aboutsummaryrefslogtreecommitdiff
path: root/vendor/github.com/karalabe/hid/libusb/libusb/libusbi.h
diff options
context:
space:
mode:
Diffstat (limited to 'vendor/github.com/karalabe/hid/libusb/libusb/libusbi.h')
-rw-r--r--vendor/github.com/karalabe/hid/libusb/libusb/libusbi.h1149
1 files changed, 1149 insertions, 0 deletions
diff --git a/vendor/github.com/karalabe/hid/libusb/libusb/libusbi.h b/vendor/github.com/karalabe/hid/libusb/libusb/libusbi.h
new file mode 100644
index 0000000..752e398
--- /dev/null
+++ b/vendor/github.com/karalabe/hid/libusb/libusb/libusbi.h
@@ -0,0 +1,1149 @@
+/*
+ * Internal header for libusb
+ * Copyright © 2007-2009 Daniel Drake <dsd@gentoo.org>
+ * Copyright © 2001 Johannes Erdfelt <johannes@erdfelt.com>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef LIBUSBI_H
+#define LIBUSBI_H
+
+#include <config.h>
+
+#include <stdlib.h>
+
+#include <stddef.h>
+#include <stdint.h>
+#include <time.h>
+#include <stdarg.h>
+#ifdef HAVE_POLL_H
+#include <poll.h>
+#endif
+#ifdef HAVE_MISSING_H
+#include <missing.h>
+#endif
+
+#include "libusb.h"
+#include "version.h"
+
+/* Inside the libusb code, mark all public functions as follows:
+ * return_type API_EXPORTED function_name(params) { ... }
+ * But if the function returns a pointer, mark it as follows:
+ * DEFAULT_VISIBILITY return_type * LIBUSB_CALL function_name(params) { ... }
+ * In the libusb public header, mark all declarations as:
+ * return_type LIBUSB_CALL function_name(params);
+ */
+#define API_EXPORTED LIBUSB_CALL DEFAULT_VISIBILITY
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define DEVICE_DESC_LENGTH 18
+
+#define USB_MAXENDPOINTS 32
+#define USB_MAXINTERFACES 32
+#define USB_MAXCONFIG 8
+
+/* Backend specific capabilities */
+#define USBI_CAP_HAS_HID_ACCESS 0x00010000
+#define USBI_CAP_SUPPORTS_DETACH_KERNEL_DRIVER 0x00020000
+
+/* Maximum number of bytes in a log line */
+#define USBI_MAX_LOG_LEN 1024
+/* Terminator for log lines */
+#define USBI_LOG_LINE_END "\n"
+
+/* The following is used to silence warnings for unused variables */
+#define UNUSED(var) do { (void)(var); } while(0)
+
+#if !defined(ARRAYSIZE)
+#define ARRAYSIZE(array) (sizeof(array) / sizeof(array[0]))
+#endif
+
+struct list_head {
+ struct list_head *prev, *next;
+};
+
+/* Get an entry from the list
+ * ptr - the address of this list_head element in "type"
+ * type - the data type that contains "member"
+ * member - the list_head element in "type"
+ */
+#define list_entry(ptr, type, member) \
+ ((type *)((uintptr_t)(ptr) - (uintptr_t)offsetof(type, member)))
+
+#define list_first_entry(ptr, type, member) \
+ list_entry((ptr)->next, type, member)
+
+/* Get each entry from a list
+ * pos - A structure pointer has a "member" element
+ * head - list head
+ * member - the list_head element in "pos"
+ * type - the type of the first parameter
+ */
+#define list_for_each_entry(pos, head, member, type) \
+ for (pos = list_entry((head)->next, type, member); \
+ &pos->member != (head); \
+ pos = list_entry(pos->member.next, type, member))
+
+#define list_for_each_entry_safe(pos, n, head, member, type) \
+ for (pos = list_entry((head)->next, type, member), \
+ n = list_entry(pos->member.next, type, member); \
+ &pos->member != (head); \
+ pos = n, n = list_entry(n->member.next, type, member))
+
+#define list_empty(entry) ((entry)->next == (entry))
+
+static inline void list_init(struct list_head *entry)
+{
+ entry->prev = entry->next = entry;
+}
+
+static inline void list_add(struct list_head *entry, struct list_head *head)
+{
+ entry->next = head->next;
+ entry->prev = head;
+
+ head->next->prev = entry;
+ head->next = entry;
+}
+
+static inline void list_add_tail(struct list_head *entry,
+ struct list_head *head)
+{
+ entry->next = head;
+ entry->prev = head->prev;
+
+ head->prev->next = entry;
+ head->prev = entry;
+}
+
+static inline void list_del(struct list_head *entry)
+{
