intf = &conf_desc->interface[j];
+ for (k = 0; k < intf->num_altsetting; k++) {
+ const struct libusb_interface_descriptor *intf_desc;
+ intf_desc = &intf->altsetting[k];
+ if (intf_desc->bInterfaceClass == LIBUSB_CLASS_HID) {
+ char *dev_path = make_path(usb_dev, intf_desc->bInterfaceNumber);
+ if (!strcmp(dev_path, path)) {
+ /* Matched Paths. Open this device */
+
+ /* OPEN HERE */
+ res = libusb_open(usb_dev, &dev->device_handle);
+ if (res < 0) {
+ LOG("can't open device\n");
+ free(dev_path);
+ break;
+ }
+ good_open = 1;
+#ifdef DETACH_KERNEL_DRIVER
+ /* Detach the kernel driver, but only if the
+ device is managed by the kernel */
+ if (libusb_kernel_driver_active(dev->device_handle, intf_desc->bInterfaceNumber) == 1) {
+ res = libusb_detach_kernel_driver(dev->device_handle, intf_desc->bInterfaceNumber);
+ if (res < 0) {
+ libusb_close(dev->device_handle);
+ LOG("Unable to detach Kernel Driver\n");
+ free(dev_path);
+ good_open = 0;
+ break;
+ }
+ }
+#endif
+ res = libusb_claim_interface(dev->device_handle, intf_desc->bInterfaceNumber);
+ if (res < 0) {
+ LOG("can't claim interface %d: %d\n", intf_desc->bInterfaceNumber, res);
+ free(dev_path);
+ libusb_close(dev->device_handle);
+ good_open = 0;
+ break;
+ }
+
+ /* Store off the string descriptor indexes */
+ dev->manufacturer_index = desc.iManufacturer;
+ dev->product_index = desc.iProduct;
+ dev->serial_index = desc.iSerialNumber;
+
+ /* Store off the interface number */
+ dev->interface = intf_desc->bInterfaceNumber;
+
+ /* Find the INPUT and OUTPUT endpoints. An
+ OUTPUT endpoint is not required. */
+ for (i = 0; i < intf_desc->bNumEndpoints; i++) {
+ const struct libusb_endpoint_descriptor *ep
+ = &intf_desc->endpoint[i];
+
+ /* Determine the type and direction of this
+ endpoint. */
+ int is_interrupt =
+ (ep->bmAttributes & LIBUSB_TRANSFER_TYPE_MASK)
+ == LIBUSB_TRANSFER_TYPE_INTERRUPT;
+ int is_output =
+ (ep->bEndpointAddress & LIBUSB_ENDPOINT_DIR_MASK)
+ == LIBUSB_ENDPOINT_OUT;
+ int is_input =
+ (ep->bEndpointAddress & LIBUSB_ENDPOINT_DIR_MASK)
+ == LIBUSB_ENDPOINT_IN;
+
+ /* Decide whether to use it for input or output. */
+ if (dev->input_endpoint == 0 &&
+ is_interrupt && is_input) {
+ /* Use this endpoint for INPUT */
+ dev->input_endpoint = ep->bEndpointAddress;
+ dev->input_ep_max_packet_size = ep->wMaxPacketSize;
+ }
+ if (dev->output_endpoint == 0 &&
+ is_interrupt && is_output) {
+ /* Use this endpoint for OUTPUT */
+ dev->output_endpoint = ep->bEndpointAddress;
+ }
+ }
+
+ pthread_create(&dev->thread, NULL, read_thread, dev);
+
+ /* Wait here for the read thread to be initialized. */
+ pthread_barrier_wait(&dev->barrier);
+
+ }
+ free(dev_path);
+ }
+ }
+ }
+ libusb_free_config_descriptor(conf_desc);
+
+ }
+
+ libusb_free_device_list(devs, 1);
+
+ /* If we have a good handle, return it. */
+ if (good_open) {
+ return dev;
+ }
+ else {
+ /* Unable to open any devices. */
+ free_hid_device(dev);
+ return NULL;
+ }
+}
+
+
+int HID_API_EXPORT hid_write(hid_device *dev, const unsigned char *data, size_t length)
+{
+ int res;
+ int report_number = data[0];
+ int skipped_report_id = 0;
+
+ if (report_number == 0x0) {
+ data++;
+ length--;
+ skipped_report_id = 1;
+ }
+
+
+ if (dev->output_endpoint <= 0) {
+ /* No interrupt out endpoint. Use the Control Endpoint */
+ res = libusb_control_transfer(dev->device_handle,
+ LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT,
+ 0x09/*HID Set_Report*/,
+ (2/*HID output*/ << 8) | report_number,
+ dev->interface,
+ (unsigned char *)data, length,
+ 1000/*timeout millis*/);
+
+ if (res < 0)
+ return -1;
+
+ if (skipped_report_id)
+ length++;
+
+ return length;
+ }
+ else {
+ /* Use the interrupt out endpoint */
+ int actual_length;
+ res = libusb_interrupt_transfer(dev->device_handle,
+ dev->output_endpoint,
+ (unsigned char*)data,
+ length,
+ &actual_length, 1000);
+
+ if (res < 0)
+ return -1;
+
+ if (skipped_report_id)
+ actual_length++;
+
+ return actual_length;
+ }
+}
+
+/* Helper function, to simplify hid_read().
+ This should be called with dev->mutex locked. */
+static int return_data(hid_device *dev, unsigned char *data, size_t length)
+{
+ /* Copy the data out of the linked list item (rpt) into the
+ return buffer (data), and delete the liked list item. */
+ struct input_report *rpt = dev->input_reports;
+ size_t len = (length < rpt->len)? length: rpt->len;
+ if (len > 0)
+ memcpy(data, rpt->data, len);
+ dev->input_reports = rpt->next;
+ free(rpt->data);
+ free(rpt);
+ return len;
+}
+
+static void cleanup_mutex(void *param)
+{
+ hid_device *dev = param;
+ pthread_mutex_unlock(&dev->mutex);
+}
+
+
+int HID_API_EXPORT hid_read_timeout(hid_device *dev, unsigned char *data, size_t length, int milliseconds)
+{
+ int bytes_read = -1;
+
+#if 0
+ int transferred;
+ int res = libusb_interrupt_transfer(dev->device_handle, dev->input_endpoint, data, length, &transferred, 5000);
+ LOG("transferred: %d\n", transferred);
+ return transferred;
+#endif
+
+ pthread_mutex_lock(&dev->mutex);
+ pthread_cleanup_push(&cleanup_mutex, dev);
+
+ /* There's an input report queued up. Return it. */
+ if (dev->input_reports) {
+ /* Return the first one */
+ bytes_read = return_data(dev, data, length);
+ goto ret;
+ }
+
+ if (dev->shutdown_thread) {
+ /* This means the device has been disconnected.
+ An error code of -1 should be returned. */
+ bytes_read = -1;
+ goto ret;
+ }
+
+ if (milliseconds == -1) {
+ /* Blocking */
+ while (!dev->input_reports && !dev->shutdown_thread) {
+ pthread_cond_wait(&dev->condition, &dev->mutex);
+ }
+ if (dev->input_reports) {
+ bytes_read = return_data(dev, data, length);
+ }
+ }
+ else if (milliseconds > 0) {
+ /* Non-blocking, but called with timeout. */
+ int res;
+ struct timespec ts;
+ clock_gettime(CLOCK_REALTIME, &ts);
+ ts.tv_sec += milliseconds / 1000;
+ ts.tv_nsec += (milliseconds % 1000) * 1000000;
+ if (ts.tv_nsec >= 1000000000L) {
+ ts.tv_sec++;
+ ts.tv_nsec -= 1000000000L;
+ }
+
+ while (!dev->input_reports && !dev->shutdown_thread) {
+ res = pthread_cond_timedwait(&dev->condition, &dev->mutex, &ts);
+ if (res == 0) {
+ if (dev->input_reports) {
+ bytes_read = return_data(dev, data, length);
+ break;
+ }
+
+ /* If we're here, there was a spurious wake up
+ or the read thread was shutdown. Run the
+ loop again (ie: don't break). */
+ }
+ else if (res == ETIMEDOUT) {
+ /* Timed out. */
+ bytes_read = 0;
+ break;
+ }
+ else {
+ /* Error. */
+ bytes_read = -1;
+ break;
+ }
+ }
+ }
+ else {
+ /* Purely non-blocking */
+ bytes_read = 0;
+ }
+
+ret:
+ pthread_mutex_unlock(&dev->mutex);
+ pthread_cleanup_pop(0);
+
+ return bytes_read;
+}
+
+int HID_API_EXPORT hid_read(hid_device *dev, unsigned char *data, size_t length)
+{
+ return hid_read_timeout(dev, data, length, dev->blocking ? -1 : 0);
+}
+
+int HID_API_EXPORT hid_set_nonblocking(hid_device *dev, int nonblock)
+{
+ dev->blocking = !nonblock;
+
+ return 0;
+}
+
+
+int HID_API_EXPORT hid_send_feature_report(hid_device *dev, const unsigned char *data, size_t length)
+{
+ int res = -1;
+ int skipped_report_id = 0;
+ int report_number = data[0];
+
+ if (report_number == 0x0) {
+ data++;
+ length--;
+ skipped_report_id = 1;
+ }
+
+ res = libusb_control_transfer(dev->device_handle,
+ LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT,
+ 0x09/*HID set_report*/,
+ (3/*HID feature*/ << 8) | report_number,
+ dev->interface,
+ (unsigned char *)data, length,
+ 1000/*timeout millis*/);
+
+ if (res < 0)
+ return -1;
+
+ /* Account for the report ID */
+ if (skipped_report_id)
+ length++;
+
+ return length;
+}
+
+int HID_API_EXPORT hid_get_feature_report(hid_device *dev, unsigned char *data, size_t length)
+{
+ int res = -1;
+ int skipped_report_id = 0;
+ int report_number = data[0];
+
+ if (report_number == 0x0) {
+ /* Offset the return buffer by 1, so that the report ID
+ will remain in byte 0. */
+ data++;
+ length--;
+ skipped_report_id = 1;
+ }
+ res = libusb_control_transfer(dev->device_handle,
+ LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_IN,
+ 0x01/*HID get_report*/,
+ (3/*HID feature*/ << 8) | report_number,
+ dev->interface,
+ (unsigned char *)data, length,
+ 1000/*timeout millis*/);
+
+ if (res < 0)
+ return -1;
+
+ if (skipped_report_id)
+ res++;
+
+ return res;
+}
+
+
+void HID_API_EXPORT hid_close(hid_device *dev)
+{
+ if (!dev)
+ return;
+
+ /* Cause read_thread() to stop. */
+ dev->shutdown_thread = 1;
+ libusb_cancel_transfer(dev->transfer);
+
+ /* Wait for read_thread() to end. */
+ pthread_join(dev->thread, NULL);
+
+ /* Clean up the Transfer objects allocated in read_thread(). */
+ free(dev->transfer->buffer);
+ libusb_free_transfer(dev->transfer);
+
+ /* release the interface */
+ libusb_release_interface(dev->device_handle, dev->interface);
+
+ /* Close the handle */
+ libusb_close(dev->device_handle);