+ entry->next->prev = entry->prev;
+ entry->prev->next = entry->next;
+ entry->next = entry->prev = NULL;
+}
+
+static inline void *usbi_reallocf(void *ptr, size_t size)
+{
+ void *ret = realloc(ptr, size);
+ if (!ret)
+ free(ptr);
+ return ret;
+}
+
+#define container_of(ptr, type, member) ({ \
+ const typeof( ((type *)0)->member ) *mptr = (ptr); \
+ (type *)( (char *)mptr - offsetof(type,member) );})
+
+#ifndef MIN
+#define MIN(a, b) ((a) < (b) ? (a) : (b))
+#endif
+#ifndef MAX
+#define MAX(a, b) ((a) > (b) ? (a) : (b))
+#endif
+
+#define TIMESPEC_IS_SET(ts) ((ts)->tv_sec != 0 || (ts)->tv_nsec != 0)
+
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+#define TIMEVAL_TV_SEC_TYPE long
+#else
+#define TIMEVAL_TV_SEC_TYPE time_t
+#endif
+
+/* Some platforms don't have this define */
+#ifndef TIMESPEC_TO_TIMEVAL
+#define TIMESPEC_TO_TIMEVAL(tv, ts) \
+ do { \
+ (tv)->tv_sec = (TIMEVAL_TV_SEC_TYPE) (ts)->tv_sec; \
+ (tv)->tv_usec = (ts)->tv_nsec / 1000; \
+ } while (0)
+#endif
+
+void usbi_log(struct libusb_context *ctx, enum libusb_log_level level,
+ const char *function, const char *format, ...);
+
+void usbi_log_v(struct libusb_context *ctx, enum libusb_log_level level,
+ const char *function, const char *format, va_list args);
+
+#if !defined(_MSC_VER) || _MSC_VER >= 1400
+
+#ifdef ENABLE_LOGGING
+#define _usbi_log(ctx, level, ...) usbi_log(ctx, level, __FUNCTION__, __VA_ARGS__)
+#define usbi_dbg(...) _usbi_log(NULL, LIBUSB_LOG_LEVEL_DEBUG, __VA_ARGS__)
+#else
+#define _usbi_log(ctx, level, ...) do { (void)(ctx); } while(0)
+#define usbi_dbg(...) do {} while(0)
+#endif
+
+#define usbi_info(ctx, ...) _usbi_log(ctx, LIBUSB_LOG_LEVEL_INFO, __VA_ARGS__)
+#define usbi_warn(ctx, ...) _usbi_log(ctx, LIBUSB_LOG_LEVEL_WARNING, __VA_ARGS__)
+#define usbi_err(ctx, ...) _usbi_log(ctx, LIBUSB_LOG_LEVEL_ERROR, __VA_ARGS__)
+
+#else /* !defined(_MSC_VER) || _MSC_VER >= 1400 */
+
+#ifdef ENABLE_LOGGING
+#define LOG_BODY(ctxt, level) \
+{ \
+ va_list args; \
+ va_start(args, format); \
+ usbi_log_v(ctxt, level, "", format, args); \
+ va_end(args); \
+}
+#else
+#define LOG_BODY(ctxt, level) \
+{ \
+ (void)(ctxt); \
+}
+#endif
+
+static inline void usbi_info(struct libusb_context *ctx, const char *format, ...)
+ LOG_BODY(ctx, LIBUSB_LOG_LEVEL_INFO)
+static inline void usbi_warn(struct libusb_context *ctx, const char *format, ...)
+ LOG_BODY(ctx, LIBUSB_LOG_LEVEL_WARNING)
+static inline void usbi_err(struct libusb_context *ctx, const char *format, ...)
+ LOG_BODY(ctx, LIBUSB_LOG_LEVEL_ERROR)
+
+static inline void usbi_dbg(const char *format, ...)
+ LOG_BODY(NULL, LIBUSB_LOG_LEVEL_DEBUG)
+
+#endif /* !defined(_MSC_VER) || _MSC_VER >= 1400 */
+
+#define USBI_GET_CONTEXT(ctx) \
+ do { \
+ if (!(ctx)) \
+ (ctx) = usbi_default_context; \
+ } while(0)
+
+#define DEVICE_CTX(dev) ((dev)->ctx)
+#define HANDLE_CTX(handle) (DEVICE_CTX((handle)->dev))
+#define TRANSFER_CTX(transfer) (HANDLE_CTX((transfer)->dev_handle))
+#define ITRANSFER_CTX(transfer) \
+ (TRANSFER_CTX(USBI_TRANSFER_TO_LIBUSB_TRANSFER(transfer)))
+
+#define IS_EPIN(ep) (0 != ((ep) & LIBUSB_ENDPOINT_IN))
+#define IS_EPOUT(ep) (!IS_EPIN(ep))
+#define IS_XFERIN(xfer) (0 != ((xfer)->endpoint & LIBUSB_ENDPOINT_IN))
+#define IS_XFEROUT(xfer) (!IS_XFERIN(xfer))
+
+/* Internal abstraction for thread synchronization */
+#if defined(THREADS_POSIX)
+#include "os/threads_posix.h"
+#elif defined(OS_WINDOWS) || defined(OS_WINCE)
+#include "os/threads_windows.h"
+#endif
+
+extern struct libusb_context *usbi_default_context;
+
+/* Forward declaration for use in context (fully defined inside poll abstraction) */
+struct pollfd;
+
+struct libusb_context {
+ int debug;
+ int debug_fixed;
+
+ /* internal event pipe, used for signalling occurrence of an internal event. */
+ int event_pipe[2];
+
+ struct list_head usb_devs;
+ usbi_mutex_t usb_devs_lock;
+
+ /* A list of open handles. Backends are free to traverse this if required.
+ */
+ struct list_head open_devs;
+ usbi_mutex_t open_devs_lock;
+
+ /* A list of registered hotplug callbacks */
+ struct list_head hotplug_cbs;
+ usbi_mutex_t hotplug_cbs_lock;
+
+ /* this is a list of in-flight transfer handles, sorted by timeout
+ * expiration. URBs to timeout the soonest are placed at the beginning of
+ * the list, URBs that will time out later are placed after, and urbs with
+ * infinite timeout are always placed at the very end. */
+ struct list_head flying_transfers;
+ /* Note paths taking both this and usbi_transfer->lock must always
+ * take this lock first */
+ usbi_mutex_t flying_transfers_lock;
+
+ /* user callbacks for pollfd changes */
+ libusb_pollfd_added_cb fd_added_cb;
+ libusb_pollfd_removed_cb fd_removed_cb;
+ void *fd_cb_user_data;
+
+ /* ensures that only one thread is handling events at any one time */
+ usbi_mutex_t events_lock;
+
+ /* used to see if there is an active thread doing event handling */
+ int event_handler_active;
+
+ /* A thread-local storage key to track which thread is performing event
+ * handling */
+ usbi_tls_key_t event_handling_key;
+
+ /* used to wait for event completion in threads other than the one that is
+ * event handling */
+ usbi_mutex_t event_waiters_lock;
+ usbi_cond_t event_waiters_cond;
+
+ /* A lock to protect internal context event data. */
+ usbi_mutex_t event_data_lock;
+
+ /* A bitmask of flags that are set to indicate specific events that need to
+ * be handled. Protected by event_data_lock. */
+ unsigned int event_flags;
+
+ /* A counter that is set when we want to interrupt and prevent event handling,
+ * in order to safely close a device. Protected by event_data_lock. */
+ unsigned int device_close;
+
+ /* list and count of poll fds and an array of poll fd structures that is
+ * (re)allocated as necessary prior to polling. Protected by event_data_lock. */
+ struct list_head ipollfds;
+ struct pollfd *pollfds;
+ POLL_NFDS_TYPE pollfds_cnt;
+
+ /* A list of pending hotplug messages. Protected by event_data_lock. */
+ struct list_head hotplug_msgs;
+
+ /* A list of pending completed transfers. Protected by event_data_lock. */
+ struct list_head completed_transfers;
+
+#ifdef USBI_TIMERFD_AVAILABLE
+ /* used for timeout handling, if supported by OS.
+ * this timerfd is maintained to trigger on the next pending timeout */
+ int timerfd;
+#endif
+
+ struct list_head list;
+};
+
+enum usbi_event_flags {
+ /* The list of pollfds has been modified */
+ USBI_EVENT_POLLFDS_MODIFIED = 1 << 0,
+
+ /* The user has interrupted the event handler */
+ USBI_EVENT_USER_INTERRUPT = 1 << 1,
+};
+
+/* Macros for managing event handling state */
+#define usbi_handling_events(ctx) \
+ (usbi_tls_key_get((ctx)->event_handling_key) != NULL)
+
+#define usbi_start_event_handling(ctx) \
+ usbi_tls_key_set((ctx)->event_handling_key, ctx)
+
+#define usbi_end_event_handling(ctx) \
+ usbi_tls_key_set((ctx)->event_handling_key, NULL)
+
+/* Update the following macro if new event sources are added */
+#define usbi_pending_events(ctx) \
+ ((ctx)->event_flags || (ctx)->device_close \
+ || !list_empty(&(ctx)->hotplug_msgs) || !list_empty(&(ctx)->completed_transfers))
+
+#ifdef USBI_TIMERFD_AVAILABLE
+#define usbi_using_timerfd(ctx) ((ctx)->timerfd >= 0)
+#else
+#define usbi_using_timerfd(ctx) (0)
+#endif
+
+struct libusb_device {
+ /* lock protects refcnt, everything else is finalized at initialization
+ * time */
+ usbi_mutex_t lock;
+ int refcnt;
+
+ struct libusb_context *ctx;
+
+ uint8_t bus_number;
+ uint8_t port_number;
+ struct libusb_device* parent_dev;
+ uint8_t device_address;
+ uint8_t num_configurations;
+ enum libusb_speed speed;
+
+ struct list_head list;
+ unsigned long session_data;
+
+ struct libusb_device_descriptor device_descriptor;
+ int attached;
+
+ unsigned char os_priv
+#if defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L)
+ [] /* valid C99 code */
+#else
+ [0] /* non-standard, but usually working code */
+#endif
+#if defined(OS_SUNOS)
+ __attribute__ ((aligned (8)));
+#else
+ ;
+#endif
+};
+
+struct libusb_device_handle {
+ /* lock protects claimed_interfaces */
+ usbi_mutex_t lock;
+ unsigned long claimed_interfaces;
+
+ struct list_head list;
+ struct libusb_device *dev;
+ int auto_detach_kernel_driver;
+ unsigned char os_priv
+#if defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L)
+ [] /* valid C99 code */
+#else
+ [0] /* non-standard, but usually working code */
+#endif
+#if defined(OS_SUNOS)
+ __attribute__ ((aligned (8)));
+#else
+ ;
+#endif
+};
+
+enum {
+ USBI_CLOCK_MONOTONIC,
+ USBI_CLOCK_REALTIME
+};
+
+/* in-memory transfer layout:
+ *
+ * 1. struct usbi_transfer
+ * 2. struct libusb_transfer (which includes iso packets) [variable size]
+ * 3. os private data [variable size]
+ *
+ * from a libusb_transfer, you can get the usbi_transfer by rewinding the
+ * appropriate number of bytes.
+ * the usbi_transfer includes the number of allocated packets, so you can
+ * determine the size of the transfer and hence the start and length of the
+ * OS-private data.
+ */
+
+struct usbi_transfer {
+ int num_iso_packets;
+ struct list_head list;
+ struct list_head completed_list;
+ struct timeval timeout;
+ int transferred;
+ uint32_t stream_id;
+ uint8_t state_flags; /* Protected by usbi_transfer->lock */
+ uint8_t timeout_flags; /* Protected by the flying_stransfers_lock */
+
+ /* this lock is held during libusb_submit_transfer() and
+ * libusb_cancel_transfer() (allowing the OS backend to prevent duplicate
+ * cancellation, submission-during-cancellation, etc). the OS backend
+ * should also take this lock in the handle_events path, to prevent the user
+ * cancelling the transfer from another thread while you are processing
+ * its completion (presumably there would be races within your OS backend
+ * if this were possible).