+
+ /* Clear out the queue of received reports. */
+ pthread_mutex_lock(&dev->mutex);
+ while (dev->input_reports) {
+ return_data(dev, NULL, 0);
+ }
+ pthread_mutex_unlock(&dev->mutex);
+
+ free_hid_device(dev);
+}
+
+
+int HID_API_EXPORT_CALL hid_get_manufacturer_string(hid_device *dev, wchar_t *string, size_t maxlen)
+{
+ return hid_get_indexed_string(dev, dev->manufacturer_index, string, maxlen);
+}
+
+int HID_API_EXPORT_CALL hid_get_product_string(hid_device *dev, wchar_t *string, size_t maxlen)
+{
+ return hid_get_indexed_string(dev, dev->product_index, string, maxlen);
+}
+
+int HID_API_EXPORT_CALL hid_get_serial_number_string(hid_device *dev, wchar_t *string, size_t maxlen)
+{
+ return hid_get_indexed_string(dev, dev->serial_index, string, maxlen);
+}
+
+int HID_API_EXPORT_CALL hid_get_indexed_string(hid_device *dev, int string_index, wchar_t *string, size_t maxlen)
+{
+ wchar_t *str;
+
+ str = get_usb_string(dev->device_handle, string_index);
+ if (str) {
+ wcsncpy(string, str, maxlen);
+ string[maxlen-1] = L'\0';
+ free(str);
+ return 0;
+ }
+ else
+ return -1;
+}
+
+
+HID_API_EXPORT const wchar_t * HID_API_CALL hid_error(hid_device *dev)
+{
+ return NULL;
+}
+
+
+struct lang_map_entry {
+ const char *name;
+ const char *string_code;
+ uint16_t usb_code;
+};
+
+#define LANG(name,code,usb_code) { name, code, usb_code }
+static struct lang_map_entry lang_map[] = {
+ LANG("Afrikaans", "af", 0x0436),
+ LANG("Albanian", "sq", 0x041C),
+ LANG("Arabic - United Arab Emirates", "ar_ae", 0x3801),
+ LANG("Arabic - Bahrain", "ar_bh", 0x3C01),
+ LANG("Arabic - Algeria", "ar_dz", 0x1401),
+ LANG("Arabic - Egypt", "ar_eg", 0x0C01),
+ LANG("Arabic - Iraq", "ar_iq", 0x0801),
+ LANG("Arabic - Jordan", "ar_jo", 0x2C01),
+ LANG("Arabic - Kuwait", "ar_kw", 0x3401),
+ LANG("Arabic - Lebanon", "ar_lb", 0x3001),
+ LANG("Arabic - Libya", "ar_ly", 0x1001),
+ LANG("Arabic - Morocco", "ar_ma", 0x1801),
+ LANG("Arabic - Oman", "ar_om", 0x2001),
+ LANG("Arabic - Qatar", "ar_qa", 0x4001),
+ LANG("Arabic - Saudi Arabia", "ar_sa", 0x0401),
+ LANG("Arabic - Syria", "ar_sy", 0x2801),
+ LANG("Arabic - Tunisia", "ar_tn", 0x1C01),
+ LANG("Arabic - Yemen", "ar_ye", 0x2401),
+ LANG("Armenian", "hy", 0x042B),
+ LANG("Azeri - Latin", "az_az", 0x042C),
+ LANG("Azeri - Cyrillic", "az_az", 0x082C),
+ LANG("Basque", "eu", 0x042D),
+ LANG("Belarusian", "be", 0x0423),
+ LANG("Bulgarian", "bg", 0x0402),
+ LANG("Catalan", "ca", 0x0403),
+ LANG("Chinese - China", "zh_cn", 0x0804),
+ LANG("Chinese - Hong Kong SAR", "zh_hk", 0x0C04),
+ LANG("Chinese - Macau SAR", "zh_mo", 0x1404),
+ LANG("Chinese - Singapore", "zh_sg", 0x1004),
+ LANG("Chinese - Taiwan", "zh_tw", 0x0404),
+ LANG("Croatian", "hr", 0x041A),
+ LANG("Czech", "cs", 0x0405),
+ LANG("Danish", "da", 0x0406),
+ LANG("Dutch - Netherlands", "nl_nl", 0x0413),
+ LANG("Dutch - Belgium", "nl_be", 0x0813),
+ LANG("English - Australia", "en_au", 0x0C09),
+ LANG("English - Belize", "en_bz", 0x2809),
+ LANG("English - Canada", "en_ca", 0x1009),
+ LANG("English - Caribbean", "en_cb", 0x2409),
+ LANG("English - Ireland", "en_ie", 0x1809),
+ LANG("English - Jamaica", "en_jm", 0x2009),
+ LANG("English - New Zealand", "en_nz", 0x1409),
+ LANG("English - Phillippines", "en_ph", 0x3409),
+ LANG("English - Southern Africa", "en_za", 0x1C09),
+ LANG("English - Trinidad", "en_tt", 0x2C09),
+ LANG("English - Great Britain", "en_gb", 0x0809),
+ LANG("English - United States", "en_us", 0x0409),
+ LANG("Estonian", "et", 0x0425),
+ LANG("Farsi", "fa", 0x0429),
+ LANG("Finnish", "fi", 0x040B),
+ LANG("Faroese", "fo", 0x0438),
+ LANG("French - France", "fr_fr", 0x040C),
+ LANG("French - Belgium", "fr_be", 0x080C),
+ LANG("French - Canada", "fr_ca", 0x0C0C),
+ LANG("French - Luxembourg", "fr_lu", 0x140C),
+ LANG("French - Switzerland", "fr_ch", 0x100C),
+ LANG("Gaelic - Ireland", "gd_ie", 0x083C),
+ LANG("Gaelic - Scotland", "gd", 0x043C),
+ LANG("German - Germany", "de_de", 0x0407),
+ LANG("German - Austria", "de_at", 0x0C07),
+ LANG("German - Liechtenstein", "de_li", 0x1407),
+ LANG("German - Luxembourg", "de_lu", 0x1007),
+ LANG("German - Switzerland", "de_ch", 0x0807),
+ LANG("Greek", "el", 0x0408),
+ LANG("Hebrew", "he", 0x040D),
+ LANG("Hindi", "hi", 0x0439),
+ LANG("Hungarian", "hu", 0x040E),
+ LANG("Icelandic", "is", 0x040F),
+ LANG("Indonesian", "id", 0x0421),
+ LANG("Italian - Italy", "it_it", 0x0410),
+ LANG("Italian - Switzerland", "it_ch", 0x0810),
+ LANG("Japanese", "ja", 0x0411),
+ LANG("Korean", "ko", 0x0412),
+ LANG("Latvian", "lv", 0x0426),
+ LANG("Lithuanian", "lt", 0x0427),
+ LANG("F.Y.R.O. Macedonia", "mk", 0x042F),
+ LANG("Malay - Malaysia", "ms_my", 0x043E),
+ LANG("Malay – Brunei", "ms_bn", 0x083E),
+ LANG("Maltese", "mt", 0x043A),
+ LANG("Marathi", "mr", 0x044E),
+ LANG("Norwegian - Bokml", "no_no", 0x0414),
+ LANG("Norwegian - Nynorsk", "no_no", 0x0814),
+ LANG("Polish", "pl", 0x0415),
+ LANG("Portuguese - Portugal", "pt_pt", 0x0816),
+ LANG("Portuguese - Brazil", "pt_br", 0x0416),
+ LANG("Raeto-Romance", "rm", 0x0417),
+ LANG("Romanian - Romania", "ro", 0x0418),
+ LANG("Romanian - Republic of Moldova", "ro_mo", 0x0818),
+ LANG("Russian", "ru", 0x0419),
+ LANG("Russian - Republic of Moldova", "ru_mo", 0x0819),
+ LANG("Sanskrit", "sa", 0x044F),
+ LANG("Serbian - Cyrillic", "sr_sp", 0x0C1A),
+ LANG("Serbian - Latin", "sr_sp", 0x081A),
+ LANG("Setsuana", "tn", 0x0432),
+ LANG("Slovenian", "sl", 0x0424),
+ LANG("Slovak", "sk", 0x041B),
+ LANG("Sorbian", "sb", 0x042E),
+ LANG("Spanish - Spain (Traditional)", "es_es", 0x040A),
+ LANG("Spanish - Argentina", "es_ar", 0x2C0A),
+ LANG("Spanish - Bolivia", "es_bo", 0x400A),
+ LANG("Spanish - Chile", "es_cl", 0x340A),
+ LANG("Spanish - Colombia", "es_co", 0x240A),
+ LANG("Spanish - Costa Rica", "es_cr", 0x140A),
+ LANG("Spanish - Dominican Republic", "es_do", 0x1C0A),
+ LANG("Spanish - Ecuador", "es_ec", 0x300A),
+ LANG("Spanish - Guatemala", "es_gt", 0x100A),
+ LANG("Spanish - Honduras", "es_hn", 0x480A),
+ LANG("Spanish - Mexico", "es_mx", 0x080A),
+ LANG("Spanish - Nicaragua", "es_ni", 0x4C0A),
+ LANG("Spanish - Panama", "es_pa", 0x180A),
+ LANG("Spanish - Peru", "es_pe", 0x280A),
+ LANG("Spanish - Puerto Rico", "es_pr", 0x500A),
+ LANG("Spanish - Paraguay", "es_py", 0x3C0A),
+ LANG("Spanish - El Salvador", "es_sv", 0x440A),
+ LANG("Spanish - Uruguay", "es_uy", 0x380A),
+ LANG("Spanish - Venezuela", "es_ve", 0x200A),
+ LANG("Southern Sotho", "st", 0x0430),
+ LANG("Swahili", "sw", 0x0441),
+ LANG("Swedish - Sweden", "sv_se", 0x041D),
+ LANG("Swedish - Finland", "sv_fi", 0x081D),
+ LANG("Tamil", "ta", 0x0449),
+ LANG("Tatar", "tt", 0X0444),
+ LANG("Thai", "th", 0x041E),
+ LANG("Turkish", "tr", 0x041F),
+ LANG("Tsonga", "ts", 0x0431),
+ LANG("Ukrainian", "uk", 0x0422),
+ LANG("Urdu", "ur", 0x0420),
+ LANG("Uzbek - Cyrillic", "uz_uz", 0x0843),
+ LANG("Uzbek – Latin", "uz_uz", 0x0443),
+ LANG("Vietnamese", "vi", 0x042A),
+ LANG("Xhosa", "xh", 0x0434),
+ LANG("Yiddish", "yi", 0x043D),
+ LANG("Zulu", "zu", 0x0435),
+ LANG(NULL, NULL, 0x0),
+};
+
+uint16_t get_usb_code_for_current_locale(void)
+{
+ char *locale;
+ char search_string[64];
+ char *ptr;
+ struct lang_map_entry *lang;
+
+ /* Get the current locale. */
+ locale = setlocale(0, NULL);
+ if (!locale)
+ return 0x0;
+
+ /* Make a copy of the current locale string. */
+ strncpy(search_string, locale, sizeof(search_string));
+ search_string[sizeof(search_string)-1] = '\0';
+
+ /* Chop off the encoding part, and make it lower case. */
+ ptr = search_string;
+ while (*ptr) {
+ *ptr = tolower(*ptr);
+ if (*ptr == '.') {
+ *ptr = '\0';
+ break;
+ }
+ ptr++;
+ }
+
+ /* Find the entry which matches the string code of our locale. */
+ lang = lang_map;
+ while (lang->string_code) {
+ if (!strcmp(lang->string_code, search_string)) {
+ return lang->usb_code;
+ }
+ lang++;
+ }
+
+ /* There was no match. Find with just the language only. */
+ /* Chop off the variant. Chop it off at the '_'. */
+ ptr = search_string;
+ while (*ptr) {
+ *ptr = tolower(*ptr);
+ if (*ptr == '_') {
+ *ptr = '\0';
+ break;
+ }
+ ptr++;
+ }
+
+#if 0 /* TODO: Do we need this? */
+ /* Find the entry which matches the string code of our language. */
+ lang = lang_map;
+ while (lang->string_code) {
+ if (!strcmp(lang->string_code, search_string)) {
+ return lang->usb_code;
+ }
+ lang++;
+ }
+#endif
+
+ /* Found nothing. */
+ return 0x0;
+}
+
+#ifdef __cplusplus
+}
+#endif
diff --git a/vendor/github.com/karalabe/hid/hidapi/mac/hid.c b/vendor/github.com/karalabe/hid/hidapi/mac/hid.c
new file mode 100644
index 0000000..e0756a1
--- /dev/null
+++ b/vendor/github.com/karalabe/hid/hidapi/mac/hid.c
@@ -0,0 +1,1110 @@
+/*******************************************************
+ HIDAPI - Multi-Platform library for
+ communication with HID devices.
+
+ Alan Ott
+ Signal 11 Software
+
+ 2010-07-03
+
+ Copyright 2010, All Rights Reserved.
+
+ At the discretion of the user of this library,
+ this software may be licensed under the terms of the
+ GNU General Public License v3, a BSD-Style license, or the
+ original HIDAPI license as outlined in the LICENSE.txt,
+ LICENSE-gpl3.txt, LICENSE-bsd.txt, and LICENSE-orig.txt
+ files located at the root of the source distribution.
+ These files may also be found in the public source
+ code repository located at:
+ http://github.com/signal11/hidapi .
+********************************************************/
+
+/* See Apple Technical Note TN2187 for details on IOHidManager. */
+
+#include <IOKit/hid/IOHIDManager.h>
+#include <IOKit/hid/IOHIDKeys.h>
+#include <IOKit/IOKitLib.h>
+#include <CoreFoundation/CoreFoundation.h>
+#include <wchar.h>
+#include <locale.h>
+#include <pthread.h>
+#include <sys/time.h>
+#include <unistd.h>
+#include <dlfcn.h>
+
+#include "hidapi.h"
+
+/* Barrier implementation because Mac OSX doesn't have pthread_barrier.
+ It also doesn't have clock_gettime(). So much for POSIX and SUSv2.
+ This implementation came from Brent Priddy and was posted on
+ StackOverflow. It is used with his permission. */
+typedef int pthread_barrierattr_t;
+typedef struct pthread_barrier {
+ pthread_mutex_t mutex;
+ pthread_cond_t cond;
+ int count;
+ int trip_count;
+} pthread_barrier_t;
+
+static int pthread_barrier_init(pthread_barrier_t *barrier, const pthread_barrierattr_t *attr, unsigned int count)
+{
+ if(count == 0) {
+ errno = EINVAL;
+ return -1;
+ }
+
+ if(pthread_mutex_init(&barrier->mutex, 0) < 0) {
+ return -1;
+ }
+ if(pthread_cond_init(&barrier->cond, 0) < 0) {
+ pthread_mutex_destroy(&barrier->mutex);
+ return -1;
+ }
+ barrier->trip_count = count;
+ barrier->count = 0;
+
+ return 0;
+}
+
+static int pthread_barrier_destroy(pthread_barrier_t *barrier)
+{
+ pthread_cond_destroy(&barrier->cond);
+ pthread_mutex_destroy(&barrier->mutex);
+ return 0;
+}
+
+static int pthread_barrier_wait(pthread_barrier_t *barrier)
+{
+ pthread_mutex_lock(&barrier->mutex);
+ ++(barrier->count);
+ if(barrier->count >= barrier->trip_count)
+ {
+ barrier->count = 0;
+ pthread_cond_broadcast(&barrier->cond);
+ pthread_mutex_unlock(&barrier->mutex);
+ return 1;
+ }
+ else
+ {
+ pthread_cond_wait(&barrier->cond, &(barrier->mutex));
+ pthread_mutex_unlock(&barrier->mutex);
+ return 0;
+ }
+}
+
+static int return_data(hid_device *dev, unsigned char *data, size_t length);
+
+/* Linked List of input reports received from the device. */
+struct input_report {
+ uint8_t *data;
+ size_t len;
+ struct input_report *next;
+};
+
+struct hid_device_ {
+ IOHIDDeviceRef device_handle;
+ int blocking;
+ int uses_numbered_reports;
+ int disconnected;
+ CFStringRef run_loop_mode;
+ CFRunLoopRef run_loop;
+ CFRunLoopSourceRef source;
+ uint8_t *input_report_buf;
+ CFIndex max_input_report_len;
+ struct input_report *input_reports;
+
+ pthread_t thread;
+ pthread_mutex_t mutex; /* Protects input_reports */
+ pthread_cond_t condition;
+ pthread_barrier_t barrier; /* Ensures correct startup sequence */
+ pthread_barrier_t shutdown_barrier; /* Ensures correct shutdown sequence */
+ int shutdown_thread;
+};
+
+static hid_device *new_hid_device(void)
+{
+ hid_device *dev = calloc(1, sizeof(hid_device));
+ dev->device_handle = NULL;
+ dev->blocking = 1;
+ dev->uses_numbered_reports = 0;
+ dev->disconnected = 0;
+ dev->run_loop_mode = NULL;
+ dev->run_loop = NULL;
+ dev->source = NULL;
+ dev->input_report_buf = NULL;
+ dev->input_reports = NULL;
+ dev->shutdown_thread = 0;
+
+ /* Thread objects */
+ pthread_mutex_init(&dev->mutex, NULL);
+ pthread_cond_init(&dev->condition, NULL);
+ pthread_barrier_init(&dev->barrier, NULL, 2);
+ pthread_barrier_init(&dev->shutdown_barrier, NULL, 2);
+
+ return dev;
+}
+
+static void free_hid_device(hid_device *dev)
+{
+ if (!dev)
+ return;
+
+ /* Delete any input reports still left over. */
+ struct input_report *rpt = dev->input_reports;
+ while (rpt) {
+ struct input_report *next = rpt->next;
+ free(rpt->data);
+ free(rpt);
+ rpt = next;
+ }
+
+ /* Free the string and the report buffer. The check for NULL
+ is necessary here as CFRelease() doesn't handle NULL like
+ free() and others do. */
+ if (dev->run_loop_mode)
+ CFRelease(dev->run_loop_mode);
+ if (dev->source)
+ CFRelease(dev->source);
+ free(dev->input_report_buf);
+
+ /* Clean up the thread objects */
+ pthread_barrier_destroy(&dev->shutdown_barrier);
+ pthread_barrier_destroy(&dev->barrier);
+ pthread_cond_destroy(&dev->condition);
+ pthread_mutex_destroy(&dev->mutex);
+
+ /* Free the structure itself. */
+ free(dev);
+}
+
+static IOHIDManagerRef hid_mgr = 0x0;
+
+
+#if 0
+static void register_error(hid_device *device, const char *op)
+{
+
+}
+#endif
+
+
+static int32_t get_int_property(IOHIDDeviceRef device, CFStringRef key)
+{
+ CFTypeRef ref;
+ int32_t value;
+
+ ref = IOHIDDeviceGetProperty(device, key);
+ if (ref) {
+ if (CFGetTypeID(ref) == CFNumberGetTypeID()) {
+ CFNumberGetValue((CFNumberRef) ref, kCFNumberSInt32Type, &value);
+ return value;
+ }
+ }
+ return 0;
+}
+
+static unsigned short get_vendor_id(IOHIDDeviceRef device)
+{
+ return get_int_property(device, CFSTR(kIOHIDVendorIDKey));
+}
+
+static unsigned short get_product_id(IOHIDDeviceRef device)
+{
+ return get_int_property(device, CFSTR(kIOHIDProductIDKey));
+}
+
+static int32_t get_max_report_length(IOHIDDeviceRef device)
+{
+ return get_int_property(device, CFSTR(kIOHIDMaxInputReportSizeKey));
+}
+
+static int get_string_property(IOHIDDeviceRef device, CFStringRef prop, wchar_t *buf, size_t len)
+{
+ CFStringRef str;
+
+ if (!len)
+ return 0;
+
+ str = IOHIDDeviceGetProperty(device, prop);
+
+ buf[0] = 0;
+
+ if (str) {
+ CFIndex str_len = CFStringGetLength(str);
+ CFRange range;
+ CFIndex used_buf_len;
+ CFIndex chars_copied;
+
+ len --;
+
+ range.location = 0;
+ range.length = ((size_t)str_len > len)? len: (size_t)str_len;
+ chars_copied = CFStringGetBytes(str,
+ range,
+ kCFStringEncodingUTF32LE,
+ (char)'?',
+ FALSE,
+ (UInt8*)buf,
+ len * sizeof(wchar_t),
+ &used_buf_len);
+
+ if (chars_copied == len)
+ buf[len] = 0; /* len is decremented above */
+ else
+ buf[chars_copied] = 0;
+
+ return 0;
+ }
+ else
+ return -1;
+
+}
+
+static int get_serial_number(IOHIDDeviceRef device, wchar_t *buf, size_t len)
+{
+ return get_string_property(device, CFSTR(kIOHIDSerialNumberKey), buf, len);
+}
+
+static int get_manufacturer_string(IOHIDDeviceRef device, wchar_t *buf, size_t len)
+{
+ return get_string_property(device, CFSTR(kIOHIDManufacturerKey), buf, len);
+}
+
+static int get_product_string(IOHIDDeviceRef device, wchar_t *buf, size_t len)
+{
+ return get_string_property(device, CFSTR(kIOHIDProductKey), buf, len);
+}
+
+
+/* Implementation of wcsdup() for Mac. */
+static wchar_t *dup_wcs(const wchar_t *s)
+{
+ size_t len = wcslen(s);
+ wchar_t *ret = malloc((len+1)*sizeof(wchar_t));
+ wcscpy(ret, s);
+
+ return ret;
+}
+
+/* hidapi_IOHIDDeviceGetService()
+ *
+ * Return the io_service_t corresponding to a given IOHIDDeviceRef, either by:
+ * - on OS X 10.6 and above, calling IOHIDDeviceGetService()
+ * - on OS X 10.5, extract it from the IOHIDDevice struct
+ */
+static io_service_t hidapi_IOHIDDeviceGetService(IOHIDDeviceRef device)
+{
+ static void *iokit_framework = NULL;
+ static io_service_t (*dynamic_IOHIDDeviceGetService)(IOHIDDeviceRef device) = NULL;
+
+ /* Use dlopen()/dlsym() to get a pointer to IOHIDDeviceGetService() if it exists.
+ * If any of these steps fail, dynamic_IOHIDDeviceGetService will be left NULL
+ * and the fallback method will be used.
+ */
+ if (iokit_framework == NULL) {
+ iokit_framework = dlopen("/System/Library/IOKit.framework/IOKit", RTLD_LAZY);
+
+ if (iokit_framework != NULL)
+ dynamic_IOHIDDeviceGetService = dlsym(iokit_framework, "IOHIDDeviceGetService");
+ }
+
+ if (dynamic_IOHIDDeviceGetService != NULL) {
+ /* Running on OS X 10.6 and above: IOHIDDeviceGetService() exists */
+ return dynamic_IOHIDDeviceGetService(device);
+ }
+ else
+ {
+ /* Running on OS X 10.5: IOHIDDeviceGetService() doesn't exist.
+ *
+ * Be naughty and pull the service out of the IOHIDDevice.
+ * IOHIDDevice is an opaque struct not exposed to applications, but its
+ * layout is stable through all available versions of OS X.
+ * Tested and working on OS X 10.5.8 i386, x86_64, and ppc.
+ */
+ struct IOHIDDevice_internal {
+ /* The first field of the IOHIDDevice struct is a
+ * CFRuntimeBase (which is a private CF struct).
+ *
+ * a, b, and c are the 3 fields that make up a CFRuntimeBase.
+ * See http://opensource.apple.com/source/CF/CF-476.18/CFRuntime.h
+ *
+ * The second field of the IOHIDDevice is the io_service_t we're looking for.