+ * Note paths taking both this and the flying_transfers_lock must
+ * always take the flying_transfers_lock first */
+ usbi_mutex_t lock;
+};
+
+enum usbi_transfer_state_flags {
+ /* Transfer successfully submitted by backend */
+ USBI_TRANSFER_IN_FLIGHT = 1 << 0,
+
+ /* Cancellation was requested via libusb_cancel_transfer() */
+ USBI_TRANSFER_CANCELLING = 1 << 1,
+
+ /* Operation on the transfer failed because the device disappeared */
+ USBI_TRANSFER_DEVICE_DISAPPEARED = 1 << 2,
+};
+
+enum usbi_transfer_timeout_flags {
+ /* Set by backend submit_transfer() if the OS handles timeout */
+ USBI_TRANSFER_OS_HANDLES_TIMEOUT = 1 << 0,
+
+ /* The transfer timeout has been handled */
+ USBI_TRANSFER_TIMEOUT_HANDLED = 1 << 1,
+
+ /* The transfer timeout was successfully processed */
+ USBI_TRANSFER_TIMED_OUT = 1 << 2,
+};
+
+#define USBI_TRANSFER_TO_LIBUSB_TRANSFER(transfer) \
+ ((struct libusb_transfer *)(((unsigned char *)(transfer)) \
+ + sizeof(struct usbi_transfer)))
+#define LIBUSB_TRANSFER_TO_USBI_TRANSFER(transfer) \
+ ((struct usbi_transfer *)(((unsigned char *)(transfer)) \
+ - sizeof(struct usbi_transfer)))
+
+static inline void *usbi_transfer_get_os_priv(struct usbi_transfer *transfer)
+{
+ return ((unsigned char *)transfer) + sizeof(struct usbi_transfer)
+ + sizeof(struct libusb_transfer)
+ + (transfer->num_iso_packets
+ * sizeof(struct libusb_iso_packet_descriptor));
+}
+
+/* bus structures */
+
+/* All standard descriptors have these 2 fields in common */
+struct usb_descriptor_header {
+ uint8_t bLength;
+ uint8_t bDescriptorType;
+};
+
+/* shared data and functions */
+
+int usbi_io_init(struct libusb_context *ctx);
+void usbi_io_exit(struct libusb_context *ctx);
+
+struct libusb_device *usbi_alloc_device(struct libusb_context *ctx,
+ unsigned long session_id);
+struct libusb_device *usbi_get_device_by_session_id(struct libusb_context *ctx,
+ unsigned long session_id);
+int usbi_sanitize_device(struct libusb_device *dev);
+void usbi_handle_disconnect(struct libusb_device_handle *dev_handle);
+
+int usbi_handle_transfer_completion(struct usbi_transfer *itransfer,
+ enum libusb_transfer_status status);
+int usbi_handle_transfer_cancellation(struct usbi_transfer *transfer);
+void usbi_signal_transfer_completion(struct usbi_transfer *transfer);
+
+int usbi_parse_descriptor(const unsigned char *source, const char *descriptor,
+ void *dest, int host_endian);
+int usbi_device_cache_descriptor(libusb_device *dev);
+int usbi_get_config_index_by_value(struct libusb_device *dev,
+ uint8_t bConfigurationValue, int *idx);
+
+void usbi_connect_device (struct libusb_device *dev);
+void usbi_disconnect_device (struct libusb_device *dev);
+
+int usbi_signal_event(struct libusb_context *ctx);
+int usbi_clear_event(struct libusb_context *ctx);
+
+/* Internal abstraction for poll (needs struct usbi_transfer on Windows) */
+#if defined(OS_LINUX) || defined(OS_DARWIN) || defined(OS_OPENBSD) || defined(OS_NETBSD) ||\
+ defined(OS_HAIKU) || defined(OS_SUNOS)
+#include <unistd.h>
+#include "os/poll_posix.h"
+#elif defined(OS_WINDOWS) || defined(OS_WINCE)
+#include "os/poll_windows.h"
+#endif
+
+#if defined(_MSC_VER) && (_MSC_VER < 1900)
+#define snprintf usbi_snprintf
+#define vsnprintf usbi_vsnprintf
+int usbi_snprintf(char *dst, size_t size, const char *format, ...);
+int usbi_vsnprintf(char *dst, size_t size, const char *format, va_list ap);
+#define LIBUSB_PRINTF_WIN32
+#endif
+
+struct usbi_pollfd {
+ /* must come first */
+ struct libusb_pollfd pollfd;
+
+ struct list_head list;
+};
+
+int usbi_add_pollfd(struct libusb_context *ctx, int fd, short events);
+void usbi_remove_pollfd(struct libusb_context *ctx, int fd);
+
+/* device discovery */
+
+/* we traverse usbfs without knowing how many devices we are going to find.
+ * so we create this discovered_devs model which is similar to a linked-list
+ * which grows when required. it can be freed once discovery has completed,
+ * eliminating the need for a list node in the libusb_device structure
+ * itself. */
+struct discovered_devs {
+ size_t len;
+ size_t capacity;
+ struct libusb_device *devices
+#if defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L)
+ [] /* valid C99 code */
+#else
+ [0] /* non-standard, but usually working code */
+#endif
+ ;
+};
+
+struct discovered_devs *discovered_devs_append(
+ struct discovered_devs *discdevs, struct libusb_device *dev);
+
+/* OS abstraction */
+
+/* This is the interface that OS backends need to implement.
+ * All fields are mandatory, except ones explicitly noted as optional. */
+struct usbi_os_backend {
+ /* A human-readable name for your backend, e.g. "Linux usbfs" */
+ const char *name;
+
+ /* Binary mask for backend specific capabilities */
+ uint32_t caps;
+
+ /* Perform initialization of your backend. You might use this function
+ * to determine specific capabilities of the system, allocate required
+ * data structures for later, etc.