+ */
+ uintptr_t a;
+ uint8_t b[4];
+#if __LP64__
+ uint32_t c;
+#endif
+ io_service_t service;
+ };
+ struct IOHIDDevice_internal *tmp = (struct IOHIDDevice_internal *)device;
+
+ return tmp->service;
+ }
+}
+
+/* Initialize the IOHIDManager. Return 0 for success and -1 for failure. */
+static int init_hid_manager(void)
+{
+ /* Initialize all the HID Manager Objects */
+ hid_mgr = IOHIDManagerCreate(kCFAllocatorDefault, kIOHIDOptionsTypeNone);
+ if (hid_mgr) {
+ IOHIDManagerSetDeviceMatching(hid_mgr, NULL);
+ IOHIDManagerScheduleWithRunLoop(hid_mgr, CFRunLoopGetCurrent(), kCFRunLoopDefaultMode);
+ return 0;
+ }
+
+ return -1;
+}
+
+/* Initialize the IOHIDManager if necessary. This is the public function, and
+ it is safe to call this function repeatedly. Return 0 for success and -1
+ for failure. */
+int HID_API_EXPORT hid_init(void)
+{
+ if (!hid_mgr) {
+ return init_hid_manager();
+ }
+
+ /* Already initialized. */
+ return 0;
+}
+
+int HID_API_EXPORT hid_exit(void)
+{
+ if (hid_mgr) {
+ /* Close the HID manager. */
+ IOHIDManagerClose(hid_mgr, kIOHIDOptionsTypeNone);
+ CFRelease(hid_mgr);
+ hid_mgr = NULL;
+ }
+
+ return 0;
+}
+
+static void process_pending_events(void) {
+ SInt32 res;
+ do {
+ res = CFRunLoopRunInMode(kCFRunLoopDefaultMode, 0.001, FALSE);
+ } while(res != kCFRunLoopRunFinished && res != kCFRunLoopRunTimedOut);
+}
+
+struct hid_device_info HID_API_EXPORT *hid_enumerate(unsigned short vendor_id, unsigned short product_id)
+{
+ struct hid_device_info *root = NULL; /* return object */
+ struct hid_device_info *cur_dev = NULL;
+ CFIndex num_devices;
+ int i;
+
+ /* Set up the HID Manager if it hasn't been done */
+ if (hid_init() < 0)
+ return NULL;
+
+ /* give the IOHIDManager a chance to update itself */
+ process_pending_events();
+
+ /* Get a list of the Devices */
+ IOHIDManagerSetDeviceMatching(hid_mgr, NULL);
+ CFSetRef device_set = IOHIDManagerCopyDevices(hid_mgr);
+
+ /* Convert the list into a C array so we can iterate easily. */
+ num_devices = CFSetGetCount(device_set);
+ IOHIDDeviceRef *device_array = calloc(num_devices, sizeof(IOHIDDeviceRef));
+ CFSetGetValues(device_set, (const void **) device_array);
+
+ /* Iterate over each device, making an entry for it. */
+ for (i = 0; i < num_devices; i++) {
+ unsigned short dev_vid;
+ unsigned short dev_pid;
+ #define BUF_LEN 256
+ wchar_t buf[BUF_LEN];
+
+ IOHIDDeviceRef dev = device_array[i];
+
+ if (!dev) {
+ continue;
+ }
+ dev_vid = get_vendor_id(dev);
+ dev_pid = get_product_id(dev);
+
+ /* Check the VID/PID against the arguments */
+ if ((vendor_id == 0x0 || vendor_id == dev_vid) &&
+ (product_id == 0x0 || product_id == dev_pid)) {
+ struct hid_device_info *tmp;
+ io_object_t iokit_dev;
+ kern_return_t res;
+ io_string_t path;
+
+ /* VID/PID match. Create the record. */
+ tmp = malloc(sizeof(struct hid_device_info));
+ if (cur_dev) {
+ cur_dev->next = tmp;
+ }
+ else {
+ root = tmp;
+ }
+ cur_dev = tmp;
+
+ /* Get the Usage Page and Usage for this device. */
+ cur_dev->usage_page = get_int_property(dev, CFSTR(kIOHIDPrimaryUsagePageKey));
+ cur_dev->usage = get_int_property(dev, CFSTR(kIOHIDPrimaryUsageKey));
+
+ /* Fill out the record */
+ cur_dev->next = NULL;
+
+ /* Fill in the path (IOService plane) */
+ iokit_dev = hidapi_IOHIDDeviceGetService(dev);
+ res = IORegistryEntryGetPath(iokit_dev, kIOServicePlane, path);
+ if (res == KERN_SUCCESS)
+ cur_dev->path = strdup(path);
+ else
+ cur_dev->path = strdup("");
+
+ /* Serial Number */
+ get_serial_number(dev, buf, BUF_LEN);
+ cur_dev->serial_number = dup_wcs(buf);
+
+ /* Manufacturer and Product strings */
+ get_manufacturer_string(dev, buf, BUF_LEN);
+ cur_dev->manufacturer_string = dup_wcs(buf);
+ get_product_string(dev, buf, BUF_LEN);
+ cur_dev->product_string = dup_wcs(buf);
+
+ /* VID/PID */
+ cur_dev->vendor_id = dev_vid;
+ cur_dev->product_id = dev_pid;
+
+ /* Release Number */
+ cur_dev->release_number = get_int_property(dev, CFSTR(kIOHIDVersionNumberKey));
+
+ /* Interface Number (Unsupported on Mac)*/
+ cur_dev->interface_number = -1;
+ }
+ }
+
+ free(device_array);
+ CFRelease(device_set);
+
+ return root;
+}
+
+void HID_API_EXPORT hid_free_enumeration(struct hid_device_info *devs)
+{
+ /* This function is identical to the Linux version. Platform independent. */
+ struct hid_device_info *d = devs;
+ while (d) {
+ struct hid_device_info *next = d->next;
+ free(d->path);
+ free(d->serial_number);
+ free(d->manufacturer_string);
+ free(d->product_string);
+ free(d);
+ d = next;
+ }
+}
+
+hid_device * HID_API_EXPORT hid_open(unsigned short vendor_id, unsigned short product_id, const wchar_t *serial_number)
+{
+ /* This function is identical to the Linux version. Platform independent. */
+ struct hid_device_info *devs, *cur_dev;
+ const char *path_to_open = NULL;
+ hid_device * handle = NULL;
+
+ devs = hid_enumerate(vendor_id, product_id);
+ cur_dev = devs;
+ while (cur_dev) {
+ if (cur_dev->vendor_id == vendor_id &&
+ cur_dev->product_id == product_id) {
+ if (serial_number) {
+ if (wcscmp(serial_number, cur_dev->serial_number) == 0) {
+ path_to_open = cur_dev->path;
+ break;
+ }
+ }
+ else {
+ path_to_open = cur_dev->path;
+ break;
+ }
+ }
+ cur_dev = cur_dev->next;
+ }
+
+ if (path_to_open) {
+ /* Open the device */
+ handle = hid_open_path(path_to_open);
+ }
+
+ hid_free_enumeration(devs);
+
+ return handle;
+}
+
+static void hid_device_removal_callback(void *context, IOReturn result,
+ void *sender)
+{
+ /* Stop the Run Loop for this device. */
+ hid_device *d = context;
+
+ d->disconnected = 1;
+ CFRunLoopStop(d->run_loop);
+}
+
+/* The Run Loop calls this function for each input report received.
+ This function puts the data into a linked list to be picked up by
+ hid_read(). */
+static void hid_report_callback(void *context, IOReturn result, void *sender,
+ IOHIDReportType report_type, uint32_t report_id,
+ uint8_t *report, CFIndex report_length)
+{
+ struct input_report *rpt;
+ hid_device *dev = context;
+
+ /* Make a new Input Report object */
+ rpt = calloc(1, sizeof(struct input_report));
+ rpt->data = calloc(1, report_length);
+ memcpy(rpt->data, report, report_length);
+ rpt->len = report_length;
+ rpt->next = NULL;
+
+ /* Lock this section */
+ pthread_mutex_lock(&dev->mutex);
+
+ /* Attach the new report object to the end of the list. */
+ if (dev->input_reports == NULL) {
+ /* The list is empty. Put it at the root. */
+ dev->input_reports = rpt;
+ }
+ else {
+ /* Find the end of the list and attach. */
+ struct input_report *cur = dev->input_reports;
+ int num_queued = 0;
+ while (cur->next != NULL) {
+ cur = cur->next;
+ num_queued++;
+ }
+ cur->next = rpt;
+
+ /* Pop one off if we've reached 30 in the queue. This
+ way we don't grow forever if the user never reads
+ anything from the device. */
+ if (num_queued > 30) {
+ return_data(dev, NULL, 0);
+ }
+ }
+
+ /* Signal a waiting thread that there is data. */
+ pthread_cond_signal(&dev->condition);
+
+ /* Unlock */
+ pthread_mutex_unlock(&dev->mutex);
+
+}
+
+/* This gets called when the read_thread's run loop gets signaled by
+ hid_close(), and serves to stop the read_thread's run loop. */
+static void perform_signal_callback(void *context)
+{
+ hid_device *dev = context;
+ CFRunLoopStop(dev->run_loop); /*TODO: CFRunLoopGetCurrent()*/
+}
+
+static void *read_thread(void *param)
+{
+ hid_device *dev = param;
+ SInt32 code;
+
+ /* Move the device's run loop to this thread. */
+ IOHIDDeviceScheduleWithRunLoop(dev->device_handle, CFRunLoopGetCurrent(), dev->run_loop_mode);
+
+ /* Create the RunLoopSource which is used to signal the
+ event loop to stop when hid_close() is called. */
+ CFRunLoopSourceContext ctx;
+ memset(&ctx, 0, sizeof(ctx));
+ ctx.version = 0;
+ ctx.info = dev;
+ ctx.perform = &perform_signal_callback;
+ dev->source = CFRunLoopSourceCreate(kCFAllocatorDefault, 0/*order*/, &ctx);
+ CFRunLoopAddSource(CFRunLoopGetCurrent(), dev->source, dev->run_loop_mode);
+
+ /* Store off the Run Loop so it can be stopped from hid_close()
+ and on device disconnection. */
+ dev->run_loop = CFRunLoopGetCurrent();
+
+ /* Notify the main thread that the read thread is up and running. */
+ pthread_barrier_wait(&dev->barrier);
+
+ /* Run the Event Loop. CFRunLoopRunInMode() will dispatch HID input
+ reports into the hid_report_callback(). */
+ while (!dev->shutdown_thread && !dev->disconnected) {
+ code = CFRunLoopRunInMode(dev->run_loop_mode, 1000/*sec*/, FALSE);
+ /* Return if the device has been disconnected */
+ if (code == kCFRunLoopRunFinished) {
+ dev->disconnected = 1;
+ break;
+ }
+
+
+ /* Break if The Run Loop returns Finished or Stopped. */
+ if (code != kCFRunLoopRunTimedOut &&
+ code != kCFRunLoopRunHandledSource) {
+ /* There was some kind of error. Setting
+ shutdown seems to make sense, but
+ there may be something else more appropriate */
+ dev->shutdown_thread = 1;
+ break;
+ }
+ }
+
+ /* Now that the read thread is stopping, Wake any threads which are
+ waiting on data (in hid_read_timeout()). Do this under a mutex to
+ make sure that a thread which is about to go to sleep waiting on
+ the condition actually will go to sleep before the condition is
+ signaled. */
+ pthread_mutex_lock(&dev->mutex);
+ pthread_cond_broadcast(&dev->condition);
+ pthread_mutex_unlock(&dev->mutex);
+
+ /* Wait here until hid_close() is called and makes it past
+ the call to CFRunLoopWakeUp(). This thread still needs to
+ be valid when that function is called on the other thread. */
+ pthread_barrier_wait(&dev->shutdown_barrier);
+
+ return NULL;
+}
+
+/* hid_open_path()
+ *
+ * path must be a valid path to an IOHIDDevice in the IOService plane
+ * Example: "IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/EHC1@1D,7/AppleUSBEHCI/PLAYSTATION(R)3 Controller@fd120000/IOUSBInterface@0/IOUSBHIDDriver"
+ */
+hid_device * HID_API_EXPORT hid_open_path(const char *path)
+{
+ hid_device *dev = NULL;
+ io_registry_entry_t entry = MACH_PORT_NULL;
+
+ dev = new_hid_device();
+
+ /* Set up the HID Manager if it hasn't been done */
+ if (hid_init() < 0)
+ return NULL;
+
+ /* Get the IORegistry entry for the given path */
+ entry = IORegistryEntryFromPath(kIOMasterPortDefault, path);
+ if (entry == MACH_PORT_NULL) {
+ /* Path wasn't valid (maybe device was removed?) */
+ goto return_error;
+ }
+
+ /* Create an IOHIDDevice for the entry */
+ dev->device_handle = IOHIDDeviceCreate(kCFAllocatorDefault, entry);
+ if (dev->device_handle == NULL) {
+ /* Error creating the HID device */
+ goto return_error;
+ }
+
+ /* Open the IOHIDDevice */
+ IOReturn ret = IOHIDDeviceOpen(dev->device_handle, kIOHIDOptionsTypeSeizeDevice);
+ if (ret == kIOReturnSuccess) {
+ char str[32];
+
+ /* Create the buffers for receiving data */
+ dev->max_input_report_len = (CFIndex) get_max_report_length(dev->device_handle);
+ dev->input_report_buf = calloc(dev->max_input_report_len, sizeof(uint8_t));
+
+ /* Create the Run Loop Mode for this device.