+ *
+ * This function is called when a libusb user initializes the library
+ * prior to use.
+ *
+ * Return 0 on success, or a LIBUSB_ERROR code on failure.
+ */
+ int (*init)(struct libusb_context *ctx);
+
+ /* Deinitialization. Optional. This function should destroy anything
+ * that was set up by init.
+ *
+ * This function is called when the user deinitializes the library.
+ */
+ void (*exit)(void);
+
+ /* Enumerate all the USB devices on the system, returning them in a list
+ * of discovered devices.
+ *
+ * Your implementation should enumerate all devices on the system,
+ * regardless of whether they have been seen before or not.
+ *
+ * When you have found a device, compute a session ID for it. The session
+ * ID should uniquely represent that particular device for that particular
+ * connection session since boot (i.e. if you disconnect and reconnect a
+ * device immediately after, it should be assigned a different session ID).
+ * If your OS cannot provide a unique session ID as described above,
+ * presenting a session ID of (bus_number << 8 | device_address) should
+ * be sufficient. Bus numbers and device addresses wrap and get reused,
+ * but that is an unlikely case.
+ *
+ * After computing a session ID for a device, call
+ * usbi_get_device_by_session_id(). This function checks if libusb already
+ * knows about the device, and if so, it provides you with a reference
+ * to a libusb_device structure for it.
+ *
+ * If usbi_get_device_by_session_id() returns NULL, it is time to allocate
+ * a new device structure for the device. Call usbi_alloc_device() to
+ * obtain a new libusb_device structure with reference count 1. Populate
+ * the bus_number and device_address attributes of the new device, and
+ * perform any other internal backend initialization you need to do. At
+ * this point, you should be ready to provide device descriptors and so
+ * on through the get_*_descriptor functions. Finally, call
+ * usbi_sanitize_device() to perform some final sanity checks on the
+ * device. Assuming all of the above succeeded, we can now continue.
+ * If any of the above failed, remember to unreference the device that
+ * was returned by usbi_alloc_device().
+ *
+ * At this stage we have a populated libusb_device structure (either one
+ * that was found earlier, or one that we have just allocated and
+ * populated). This can now be added to the discovered devices list
+ * using discovered_devs_append(). Note that discovered_devs_append()
+ * may reallocate the list, returning a new location for it, and also
+ * note that reallocation can fail. Your backend should handle these
+ * error conditions appropriately.
+ *
+ * This function should not generate any bus I/O and should not block.
+ * If I/O is required (e.g. reading the active configuration value), it is
+ * OK to ignore these suggestions :)
+ *
+ * This function is executed when the user wishes to retrieve a list
+ * of USB devices connected to the system.
+ *
+ * If the backend has hotplug support, this function is not used!
+ *
+ * Return 0 on success, or a LIBUSB_ERROR code on failure.
+ */
+ int (*get_device_list)(struct libusb_context *ctx,
+ struct discovered_devs **discdevs);
+
+ /* Apps which were written before hotplug support, may listen for
+ * hotplug events on their own and call libusb_get_device_list on
+ * device addition. In this case libusb_get_device_list will likely
+ * return a list without the new device in there, as the hotplug
+ * event thread will still be busy enumerating the device, which may
+ * take a while, or may not even have seen the event yet.
+ *
+ * To avoid this libusb_get_device_list will call this optional
+ * function for backends with hotplug support before copying
+ * ctx->usb_devs to the user. In this function the backend should
+ * ensure any pending hotplug events are fully processed before
+ * returning.
+ *
+ * Optional, should be implemented by backends with hotplug support.
+ */
+ void (*hotplug_poll)(void);
+
+ /* Open a device for I/O and other USB operations. The device handle
+ * is preallocated for you, you can retrieve the device in question
+ * through handle->dev.
+ *
+ * Your backend should allocate any internal resources required for I/O
+ * and other operations so that those operations can happen (hopefully)
+ * without hiccup. This is also a good place to inform libusb that it
+ * should monitor certain file descriptors related to this device -
+ * see the usbi_add_pollfd() function.
+ *
+ * This function should not generate any bus I/O and should not block.
+ *
+ * This function is called when the user attempts to obtain a device
+ * handle for a device.
+ *
+ * Return:
+ * - 0 on success
+ * - LIBUSB_ERROR_ACCESS if the user has insufficient permissions
+ * - LIBUSB_ERROR_NO_DEVICE if the device has been disconnected since
+ * discovery
+ * - another LIBUSB_ERROR code on other failure
+ *
+ * Do not worry about freeing the handle on failed open, the upper layers
+ * do this for you.
+ */
+ int (*open)(struct libusb_device_handle *dev_handle);
+
+ /* Close a device such that the handle cannot be used again. Your backend
+ * should destroy any resources that were allocated in the open path.
+ * This may also be a good place to call usbi_remove_pollfd() to inform
+ * libusb of any file descriptors associated with this device that should
+ * no longer be monitored.
+ *
+ * This function is called when the user closes a device handle.
+ */
+ void (*close)(struct libusb_device_handle *dev_handle);
+
+ /* Retrieve the device descriptor from a device.
+ *
+ * The descriptor should be retrieved from memory, NOT via bus I/O to the
+ * device. This means that you may have to cache it in a private structure
+ * during get_device_list enumeration. Alternatively, you may be able
+ * to retrieve it from a kernel interface (some Linux setups can do this)
+ * still without generating bus I/O.
+ *
+ * This function is expected to write DEVICE_DESC_LENGTH (18) bytes into
+ * buffer, which is guaranteed to be big enough.
+ *
+ * This function is called when sanity-checking a device before adding
+ * it to the list of discovered devices, and also when the user requests
+ * to read the device descriptor.