+ printing the reference seems to work. */
+ sprintf(str, "HIDAPI_%p", dev->device_handle);
+ dev->run_loop_mode =
+ CFStringCreateWithCString(NULL, str, kCFStringEncodingASCII);
+
+ /* Attach the device to a Run Loop */
+ IOHIDDeviceRegisterInputReportCallback(
+ dev->device_handle, dev->input_report_buf, dev->max_input_report_len,
+ &hid_report_callback, dev);
+ IOHIDDeviceRegisterRemovalCallback(dev->device_handle, hid_device_removal_callback, dev);
+
+ /* Start the read thread */
+ pthread_create(&dev->thread, NULL, read_thread, dev);
+
+ /* Wait here for the read thread to be initialized. */
+ pthread_barrier_wait(&dev->barrier);
+
+ IOObjectRelease(entry);
+ return dev;
+ }
+ else {
+ goto return_error;
+ }
+
+return_error:
+ if (dev->device_handle != NULL)
+ CFRelease(dev->device_handle);
+
+ if (entry != MACH_PORT_NULL)
+ IOObjectRelease(entry);
+
+ free_hid_device(dev);
+ return NULL;
+}
+
+static int set_report(hid_device *dev, IOHIDReportType type, const unsigned char *data, size_t length)
+{
+ const unsigned char *data_to_send;
+ size_t length_to_send;
+ IOReturn res;
+
+ /* Return if the device has been disconnected. */
+ if (dev->disconnected)
+ return -1;
+
+ if (data[0] == 0x0) {
+ /* Not using numbered Reports.
+ Don't send the report number. */
+ data_to_send = data+1;
+ length_to_send = length-1;
+ }
+ else {
+ /* Using numbered Reports.
+ Send the Report Number */
+ data_to_send = data;
+ length_to_send = length;
+ }
+
+ if (!dev->disconnected) {
+ res = IOHIDDeviceSetReport(dev->device_handle,
+ type,
+ data[0], /* Report ID*/
+ data_to_send, length_to_send);
+
+ if (res == kIOReturnSuccess) {
+ return length;
+ }
+ else
+ return -1;
+ }
+
+ return -1;
+}
+
+int HID_API_EXPORT hid_write(hid_device *dev, const unsigned char *data, size_t length)
+{
+ return set_report(dev, kIOHIDReportTypeOutput, data, length);
+}
+
+/* Helper function, so that this isn't duplicated in hid_read(). */
+static int return_data(hid_device *dev, unsigned char *data, size_t length)
+{
+ /* Copy the data out of the linked list item (rpt) into the
+ return buffer (data), and delete the liked list item. */
+ struct input_report *rpt = dev->input_reports;
+ size_t len = (length < rpt->len)? length: rpt->len;
+ memcpy(data, rpt->data, len);
+ dev->input_reports = rpt->next;
+ free(rpt->data);
+ free(rpt);
+ return len;
+}
+
+static int cond_wait(const hid_device *dev, pthread_cond_t *cond, pthread_mutex_t *mutex)
+{
+ while (!dev->input_reports) {
+ int res = pthread_cond_wait(cond, mutex);
+ if (res != 0)
+ return res;
+
+ /* A res of 0 means we may have been signaled or it may
+ be a spurious wakeup. Check to see that there's acutally
+ data in the queue before returning, and if not, go back
+ to sleep. See the pthread_cond_timedwait() man page for
+ details. */
+
+ if (dev->shutdown_thread || dev->disconnected)
+ return -1;
+ }
+
+ return 0;
+}
+
+static int cond_timedwait(const hid_device *dev, pthread_cond_t *cond, pthread_mutex_t *mutex, const struct timespec *abstime)
+{
+ while (!dev->input_reports) {
+ int res = pthread_cond_timedwait(cond, mutex, abstime);
+ if (res != 0)
+ return res;
+
+ /* A res of 0 means we may have been signaled or it may
+ be a spurious wakeup. Check to see that there's acutally
+ data in the queue before returning, and if not, go back
+ to sleep. See the pthread_cond_timedwait() man page for
+ details. */
+
+ if (dev->shutdown_thread || dev->disconnected)
+ return -1;
+ }
+
+ return 0;
+
+}
+
+int HID_API_EXPORT hid_read_timeout(hid_device *dev, unsigned char *data, size_t length, int milliseconds)
+{
+ int bytes_read = -1;
+
+ /* Lock the access to the report list. */
+ pthread_mutex_lock(&dev->mutex);
+
+ /* There's an input report queued up. Return it. */
+ if (dev->input_reports) {
+ /* Return the first one */
+ bytes_read = return_data(dev, data, length);
+ goto ret;
+ }
+
+ /* Return if the device has been disconnected. */
+ if (dev->disconnected) {
+ bytes_read = -1;
+ goto ret;
+ }
+
+ if (dev->shutdown_thread) {
+ /* This means the device has been closed (or there
+ has been an error. An error code of -1 should
+ be returned. */
+ bytes_read = -1;
+ goto ret;
+ }
+
+ /* There is no data. Go to sleep and wait for data. */
+
+ if (milliseconds == -1) {
+ /* Blocking */
+ int res;
+ res = cond_wait(dev, &dev->condition, &dev->mutex);
+ if (res == 0)
+ bytes_read = return_data(dev, data, length);
+ else {
+ /* There was an error, or a device disconnection. */
+ bytes_read = -1;
+ }
+ }
+ else if (milliseconds > 0) {
+ /* Non-blocking, but called with timeout. */
+ int res;
+ struct timespec ts;
+ struct timeval tv;
+ gettimeofday(&tv, NULL);
+ TIMEVAL_TO_TIMESPEC(&tv, &ts);
+ ts.tv_sec += milliseconds / 1000;
+ ts.tv_nsec += (milliseconds % 1000) * 1000000;
+ if (ts.tv_nsec >= 1000000000L) {
+ ts.tv_sec++;
+ ts.tv_nsec -= 1000000000L;
+ }
+
+ res = cond_timedwait(dev, &dev->condition, &dev->mutex, &ts);
+ if (res == 0)
+ bytes_read = return_data(dev, data, length);
+ else if (res == ETIMEDOUT)
+ bytes_read = 0;
+ else
+ bytes_read = -1;
+ }
+ else {
+ /* Purely non-blocking */
+ bytes_read = 0;
+ }
+
+ret:
+ /* Unlock */
+ pthread_mutex_unlock(&dev->mutex);
+ return bytes_read;
+}
+
+int HID_API_EXPORT hid_read(hid_device *dev, unsigned char *data, size_t length)
+{
+ return hid_read_timeout(dev, data, length, (dev->blocking)? -1: 0);
+}
+
+int HID_API_EXPORT hid_set_nonblocking(hid_device *dev, int nonblock)
+{
+ /* All Nonblocking operation is handled by the library. */
+ dev->blocking = !nonblock;
+
+ return 0;
+}
+
+int HID_API_EXPORT hid_send_feature_report(hid_device *dev, const unsigned char *data, size_t length)
+{
+ return set_report(dev, kIOHIDReportTypeFeature, data, length);
+}
+
+int HID_API_EXPORT hid_get_feature_report(hid_device *dev, unsigned char *data, size_t length)
+{
+ CFIndex len = length;
+ IOReturn res;
+
+ /* Return if the device has been unplugged. */
+ if (dev->disconnected)
+ return -1;
+
+ res = IOHIDDeviceGetReport(dev->device_handle,
+ kIOHIDReportTypeFeature,
+ data[0], /* Report ID */
+ data, &len);
+ if (res == kIOReturnSuccess)
+ return len;
+ else
+ return -1;
+}
+
+
+void HID_API_EXPORT hid_close(hid_device *dev)
+{
+ if (!dev)
+ return;
+
+ /* Disconnect the report callback before close. */
+ if (!dev->disconnected) {
+ IOHIDDeviceRegisterInputReportCallback(
+ dev->device_handle, dev->input_report_buf, dev->max_input_report_len,
+ NULL, dev);
+ IOHIDDeviceRegisterRemovalCallback(dev->device_handle, NULL, dev);
+ IOHIDDeviceUnscheduleFromRunLoop(dev->device_handle, dev->run_loop, dev->run_loop_mode);
+ IOHIDDeviceScheduleWithRunLoop(dev->device_handle, CFRunLoopGetMain(), kCFRunLoopDefaultMode);
+ }
+
+ /* Cause read_thread() to stop. */
+ dev->shutdown_thread = 1;
+
+ /* Wake up the run thread's event loop so that the thread can exit. */
+ CFRunLoopSourceSignal(dev->source);
+ CFRunLoopWakeUp(dev->run_loop);
+
+ /* Notify the read thread that it can shut down now. */
+ pthread_barrier_wait(&dev->shutdown_barrier);
+
+ /* Wait for read_thread() to end. */
+ pthread_join(dev->thread, NULL);
+
+ /* Close the OS handle to the device, but only if it's not
+ been unplugged. If it's been unplugged, then calling
+ IOHIDDeviceClose() will crash. */
+ if (!dev->disconnected) {
+ IOHIDDeviceClose(dev->device_handle, kIOHIDOptionsTypeSeizeDevice);
+ }
+
+ /* Clear out the queue of received reports. */
+ pthread_mutex_lock(&dev->mutex);
+ while (dev->input_reports) {
+ return_data(dev, NULL, 0);
+ }
+ pthread_mutex_unlock(&dev->mutex);
+ CFRelease(dev->device_handle);
+
+ free_hid_device(dev);
+}
+
+int HID_API_EXPORT_CALL hid_get_manufacturer_string(hid_device *dev, wchar_t *string, size_t maxlen)
+{
+ return get_manufacturer_string(dev->device_handle, string, maxlen);
+}
+
+int HID_API_EXPORT_CALL hid_get_product_string(hid_device *dev, wchar_t *string, size_t maxlen)
+{
+ return get_product_string(dev->device_handle, string, maxlen);
+}
+
+int HID_API_EXPORT_CALL hid_get_serial_number_string(hid_device *dev, wchar_t *string, size_t maxlen)
+{
+ return get_serial_number(dev->device_handle, string, maxlen);
+}
+
+int HID_API_EXPORT_CALL hid_get_indexed_string(hid_device *dev, int string_index, wchar_t *string, size_t maxlen)
+{
+ /* TODO: */
+
+ return 0;
+}
+
+
+HID_API_EXPORT const wchar_t * HID_API_CALL hid_error(hid_device *dev)
+{
+ /* TODO: */
+
+ return NULL;
+}
+
+
+
+
+
+
+
+#if 0
+static int32_t get_location_id(IOHIDDeviceRef device)
+{
+ return get_int_property(device, CFSTR(kIOHIDLocationIDKey));
+}
+
+static int32_t get_usage(IOHIDDeviceRef device)
+{
+ int32_t res;
+ res = get_int_property(device, CFSTR(kIOHIDDeviceUsageKey));
+ if (!res)
+ res = get_int_property(device, CFSTR(kIOHIDPrimaryUsageKey));
+ return res;
+}
+
+static int32_t get_usage_page(IOHIDDeviceRef device)
+{
+ int32_t res;
+ res = get_int_property(device, CFSTR(kIOHIDDeviceUsagePageKey));
+ if (!res)
+ res = get_int_property(device, CFSTR(kIOHIDPrimaryUsagePageKey));
+ return res;
+}
+
+static int get_transport(IOHIDDeviceRef device, wchar_t *buf, size_t len)
+{
+ return get_string_property(device, CFSTR(kIOHIDTransportKey), buf, len);
+}
+
+
+int main(void)
+{
+ IOHIDManagerRef mgr;
+ int i;
+
+ mgr = IOHIDManagerCreate(kCFAllocatorDefault, kIOHIDOptionsTypeNone);
+ IOHIDManagerSetDeviceMatching(mgr, NULL);
+ IOHIDManagerOpen(mgr, kIOHIDOptionsTypeNone);
+
+ CFSetRef device_set = IOHIDManagerCopyDevices(mgr);
+
+ CFIndex num_devices = CFSetGetCount(device_set);
+ IOHIDDeviceRef *device_array = calloc(num_devices, sizeof(IOHIDDeviceRef));
+ CFSetGetValues(device_set, (const void **) device_array);
+
+ for (i = 0; i < num_devices; i++) {
+ IOHIDDeviceRef dev = device_array[i];
+ printf("Device: %p\n", dev);
+ printf(" %04hx %04hx\n", get_vendor_id(dev), get_product_id(dev));
+
+ wchar_t serial[256], buf[256];
+ char cbuf[256];
+ get_serial_number(dev, serial, 256);
+
+
+ printf(" Serial: %ls\n", serial);
+ printf(" Loc: %ld\n", get_location_id(dev));
+ get_transport(dev, buf, 256);
+ printf(" Trans: %ls\n", buf);
+ make_path(dev, cbuf, 256);
+ printf(" Path: %s\n", cbuf);
+
+ }
+
+ return 0;
+}
+#endif
diff --git a/vendor/github.com/karalabe/hid/hidapi/windows/hid.c b/vendor/github.com/karalabe/hid/hidapi/windows/hid.c
new file mode 100755
index 0000000..86810d7
--- /dev/null
+++ b/vendor/github.com/karalabe/hid/hidapi/windows/hid.c
@@ -0,0 +1,944 @@
+/*******************************************************
+ HIDAPI - Multi-Platform library for
+ communication with HID devices.
+
+ Alan Ott
+ Signal 11 Software
+
+ 8/22/2009
+
+ Copyright 2009, All Rights Reserved.
+
+ At the discretion of the user of this library,
+ this software may be licensed under the terms of the
+ GNU General Public License v3, a BSD-Style license, or the
+ original HIDAPI license as outlined in the LICENSE.txt,
+ LICENSE-gpl3.txt, LICENSE-bsd.txt, and LICENSE-orig.txt
+ files located at the root of the source distribution.
+ These files may also be found in the public source
+ code repository located at:
+ http://github.com/signal11/hidapi .
+********************************************************/
+
+#include <windows.h>
+
+#ifndef _NTDEF_
+typedef LONG NTSTATUS;
+#endif
+
+#ifdef __MINGW32__
+#include <ntdef.h>
+#include <winbase.h>
+#endif
+
+#ifdef __CYGWIN__
+#include <ntdef.h>
+#define _wcsdup wcsdup
+#endif
+
+/* The maximum number of characters that can be passed into the
+ HidD_Get*String() functions without it failing.*/
+#define MAX_STRING_WCHARS 0xFFF
+
+/*#define HIDAPI_USE_DDK*/
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ #include <setupapi.h>
+ #include <winioctl.h>
+ #ifdef HIDAPI_USE_DDK
+ #include <hidsdi.h>
+ #endif
+
+ /* Copied from inc/ddk/hidclass.h, part of the Windows DDK. */
+ #define HID_OUT_CTL_CODE(id) \
+ CTL_CODE(FILE_DEVICE_KEYBOARD, (id), METHOD_OUT_DIRECT, FILE_ANY_ACCESS)
+ #define IOCTL_HID_GET_FEATURE HID_OUT_CTL_CODE(100)
+
+#ifdef __cplusplus
+} /* extern "C" */
+#endif
+
+#include <stdio.h>
+#include <stdlib.h>
+
+
+#include "hidapi.h"
+
+#undef MIN
+#define MIN(x,y) ((x) < (y)? (x): (y))
+
+#ifdef _MSC_VER
+ /* Thanks Microsoft, but I know how to use strncpy(). */
+ #pragma warning(disable:4996)
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef HIDAPI_USE_DDK
+ /* Since we're not building with the DDK, and the HID header
+ files aren't part of the SDK, we have to define all this
+ stuff here. In lookup_functions(), the function pointers
+ defined below are set. */
+ typedef struct _HIDD_ATTRIBUTES{
+ ULONG Size;
+ USHORT VendorID;
+ USHORT ProductID;
+ USHORT VersionNumber;
+ } HIDD_ATTRIBUTES, *PHIDD_ATTRIBUTES;
+
+ typedef USHORT USAGE;
+ typedef struct _HIDP_CAPS {
+ USAGE Usage;
+ USAGE UsagePage;
+ USHORT InputReportByteLength;
+ USHORT OutputReportByteLength;
+ USHORT FeatureReportByteLength;
+ USHORT Reserved[17];
+ USHORT fields_not_used_by_hidapi[10];
+ } HIDP_CAPS, *PHIDP_CAPS;
+ typedef void* PHIDP_PREPARSED_DATA;
+ #define HIDP_STATUS_SUCCESS 0x110000
+
+ typedef BOOLEAN (__stdcall *HidD_GetAttributes_)(HANDLE device, PHIDD_ATTRIBUTES attrib);
+ typedef BOOLEAN (__stdcall *HidD_GetSerialNumberString_)(HANDLE device, PVOID buffer, ULONG buffer_len);
+ typedef BOOLEAN (__stdcall *HidD_GetManufacturerString_)(HANDLE handle, PVOID buffer, ULONG buffer_len);
+ typedef BOOLEAN (__stdcall *HidD_GetProductString_)(HANDLE handle, PVOID buffer, ULONG buffer_len);
+ typedef BOOLEAN (__stdcall *HidD_SetFeature_)(HANDLE handle, PVOID data, ULONG length);
+ typedef BOOLEAN (__stdcall *HidD_GetFeature_)(HANDLE handle, PVOID data, ULONG length);
+ typedef BOOLEAN (__stdcall *HidD_GetIndexedString_)(HANDLE handle, ULONG string_index, PVOID buffer, ULONG buffer_len);
+ typedef BOOLEAN (__stdcall *HidD_GetPreparsedData_)(HANDLE handle, PHIDP_PREPARSED_DATA *preparsed_data);
+ typedef BOOLEAN (__stdcall *HidD_FreePreparsedData_)(PHIDP_PREPARSED_DATA preparsed_data);
+ typedef NTSTATUS (__stdcall *HidP_GetCaps_)(PHIDP_PREPARSED_DATA preparsed_data, HIDP_CAPS *caps);
+ typedef BOOLEAN (__stdcall *HidD_SetNumInputBuffers_)(HANDLE handle, ULONG number_buffers);
+
+ static HidD_GetAttributes_ HidD_GetAttributes;
+ static HidD_GetSerialNumberString_ HidD_GetSerialNumberString;
+ static HidD_GetManufacturerString_ HidD_GetManufacturerString;
+ static HidD_GetProductString_ HidD_GetProductString;
+ static HidD_SetFeature_ HidD_SetFeature;
+ static HidD_GetFeature_ HidD_GetFeature;
+ static HidD_GetIndexedString_ HidD_GetIndexedString;
+ static HidD_GetPreparsedData_ HidD_GetPreparsedData;
+ static HidD_FreePreparsedData_ HidD_FreePreparsedData;
+ static HidP_GetCaps_ HidP_GetCaps;
+ static HidD_SetNumInputBuffers_ HidD_SetNumInputBuffers;
+
+ static HMODULE lib_handle = NULL;
+ static BOOLEAN initialized = FALSE;
+#endif /* HIDAPI_USE_DDK */
+
+struct hid_device_ {
+ HANDLE device_handle;
+ BOOL blocking;
+ USHORT output_report_length;
+ size_t input_report_length;
+ void *last_error_str;
+ DWORD last_error_num;
+ BOOL read_pending;
+ char *read_buf;
+ OVERLAPPED ol;
+};
+
+static hid_device *new_hid_device()
+{
+ hid_device *dev = (hid_device*) calloc(1, sizeof(hid_device));
+ dev->device_handle = INVALID_HANDLE_VALUE;
+ dev->blocking = TRUE;
+ dev->output_report_length = 0;
+ dev->input_report_length = 0;
+ dev->last_error_str = NULL;
+ dev->last_error_num = 0;
+ dev->read_pending = FALSE;
+ dev->read_buf = NULL;
+ memset(&dev->ol, 0, sizeof(dev->ol));
+ dev->ol.hEvent = CreateEvent(NULL, FALSE, FALSE /*initial state f=nonsignaled*/, NULL);
+
+ return dev;
+}
+
+static void free_hid_device(hid_device *dev)
+{
+ CloseHandle(dev->ol.hEvent);
+ CloseHandle(dev->device_handle);
+ LocalFree(dev->last_error_str);
+ free(dev->read_buf);
+ free(dev);
+}
+
+static void register_error(hid_device *device, const char *op)
+{
+ WCHAR *ptr, *msg;
+
+ FormatMessageW(FORMAT_MESSAGE_ALLOCATE_BUFFER |
+ FORMAT_MESSAGE_FROM_SYSTEM |
+ FORMAT_MESSAGE_IGNORE_INSERTS,
+ NULL,
+ GetLastError(),
+ MAKELANGID(LANG_NEUTRAL, SUBLANG_DEFAULT),
+ (LPVOID)&msg, 0/*sz*/,
+ NULL);
+
+ /* Get rid of the CR and LF that FormatMessage() sticks at the
+ end of the message. Thanks Microsoft! */
+ ptr = msg;
+ while (*ptr) {
+ if (*ptr == '\r') {
+ *ptr = 0x0000;
+ break;
+ }
+ ptr++;
+ }
+
+ /* Store the message off in the Device entry so that
+ the hid_error() function can pick it up. */
+ LocalFree(device->last_error_str);
+ device->last_error_str = msg;
+}
+
+#ifndef HIDAPI_USE_DDK
+static int lookup_functions()
+{
+ lib_handle = LoadLibraryA("hid.dll");
+ if (lib_handle) {
+#define RESOLVE(x) x = (x##_)GetProcAddress(lib_handle, #x); if (!x) return -1;
+ RESOLVE(HidD_GetAttributes);
+ RESOLVE(HidD_GetSerialNumberString);
+ RESOLVE(HidD_GetManufacturerString);
+ RESOLVE(HidD_GetProductString);
+ RESOLVE(HidD_SetFeature);
+ RESOLVE(HidD_GetFeature);
+ RESOLVE(HidD_GetIndexedString);
+ RESOLVE(HidD_GetPreparsedData);
+ RESOLVE(HidD_FreePreparsedData);
+ RESOLVE(HidP_GetCaps);
+ RESOLVE(HidD_SetNumInputBuffers);
+#undef RESOLVE
+ }
+ else
+ return -1;
+
+ return 0;
+}
+#endif
+
+static HANDLE open_device(const char *path, BOOL enumerate)
+{
+ HANDLE handle;
+ DWORD desired_access = (enumerate)? 0: (GENERIC_WRITE | GENERIC_READ);
+ DWORD share_mode = FILE_SHARE_READ|FILE_SHARE_WRITE;
+
+ handle = CreateFileA(path,
+ desired_access,
+ share_mode,
+ NULL,
+ OPEN_EXISTING,
+ FILE_FLAG_OVERLAPPED,/*FILE_ATTRIBUTE_NORMAL,*/
+ 0);
+
+ return handle;
+}
+
+int HID_API_EXPORT hid_init(void)
+{
+#ifndef HIDAPI_USE_DDK
+ if (!initialized) {
+ if (lookup_functions() < 0) {
+ hid_exit();
+ return -1;
+ }
+ initialized = TRUE;
+ }
+#endif
+ return 0;
+}
+
+int HID_API_EXPORT hid_exit(void)
+{
+#ifndef HIDAPI_USE_DDK
+ if (lib_handle)
+ FreeLibrary(lib_handle);
+ lib_handle = NULL;
+ initialized = FALSE;
+#endif
+ return 0;
+}
+
+struct hid_device_info HID_API_EXPORT * HID_API_CALL hid_enumerate(unsigned short vendor_id, unsigned short product_id)
+{
+ BOOL res;
+ struct hid_device_info *root = NULL; /* return object */
+ struct hid_device_info *cur_dev = NULL;
+
+ /* Windows objects for interacting with the driver. */
+ GUID InterfaceClassGuid = {0x4d1e55b2, 0xf16f, 0x11cf, {0x88, 0xcb, 0x00, 0x11, 0x11, 0x00, 0x00, 0x30} };
+ SP_DEVINFO_DATA devinfo_data;
+ SP_DEVICE_INTERFACE_DATA device_interface_data;
+ SP_DEVICE_INTERFACE_DETAIL_DATA_A *device_interface_detail_data = NULL;
+ HDEVINFO device_info_set = INVALID_HANDLE_VALUE;
+ int device_index = 0;
+ int i;
+
+ if (hid_init() < 0)
+ return NULL;
+
+ /* Initialize the Windows objects. */
+ memset(&devinfo_data, 0x0, sizeof(devinfo_data));
+ devinfo_data.cbSize = sizeof(SP_DEVINFO_DATA);
+ device_interface_data.cbSize = sizeof(SP_DEVICE_INTERFACE_DATA);
+
+ /* Get information for all the devices belonging to the HID class. */
+ device_info_set = SetupDiGetClassDevsA(&InterfaceClassGuid, NULL, NULL, DIGCF_PRESENT | DIGCF_DEVICEINTERFACE);
+
+ /* Iterate over each device in the HID class, looking for the right one. */
+
+ for (;;) {
+ HANDLE write_handle = INVALID_HANDLE_VALUE;
+ DWORD required_size = 0;