+ *
+ * This function is expected to return the descriptor in bus-endian format
+ * (LE). If it returns the multi-byte values in host-endian format,
+ * set the host_endian output parameter to "1".
+ *
+ * Return 0 on success or a LIBUSB_ERROR code on failure.
+ */
+ int (*get_device_descriptor)(struct libusb_device *device,
+ unsigned char *buffer, int *host_endian);
+
+ /* Get the ACTIVE configuration descriptor for a device.
+ *
+ * The descriptor should be retrieved from memory, NOT via bus I/O to the
+ * device. This means that you may have to cache it in a private structure
+ * during get_device_list enumeration. You may also have to keep track
+ * of which configuration is active when the user changes it.
+ *
+ * This function is expected to write len bytes of data into buffer, which
+ * is guaranteed to be big enough. If you can only do a partial write,
+ * return an error code.
+ *
+ * This function is expected to return the descriptor in bus-endian format
+ * (LE). If it returns the multi-byte values in host-endian format,
+ * set the host_endian output parameter to "1".
+ *
+ * Return:
+ * - 0 on success
+ * - LIBUSB_ERROR_NOT_FOUND if the device is in unconfigured state
+ * - another LIBUSB_ERROR code on other failure
+ */
+ int (*get_active_config_descriptor)(struct libusb_device *device,
+ unsigned char *buffer, size_t len, int *host_endian);
+
+ /* Get a specific configuration descriptor for a device.
+ *
+ * The descriptor should be retrieved from memory, NOT via bus I/O to the
+ * device. This means that you may have to cache it in a private structure
+ * during get_device_list enumeration.
+ *
+ * The requested descriptor is expressed as a zero-based index (i.e. 0
+ * indicates that we are requesting the first descriptor). The index does
+ * not (necessarily) equal the bConfigurationValue of the configuration
+ * being requested.
+ *
+ * This function is expected to write len bytes of data into buffer, which
+ * is guaranteed to be big enough. If you can only do a partial write,
+ * return an error code.
+ *
+ * This function is expected to return the descriptor in bus-endian format
+ * (LE). If it returns the multi-byte values in host-endian format,
+ * set the host_endian output parameter to "1".
+ *
+ * Return the length read on success or a LIBUSB_ERROR code on failure.
+ */
+ int (*get_config_descriptor)(struct libusb_device *device,
+ uint8_t config_index, unsigned char *buffer, size_t len,
+ int *host_endian);
+
+ /* Like get_config_descriptor but then by bConfigurationValue instead
+ * of by index.
+ *
+ * Optional, if not present the core will call get_config_descriptor
+ * for all configs until it finds the desired bConfigurationValue.
+ *
+ * Returns a pointer to the raw-descriptor in *buffer, this memory
+ * is valid as long as device is valid.
+ *
+ * Returns the length of the returned raw-descriptor on success,
+ * or a LIBUSB_ERROR code on failure.
+ */
+ int (*get_config_descriptor_by_value)(struct libusb_device *device,
+ uint8_t bConfigurationValue, unsigned char **buffer,
+ int *host_endian);
+
+ /* Get the bConfigurationValue for the active configuration for a device.
+ * Optional. This should only be implemented if you can retrieve it from
+ * cache (don't generate I/O).
+ *
+ * If you cannot retrieve this from cache, either do not implement this
+ * function, or return LIBUSB_ERROR_NOT_SUPPORTED. This will cause
+ * libusb to retrieve the information through a standard control transfer.
+ *
+ * This function must be non-blocking.
+ * Return:
+ * - 0 on success
+ * - LIBUSB_ERROR_NO_DEVICE if the device has been disconnected since it
+ * was opened
+ * - LIBUSB_ERROR_NOT_SUPPORTED if the value cannot be retrieved without
+ * blocking
+ * - another LIBUSB_ERROR code on other failure.
+ */
+ int (*get_configuration)(struct libusb_device_handle *dev_handle, int *config);
+
+ /* Set the active configuration for a device.
+ *
+ * A configuration value of -1 should put the device in unconfigured state.
+ *
+ * This function can block.
+ *
+ * Return:
+ * - 0 on success
+ * - LIBUSB_ERROR_NOT_FOUND if the configuration does not exist
+ * - LIBUSB_ERROR_BUSY if interfaces are currently claimed (and hence
+ * configuration cannot be changed)
+ * - LIBUSB_ERROR_NO_DEVICE if the device has been disconnected since it
+ * was opened
+ * - another LIBUSB_ERROR code on other failure.
+ */
+ int (*set_configuration)(struct libusb_device_handle *dev_handle, int config);
+
+ /* Claim an interface. When claimed, the application can then perform
+ * I/O to an interface's endpoints.
+ *
+ * This function should not generate any bus I/O and should not block.
+ * Interface claiming is a logical operation that simply ensures that
+ * no other drivers/applications are using the interface, and after
+ * claiming, no other drivers/applications can use the interface because
+ * we now "own" it.
+ *
+ * Return:
+ * - 0 on success
+ * - LIBUSB_ERROR_NOT_FOUND if the interface does not exist
+ * - LIBUSB_ERROR_BUSY if the interface is in use by another driver/app
+ * - LIBUSB_ERROR_NO_DEVICE if the device has been disconnected since it
+ * was opened
+ * - another LIBUSB_ERROR code on other failure
+ */
+ int (*claim_interface)(struct libusb_device_handle *dev_handle, int interface_number);
+
+ /* Release a previously claimed interface.
+ *
+ * This function should also generate a SET_INTERFACE control request,
+ * resetting the alternate setting of that interface to 0. It's OK for
+ * this function to block as a result.
+ *
+ * You will only ever be asked to release an interface which was
+ * successfully claimed earlier.