+ HIDD_ATTRIBUTES attrib;
+
+ res = SetupDiEnumDeviceInterfaces(device_info_set,
+ NULL,
+ &InterfaceClassGuid,
+ device_index,
+ &device_interface_data);
+
+ if (!res) {
+ /* A return of FALSE from this function means that
+ there are no more devices. */
+ break;
+ }
+
+ /* Call with 0-sized detail size, and let the function
+ tell us how long the detail struct needs to be. The
+ size is put in &required_size. */
+ res = SetupDiGetDeviceInterfaceDetailA(device_info_set,
+ &device_interface_data,
+ NULL,
+ 0,
+ &required_size,
+ NULL);
+
+ /* Allocate a long enough structure for device_interface_detail_data. */
+ device_interface_detail_data = (SP_DEVICE_INTERFACE_DETAIL_DATA_A*) malloc(required_size);
+ device_interface_detail_data->cbSize = sizeof(SP_DEVICE_INTERFACE_DETAIL_DATA_A);
+
+ /* Get the detailed data for this device. The detail data gives us
+ the device path for this device, which is then passed into
+ CreateFile() to get a handle to the device. */
+ res = SetupDiGetDeviceInterfaceDetailA(device_info_set,
+ &device_interface_data,
+ device_interface_detail_data,
+ required_size,
+ NULL,
+ NULL);
+
+ if (!res) {
+ /* register_error(dev, "Unable to call SetupDiGetDeviceInterfaceDetail");
+ Continue to the next device. */
+ goto cont;
+ }
+
+ /* Make sure this device is of Setup Class "HIDClass" and has a
+ driver bound to it. */
+ for (i = 0; ; i++) {
+ char driver_name[256];
+
+ /* Populate devinfo_data. This function will return failure
+ when there are no more interfaces left. */
+ res = SetupDiEnumDeviceInfo(device_info_set, i, &devinfo_data);
+ if (!res)
+ goto cont;
+
+ res = SetupDiGetDeviceRegistryPropertyA(device_info_set, &devinfo_data,
+ SPDRP_CLASS, NULL, (PBYTE)driver_name, sizeof(driver_name), NULL);
+ if (!res)
+ goto cont;
+
+ if (strcmp(driver_name, "HIDClass") == 0) {
+ /* See if there's a driver bound. */
+ res = SetupDiGetDeviceRegistryPropertyA(device_info_set, &devinfo_data,
+ SPDRP_DRIVER, NULL, (PBYTE)driver_name, sizeof(driver_name), NULL);
+ if (res)
+ break;
+ }
+ }
+
+ //wprintf(L"HandleName: %s\n", device_interface_detail_data->DevicePath);
+
+ /* Open a handle to the device */
+ write_handle = open_device(device_interface_detail_data->DevicePath, TRUE);
+
+ /* Check validity of write_handle. */
+ if (write_handle == INVALID_HANDLE_VALUE) {
+ /* Unable to open the device. */
+ //register_error(dev, "CreateFile");
+ goto cont_close;
+ }
+
+
+ /* Get the Vendor ID and Product ID for this device. */
+ attrib.Size = sizeof(HIDD_ATTRIBUTES);
+ HidD_GetAttributes(write_handle, &attrib);
+ //wprintf(L"Product/Vendor: %x %x\n", attrib.ProductID, attrib.VendorID);
+
+ /* Check the VID/PID to see if we should add this
+ device to the enumeration list. */
+ if ((vendor_id == 0x0 || attrib.VendorID == vendor_id) &&
+ (product_id == 0x0 || attrib.ProductID == product_id)) {
+
+ #define WSTR_LEN 512
+ const char *str;
+ struct hid_device_info *tmp;
+ PHIDP_PREPARSED_DATA pp_data = NULL;
+ HIDP_CAPS caps;
+ BOOLEAN res;
+ NTSTATUS nt_res;
+ wchar_t wstr[WSTR_LEN]; /* TODO: Determine Size */
+ size_t len;
+
+ /* VID/PID match. Create the record. */
+ tmp = (struct hid_device_info*) calloc(1, sizeof(struct hid_device_info));
+ if (cur_dev) {
+ cur_dev->next = tmp;
+ }
+ else {
+ root = tmp;
+ }
+ cur_dev = tmp;
+
+ /* Get the Usage Page and Usage for this device. */
+ res = HidD_GetPreparsedData(write_handle, &pp_data);
+ if (res) {
+ nt_res = HidP_GetCaps(pp_data, &caps);
+ if (nt_res == HIDP_STATUS_SUCCESS) {
+ cur_dev->usage_page = caps.UsagePage;
+ cur_dev->usage = caps.Usage;
+ }
+
+ HidD_FreePreparsedData(pp_data);
+ }
+
+ /* Fill out the record */
+ cur_dev->next = NULL;
+ str = device_interface_detail_data->DevicePath;
+ if (str) {
+ len = strlen(str);
+ cur_dev->path = (char*) calloc(len+1, sizeof(char));
+ strncpy(cur_dev->path, str, len+1);
+ cur_dev->path[len] = '\0';
+ }
+ else
+ cur_dev->path = NULL;
+
+ /* Serial Number */
+ res = HidD_GetSerialNumberString(write_handle, wstr, sizeof(wstr));
+ wstr[WSTR_LEN-1] = 0x0000;
+ if (res) {
+ cur_dev->serial_number = _wcsdup(wstr);
+ }
+
+ /* Manufacturer String */
+ res = HidD_GetManufacturerString(write_handle, wstr, sizeof(wstr));
+ wstr[WSTR_LEN-1] = 0x0000;
+ if (res) {
+ cur_dev->manufacturer_string = _wcsdup(wstr);
+ }
+
+ /* Product String */
+ res = HidD_GetProductString(write_handle, wstr, sizeof(wstr));
+ wstr[WSTR_LEN-1] = 0x0000;
+ if (res) {
+ cur_dev->product_string = _wcsdup(wstr);
+ }
+
+ /* VID/PID */
+ cur_dev->vendor_id = attrib.VendorID;
+ cur_dev->product_id = attrib.ProductID;
+
+ /* Release Number */
+ cur_dev->release_number = attrib.VersionNumber;
+
+ /* Interface Number. It can sometimes be parsed out of the path
+ on Windows if a device has multiple interfaces. See
+ http://msdn.microsoft.com/en-us/windows/hardware/gg487473 or
+ search for "Hardware IDs for HID Devices" at MSDN. If it's not
+ in the path, it's set to -1. */
+ cur_dev->interface_number = -1;
+ if (cur_dev->path) {
+ char *interface_component = strstr(cur_dev->path, "&mi_");
+ if (interface_component) {
+ char *hex_str = interface_component + 4;
+ char *endptr = NULL;
+ cur_dev->interface_number = strtol(hex_str, &endptr, 16);
+ if (endptr == hex_str) {
+ /* The parsing failed. Set interface_number to -1. */
+ cur_dev->interface_number = -1;
+ }
+ }
+ }
+ }
+
+cont_close:
+ CloseHandle(write_handle);
+cont:
+ /* We no longer need the detail data. It can be freed */
+ free(device_interface_detail_data);
+
+ device_index++;
+
+ }
+
+ /* Close the device information handle. */
+ SetupDiDestroyDeviceInfoList(device_info_set);
+
+ return root;
+
+}
+
+void HID_API_EXPORT HID_API_CALL hid_free_enumeration(struct hid_device_info *devs)
+{
+ /* TODO: Merge this with the Linux version. This function is platform-independent. */
+ struct hid_device_info *d = devs;
+ while (d) {
+ struct hid_device_info *next = d->next;
+ free(d->path);
+ free(d->serial_number);
+ free(d->manufacturer_string);
+ free(d->product_string);
+ free(d);
+ d = next;
+ }
+}
+
+
+HID_API_EXPORT hid_device * HID_API_CALL hid_open(unsigned short vendor_id, unsigned short product_id, const wchar_t *serial_number)
+{
+ /* TODO: Merge this functions with the Linux version. This function should be platform independent. */
+ struct hid_device_info *devs, *cur_dev;
+ const char *path_to_open = NULL;
+ hid_device *handle = NULL;
+
+ devs = hid_enumerate(vendor_id, product_id);
+ cur_dev = devs;
+ while (cur_dev) {
+ if (cur_dev->vendor_id == vendor_id &&
+ cur_dev->product_id == product_id) {
+ if (serial_number) {
+ if (wcscmp(serial_number, cur_dev->serial_number) == 0) {
+ path_to_open = cur_dev->path;
+ break;
+ }
+ }
+ else {
+ path_to_open = cur_dev->path;
+ break;
+ }
+ }
+ cur_dev = cur_dev->next;
+ }
+
+ if (path_to_open) {
+ /* Open the device */
+ handle = hid_open_path(path_to_open);
+ }
+
+ hid_free_enumeration(devs);
+
+ return handle;
+}
+
+HID_API_EXPORT hid_device * HID_API_CALL hid_open_path(const char *path)
+{
+ hid_device *dev;
+ HIDP_CAPS caps;
+ PHIDP_PREPARSED_DATA pp_data = NULL;
+ BOOLEAN res;
+ NTSTATUS nt_res;
+
+ if (hid_init() < 0) {
+ return NULL;
+ }
+
+ dev = new_hid_device();
+
+ /* Open a handle to the device */
+ dev->device_handle = open_device(path, FALSE);
+
+ /* Check validity of write_handle. */
+ if (dev->device_handle == INVALID_HANDLE_VALUE) {
+ /* Unable to open the device. */
+ register_error(dev, "CreateFile");
+ goto err;
+ }
+
+ /* Set the Input Report buffer size to 64 reports. */
+ res = HidD_SetNumInputBuffers(dev->device_handle, 64);
+ if (!res) {
+ register_error(dev, "HidD_SetNumInputBuffers");
+ goto err;
+ }
+
+ /* Get the Input Report length for the device. */
+ res = HidD_GetPreparsedData(dev->device_handle, &pp_data);
+ if (!res) {
+ register_error(dev, "HidD_GetPreparsedData");
+ goto err;
+ }
+ nt_res = HidP_GetCaps(pp_data, &caps);
+ if (nt_res != HIDP_STATUS_SUCCESS) {
+ register_error(dev, "HidP_GetCaps");
+ goto err_pp_data;
+ }
+ dev->output_report_length = caps.OutputReportByteLength;
+ dev->input_report_length = caps.InputReportByteLength;
+ HidD_FreePreparsedData(pp_data);
+
+ dev->read_buf = (char*) malloc(dev->input_report_length);
+
+ return dev;
+
+err_pp_data:
+ HidD_FreePreparsedData(pp_data);
+err:
+ free_hid_device(dev);
+ return NULL;
+}
+
+int HID_API_EXPORT HID_API_CALL hid_write(hid_device *dev, const unsigned char *data, size_t length)
+{
+ DWORD bytes_written;
+ BOOL res;
+
+ OVERLAPPED ol;
+ unsigned char *buf;
+ memset(&ol, 0, sizeof(ol));