+ *
+ * Return:
+ * - 0 on success
+ * - LIBUSB_ERROR_NO_DEVICE if the device has been disconnected since it
+ * was opened
+ * - another LIBUSB_ERROR code on other failure
+ */
+ int (*release_interface)(struct libusb_device_handle *dev_handle, int interface_number);
+
+ /* Set the alternate setting for an interface.
+ *
+ * You will only ever be asked to set the alternate setting for an
+ * interface which was successfully claimed earlier.
+ *
+ * It's OK for this function to block.
+ *
+ * Return:
+ * - 0 on success
+ * - LIBUSB_ERROR_NOT_FOUND if the alternate setting does not exist
+ * - LIBUSB_ERROR_NO_DEVICE if the device has been disconnected since it
+ * was opened
+ * - another LIBUSB_ERROR code on other failure
+ */
+ int (*set_interface_altsetting)(struct libusb_device_handle *dev_handle,
+ int interface_number, int altsetting);
+
+ /* Clear a halt/stall condition on an endpoint.
+ *
+ * It's OK for this function to block.
+ *
+ * Return:
+ * - 0 on success
+ * - LIBUSB_ERROR_NOT_FOUND if the endpoint does not exist
+ * - LIBUSB_ERROR_NO_DEVICE if the device has been disconnected since it
+ * was opened
+ * - another LIBUSB_ERROR code on other failure
+ */
+ int (*clear_halt)(struct libusb_device_handle *dev_handle,
+ unsigned char endpoint);
+
+ /* Perform a USB port reset to reinitialize a device.
+ *
+ * If possible, the device handle should still be usable after the reset
+ * completes, assuming that the device descriptors did not change during
+ * reset and all previous interface state can be restored.
+ *
+ * If something changes, or you cannot easily locate/verify the resetted
+ * device, return LIBUSB_ERROR_NOT_FOUND. This prompts the application
+ * to close the old handle and re-enumerate the device.
+ *
+ * Return:
+ * - 0 on success
+ * - LIBUSB_ERROR_NOT_FOUND if re-enumeration is required, or if the device
+ * has been disconnected since it was opened
+ * - another LIBUSB_ERROR code on other failure
+ */
+ int (*reset_device)(struct libusb_device_handle *dev_handle);
+
+ /* Alloc num_streams usb3 bulk streams on the passed in endpoints */
+ int (*alloc_streams)(struct libusb_device_handle *dev_handle,
+ uint32_t num_streams, unsigned char *endpoints, int num_endpoints);
+
+ /* Free usb3 bulk streams allocated with alloc_streams */
+ int (*free_streams)(struct libusb_device_handle *dev_handle,
+ unsigned char *endpoints, int num_endpoints);
+
+ /* Allocate persistent DMA memory for the given device, suitable for
+ * zerocopy. May return NULL on failure. Optional to implement.
+ */
+ unsigned char *(*dev_mem_alloc)(struct libusb_device_handle *handle,
+ size_t len);
+
+ /* Free memory allocated by dev_mem_alloc. */
+ int (*dev_mem_free)(struct libusb_device_handle *handle,
+ unsigned char *buffer, size_t len);
+
+ /* Determine if a kernel driver is active on an interface. Optional.
+ *
+ * The presence of a kernel driver on an interface indicates that any
+ * calls to claim_interface would fail with the LIBUSB_ERROR_BUSY code.
+ *
+ * Return:
+ * - 0 if no driver is active
+ * - 1 if a driver is active
+ * - LIBUSB_ERROR_NO_DEVICE if the device has been disconnected since it
+ * was opened
+ * - another LIBUSB_ERROR code on other failure
+ */
+ int (*kernel_driver_active)(struct libusb_device_handle *dev_handle,
+ int interface_number);
+
+ /* Detach a kernel driver from an interface. Optional.
+ *
+ * After detaching a kernel driver, the interface should be available
+ * for claim.
+ *
+ * Return:
+ * - 0 on success
+ * - LIBUSB_ERROR_NOT_FOUND if no kernel driver was active
+ * - LIBUSB_ERROR_INVALID_PARAM if the interface does not exist
+ * - LIBUSB_ERROR_NO_DEVICE if the device has been disconnected since it
+ * was opened
+ * - another LIBUSB_ERROR code on other failure
+ */
+ int (*detach_kernel_driver)(struct libusb_device_handle *dev_handle,
+ int interface_number);
+
+ /* Attach a kernel driver to an interface. Optional.
+ *
+ * Reattach a kernel driver to the device.
+ *
+ * Return:
+ * - 0 on success
+ * - LIBUSB_ERROR_NOT_FOUND if no kernel driver was active
+ * - LIBUSB_ERROR_INVALID_PARAM if the interface does not exist
+ * - LIBUSB_ERROR_NO_DEVICE if the device has been disconnected since it
+ * was opened
+ * - LIBUSB_ERROR_BUSY if a program or driver has claimed the interface,
+ * preventing reattachment
+ * - another LIBUSB_ERROR code on other failure
+ */
+ int (*attach_kernel_driver)(struct libusb_device_handle *dev_handle,
+ int interface_number);
+
+ /* Destroy a device. Optional.
+ *
+ * This function is called when the last reference to a device is
+ * destroyed. It should free any resources allocated in the get_device_list
+ * path.
+ */
+ void (*destroy_device)(struct libusb_device *dev);
+
+ /* Submit a transfer. Your implementation should take the transfer,
+ * morph it into whatever form your platform requires, and submit it
+ * asynchronously.
+ *
+ * This function must not block.
+ *
+ * This function gets called with the flying_transfers_lock locked!