+
+ /* Make sure the right number of bytes are passed to WriteFile. Windows
+ expects the number of bytes which are in the _longest_ report (plus
+ one for the report number) bytes even if the data is a report
+ which is shorter than that. Windows gives us this value in
+ caps.OutputReportByteLength. If a user passes in fewer bytes than this,
+ create a temporary buffer which is the proper size. */
+ if (length >= dev->output_report_length) {
+ /* The user passed the right number of bytes. Use the buffer as-is. */
+ buf = (unsigned char *) data;
+ } else {
+ /* Create a temporary buffer and copy the user's data
+ into it, padding the rest with zeros. */
+ buf = (unsigned char *) malloc(dev->output_report_length);
+ memcpy(buf, data, length);
+ memset(buf + length, 0, dev->output_report_length - length);
+ length = dev->output_report_length;
+ }
+
+ res = WriteFile(dev->device_handle, buf, length, NULL, &ol);
+
+ if (!res) {
+ if (GetLastError() != ERROR_IO_PENDING) {
+ /* WriteFile() failed. Return error. */
+ register_error(dev, "WriteFile");
+ bytes_written = -1;
+ goto end_of_function;
+ }
+ }
+
+ /* Wait here until the write is done. This makes
+ hid_write() synchronous. */
+ res = GetOverlappedResult(dev->device_handle, &ol, &bytes_written, TRUE/*wait*/);
+ if (!res) {
+ /* The Write operation failed. */
+ register_error(dev, "WriteFile");
+ bytes_written = -1;
+ goto end_of_function;
+ }
+
+end_of_function:
+ if (buf != data)
+ free(buf);
+
+ return bytes_written;
+}
+
+
+int HID_API_EXPORT HID_API_CALL hid_read_timeout(hid_device *dev, unsigned char *data, size_t length, int milliseconds)
+{
+ DWORD bytes_read = 0;
+ size_t copy_len = 0;
+ BOOL res;
+
+ /* Copy the handle for convenience. */
+ HANDLE ev = dev->ol.hEvent;
+
+ if (!dev->read_pending) {
+ /* Start an Overlapped I/O read. */
+ dev->read_pending = TRUE;
+ memset(dev->read_buf, 0, dev->input_report_length);
+ ResetEvent(ev);
+ res = ReadFile(dev->device_handle, dev->read_buf, dev->input_report_length, &bytes_read, &dev->ol);
+
+ if (!res) {
+ if (GetLastError() != ERROR_IO_PENDING) {
+ /* ReadFile() has failed.
+ Clean up and return error. */
+ CancelIo(dev->device_handle);
+ dev->read_pending = FALSE;
+ goto end_of_function;
+ }
+ }
+ }
+
+ if (milliseconds >= 0) {
+ /* See if there is any data yet. */
+ res = WaitForSingleObject(ev, milliseconds);
+ if (res != WAIT_OBJECT_0) {
+ /* There was no data this time. Return zero bytes available,
+ but leave the Overlapped I/O running. */
+ return 0;
+ }
+ }
+
+ /* Either WaitForSingleObject() told us that ReadFile has completed, or
+ we are in non-blocking mode. Get the number of bytes read. The actual
+ data has been copied to the data[] array which was passed to ReadFile(). */
+ res = GetOverlappedResult(dev->device_handle, &dev->ol, &bytes_read, TRUE/*wait*/);
+
+ /* Set pending back to false, even if GetOverlappedResult() returned error. */
+ dev->read_pending = FALSE;
+
+ if (res && bytes_read > 0) {
+ if (dev->read_buf[0] == 0x0) {
+ /* If report numbers aren't being used, but Windows sticks a report
+ number (0x0) on the beginning of the report anyway. To make this
+ work like the other platforms, and to make it work more like the
+ HID spec, we'll skip over this byte. */
+ bytes_read--;
+ copy_len = length > bytes_read ? bytes_read : length;
+ memcpy(data, dev->read_buf+1, copy_len);
+ }
+ else {
+ /* Copy the whole buffer, report number and all. */
+ copy_len = length > bytes_read ? bytes_read : length;
+ memcpy(data, dev->read_buf, copy_len);
+ }
+ }
+
+end_of_function:
+ if (!res) {
+ register_error(dev, "GetOverlappedResult");
+ return -1;
+ }
+
+ return copy_len;
+}
+
+int HID_API_EXPORT HID_API_CALL hid_read(hid_device *dev, unsigned char *data, size_t length)
+{
+ return hid_read_timeout(dev, data, length, (dev->blocking)? -1: 0);
+}
+
+int HID_API_EXPORT HID_API_CALL hid_set_nonblocking(hid_device *dev, int nonblock)
+{
+ dev->blocking = !nonblock;
+ return 0; /* Success */
+}
+
+int HID_API_EXPORT HID_API_CALL hid_send_feature_report(hid_device *dev, const unsigned char *data, size_t length)
+{
+ BOOL res = HidD_SetFeature(dev->device_handle, (PVOID)data, length);
+ if (!res) {
+ register_error(dev, "HidD_SetFeature");
+ return -1;
+ }
+
+ return length;
+}
+
+
+int HID_API_EXPORT HID_API_CALL hid_get_feature_report(hid_device *dev, unsigned char *data, size_t length)
+{
+ BOOL res;
+#if 0
+ res = HidD_GetFeature(dev->device_handle, data, length);
+ if (!res) {
+ register_error(dev, "HidD_GetFeature");
+ return -1;
+ }
+ return 0; /* HidD_GetFeature() doesn't give us an actual length, unfortunately */
+#else
+ DWORD bytes_returned;
+
+ OVERLAPPED ol;
+ memset(&ol, 0, sizeof(ol));
+
+ res = DeviceIoControl(dev->device_handle,
+ IOCTL_HID_GET_FEATURE,
+ data, length,
+ data, length,
+ &bytes_returned, &ol);
+
+ if (!res) {
+ if (GetLastError() != ERROR_IO_PENDING) {
+ /* DeviceIoControl() failed. Return error. */
+ register_error(dev, "Send Feature Report DeviceIoControl");
+ return -1;
+ }
+ }
+
+ /* Wait here until the write is done. This makes
+ hid_get_feature_report() synchronous. */
+ res = GetOverlappedResult(dev->device_handle, &ol, &bytes_returned, TRUE/*wait*/);
+ if (!res) {
+ /* The operation failed. */
+ register_error(dev, "Send Feature Report GetOverLappedResult");
+ return -1;
+ }
+
+ /* bytes_returned does not include the first byte which contains the
+ report ID. The data buffer actually contains one more byte than
+ bytes_returned. */
+ bytes_returned++;
+
+ return bytes_returned;
+#endif
+}
+
+void HID_API_EXPORT HID_API_CALL hid_close(hid_device *dev)
+{
+ if (!dev)
+ return;
+ CancelIo(dev->device_handle);
+ free_hid_device(dev);
+}
+
+int HID_API_EXPORT_CALL HID_API_CALL hid_get_manufacturer_string(hid_device *dev, wchar_t *string, size_t maxlen)
+{
+ BOOL res;
+
+ res = HidD_GetManufacturerString(dev->device_handle, string, sizeof(wchar_t) * MIN(maxlen, MAX_STRING_WCHARS));
+ if (!res) {
+ register_error(dev, "HidD_GetManufacturerString");
+ return -1;
+ }
+
+ return 0;
+}
+
+int HID_API_EXPORT_CALL HID_API_CALL hid_get_product_string(hid_device *dev, wchar_t *string, size_t maxlen)
+{
+ BOOL res;
+
+ res = HidD_GetProductString(dev->device_handle, string, sizeof(wchar_t) * MIN(maxlen, MAX_STRING_WCHARS));
+ if (!res) {
+ register_error(dev, "HidD_GetProductString");
+ return -1;
+ }
+
+ return 0;
+}
+
+int HID_API_EXPORT_CALL HID_API_CALL hid_get_serial_number_string(hid_device *dev, wchar_t *string, size_t maxlen)
+{
+ BOOL res;
+
+ res = HidD_GetSerialNumberString(dev->device_handle, string, sizeof(wchar_t) * MIN(maxlen, MAX_STRING_WCHARS));
+ if (!res) {
+ register_error(dev, "HidD_GetSerialNumberString");
+ return -1;
+ }
+
+ return 0;
+}
+
+int HID_API_EXPORT_CALL HID_API_CALL hid_get_indexed_string(hid_device *dev, int string_index, wchar_t *string, size_t maxlen)
+{
+ BOOL res;
+
+ res = HidD_GetIndexedString(dev->device_handle, string_index, string, sizeof(wchar_t) * MIN(maxlen, MAX_STRING_WCHARS));
+ if (!res) {
+ register_error(dev, "HidD_GetIndexedString");
+ return -1;
+ }
+
+ return 0;
+}
+
+
+HID_API_EXPORT const wchar_t * HID_API_CALL hid_error(hid_device *dev)
+{
+ return (wchar_t*)dev->last_error_str;
+}
+
+
+/*#define PICPGM*/
+/*#define S11*/
+#define P32
+#ifdef S11
+ unsigned short VendorID = 0xa0a0;
+ unsigned short ProductID = 0x0001;
+#endif
+
+#ifdef P32
+ unsigned short VendorID = 0x04d8;
+ unsigned short ProductID = 0x3f;
+#endif
+
+
+#ifdef PICPGM
+ unsigned short VendorID = 0x04d8;
+ unsigned short ProductID = 0x0033;
+#endif
+
+
+#if 0
+int __cdecl main(int argc, char* argv[])
+{
+ int res;
+ unsigned char buf[65];
+
+ UNREFERENCED_PARAMETER(argc);
+ UNREFERENCED_PARAMETER(argv);
+
+ /* Set up the command buffer. */
+ memset(buf,0x00,sizeof(buf));
+ buf[0] = 0;
+ buf[1] = 0x81;
+
+
+ /* Open the device. */
+ int handle = open(VendorID, ProductID, L"12345");
+ if (handle < 0)
+ printf("unable to open device\n");
+
+
+ /* Toggle LED (cmd 0x80) */
+ buf[1] = 0x80;
+ res = write(handle, buf, 65);
+ if (res < 0)
+ printf("Unable to write()\n");
+
+ /* Request state (cmd 0x81) */
+ buf[1] = 0x81;
+ write(handle, buf, 65);
+ if (res < 0)
+ printf("Unable to write() (2)\n");
+
+ /* Read requested state */
+ read(handle, buf, 65);
+ if (res < 0)
+ printf("Unable to read()\n");
+
+ /* Print out the returned buffer. */
+ for (int i = 0; i < 4; i++)
+ printf("buf[%d]: %d\n", i, buf[i]);
+
+ return 0;
+}
+#endif
+
+#ifdef __cplusplus
+} /* extern "C" */
+#endif