+ *
+ * Return:
+ * - 0 on success
+ * - LIBUSB_ERROR_NO_DEVICE if the device has been disconnected
+ * - another LIBUSB_ERROR code on other failure
+ */
+ int (*submit_transfer)(struct usbi_transfer *itransfer);
+
+ /* Cancel a previously submitted transfer.
+ *
+ * This function must not block. The transfer cancellation must complete
+ * later, resulting in a call to usbi_handle_transfer_cancellation()
+ * from the context of handle_events.
+ */
+ int (*cancel_transfer)(struct usbi_transfer *itransfer);
+
+ /* Clear a transfer as if it has completed or cancelled, but do not
+ * report any completion/cancellation to the library. You should free
+ * all private data from the transfer as if you were just about to report
+ * completion or cancellation.
+ *
+ * This function might seem a bit out of place. It is used when libusb
+ * detects a disconnected device - it calls this function for all pending
+ * transfers before reporting completion (with the disconnect code) to
+ * the user. Maybe we can improve upon this internal interface in future.
+ */
+ void (*clear_transfer_priv)(struct usbi_transfer *itransfer);
+
+ /* Handle any pending events on file descriptors. Optional.
+ *
+ * Provide this function when file descriptors directly indicate device
+ * or transfer activity. If your backend does not have such file descriptors,
+ * implement the handle_transfer_completion function below.
+ *
+ * This involves monitoring any active transfers and processing their
+ * completion or cancellation.
+ *
+ * The function is passed an array of pollfd structures (size nfds)
+ * as a result of the poll() system call. The num_ready parameter
+ * indicates the number of file descriptors that have reported events
+ * (i.e. the poll() return value). This should be enough information
+ * for you to determine which actions need to be taken on the currently
+ * active transfers.
+ *
+ * For any cancelled transfers, call usbi_handle_transfer_cancellation().
+ * For completed transfers, call usbi_handle_transfer_completion().
+ * For control/bulk/interrupt transfers, populate the "transferred"
+ * element of the appropriate usbi_transfer structure before calling the
+ * above functions. For isochronous transfers, populate the status and
+ * transferred fields of the iso packet descriptors of the transfer.
+ *
+ * This function should also be able to detect disconnection of the
+ * device, reporting that situation with usbi_handle_disconnect().
+ *
+ * When processing an event related to a transfer, you probably want to
+ * take usbi_transfer.lock to prevent races. See the documentation for
+ * the usbi_transfer structure.
+ *
+ * Return 0 on success, or a LIBUSB_ERROR code on failure.
+ */
+ int (*handle_events)(struct libusb_context *ctx,
+ struct pollfd *fds, POLL_NFDS_TYPE nfds, int num_ready);
+
+ /* Handle transfer completion. Optional.
+ *
+ * Provide this function when there are no file descriptors available
+ * that directly indicate device or transfer activity. If your backend does
+ * have such file descriptors, implement the handle_events function above.
+ *
+ * Your backend must tell the library when a transfer has completed by
+ * calling usbi_signal_transfer_completion(). You should store any private
+ * information about the transfer and its completion status in the transfer's
+ * private backend data.
+ *
+ * During event handling, this function will be called on each transfer for
+ * which usbi_signal_transfer_completion() was called.
+ *
+ * For any cancelled transfers, call usbi_handle_transfer_cancellation().
+ * For completed transfers, call usbi_handle_transfer_completion().
+ * For control/bulk/interrupt transfers, populate the "transferred"
+ * element of the appropriate usbi_transfer structure before calling the
+ * above functions. For isochronous transfers, populate the status and
+ * transferred fields of the iso packet descriptors of the transfer.
+ *
+ * Return 0 on success, or a LIBUSB_ERROR code on failure.
+ */
+ int (*handle_transfer_completion)(struct usbi_transfer *itransfer);
+
+ /* Get time from specified clock. At least two clocks must be implemented
+ by the backend: USBI_CLOCK_REALTIME, and USBI_CLOCK_MONOTONIC.
+
+ Description of clocks:
+ USBI_CLOCK_REALTIME : clock returns time since system epoch.
+ USBI_CLOCK_MONOTONIC: clock returns time since unspecified start
+ time (usually boot).
+ */
+ int (*clock_gettime)(int clkid, struct timespec *tp);
+
+#ifdef USBI_TIMERFD_AVAILABLE
+ /* clock ID of the clock that should be used for timerfd */
+ clockid_t (*get_timerfd_clockid)(void);
+#endif
+
+ /* Number of bytes to reserve for per-device private backend data.
+ * This private data area is accessible through the "os_priv" field of
+ * struct libusb_device. */
+ size_t device_priv_size;
+
+ /* Number of bytes to reserve for per-handle private backend data.
+ * This private data area is accessible through the "os_priv" field of
+ * struct libusb_device. */
+ size_t device_handle_priv_size;
+
+ /* Number of bytes to reserve for per-transfer private backend data.
+ * This private data area is accessible by calling
+ * usbi_transfer_get_os_priv() on the appropriate usbi_transfer instance.
+ */
+ size_t transfer_priv_size;
+};
+
+extern const struct usbi_os_backend * const usbi_backend;
+
+extern const struct usbi_os_backend linux_usbfs_backend;
+extern const struct usbi_os_backend darwin_backend;
+extern const struct usbi_os_backend openbsd_backend;
+extern const struct usbi_os_backend netbsd_backend;
+extern const struct usbi_os_backend windows_backend;
+extern const struct usbi_os_backend usbdk_backend;
+extern const struct usbi_os_backend wince_backend;
+extern const struct usbi_os_backend haiku_usb_raw_backend;
+extern const struct usbi_os_backend sunos_backend;
+
+extern struct list_head active_contexts_list;
+extern usbi_mutex_static_t active_contexts_lock;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif