summaryrefslogtreecommitdiff
path: root/vendor/github.com/fluffle/goirc/doc/rfc2812.txt
diff options
context:
space:
mode:
Diffstat (limited to 'vendor/github.com/fluffle/goirc/doc/rfc2812.txt')
-rw-r--r--vendor/github.com/fluffle/goirc/doc/rfc2812.txt3531
1 files changed, 0 insertions, 3531 deletions
diff --git a/vendor/github.com/fluffle/goirc/doc/rfc2812.txt b/vendor/github.com/fluffle/goirc/doc/rfc2812.txt
deleted file mode 100644
index 7f1b162..0000000
--- a/vendor/github.com/fluffle/goirc/doc/rfc2812.txt
+++ /dev/null
@@ -1,3531 +0,0 @@
-
-
-
-
-
-
-Network Working Group C. Kalt
-Request for Comments: 2812 April 2000
-Updates: 1459
-Category: Informational
-
-
- Internet Relay Chat: Client Protocol
-
-Status of this Memo
-
- This memo provides information for the Internet community. It does
- not specify an Internet standard of any kind. Distribution of this
- memo is unlimited.
-
-Copyright Notice
-
- Copyright (C) The Internet Society (2000). All Rights Reserved.
-
-IESG NOTE:
-
- The IRC protocol itself enables several possibilities of transferring
- data between clients, and just like with other transfer mechanisms
- like email, the receiver of the data has to be careful about how the
- data is handled. For more information on security issues with the IRC
- protocol, see for example http://www.irchelp.org/irchelp/security/.
-
-Abstract
-
- The IRC (Internet Relay Chat) protocol is for use with text based
- conferencing; the simplest client being any socket program capable of
- connecting to the server.
-
- This document defines the Client Protocol, and assumes that the
- reader is familiar with the IRC Architecture [IRC-ARCH].
-
-Table of Contents
-
- 1. Labels ..................................................... 3
- 1.1 Servers ................................................ 3
- 1.2 Clients ................................................ 3
- 1.2.1 Users ............................................. 4
- 1.2.1.1 Operators .................................... 4
- 1.2.2 Services .......................................... 4
- 1.3 Channels ............................................... 4
- 2. The IRC Client Specification ............................... 5
- 2.1 Overview ............................................... 5
- 2.2 Character codes ........................................ 5
- 2.3 Messages ............................................... 5
-
-
-
-Kalt Informational [Page 1]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- 2.3.1 Message format in Augmented BNF ................... 6
- 2.4 Numeric replies ........................................ 8
- 2.5 Wildcard expressions ................................... 9
- 3. Message Details ............................................ 9
- 3.1 Connection Registration ................................ 10
- 3.1.1 Password message .................................. 10
- 3.1.2 Nick message ...................................... 10
- 3.1.3 User message ...................................... 11
- 3.1.4 Oper message ...................................... 12
- 3.1.5 User mode message ................................. 12
- 3.1.6 Service message ................................... 13
- 3.1.7 Quit .............................................. 14
- 3.1.8 Squit ............................................. 15
- 3.2 Channel operations ..................................... 15
- 3.2.1 Join message ...................................... 16
- 3.2.2 Part message ...................................... 17
- 3.2.3 Channel mode message .............................. 18
- 3.2.4 Topic message ..................................... 19
- 3.2.5 Names message ..................................... 20
- 3.2.6 List message ...................................... 21
- 3.2.7 Invite message .................................... 21
- 3.2.8 Kick command ...................................... 22
- 3.3 Sending messages ....................................... 23
- 3.3.1 Private messages .................................. 23
- 3.3.2 Notice ............................................ 24
- 3.4 Server queries and commands ............................ 25
- 3.4.1 Motd message ...................................... 25
- 3.4.2 Lusers message .................................... 25
- 3.4.3 Version message ................................... 26
- 3.4.4 Stats message ..................................... 26
- 3.4.5 Links message ..................................... 27
- 3.4.6 Time message ...................................... 28
- 3.4.7 Connect message ................................... 28
- 3.4.8 Trace message ..................................... 29
- 3.4.9 Admin command ..................................... 30
- 3.4.10 Info command ...................................... 31
- 3.5 Service Query and Commands ............................. 31
- 3.5.1 Servlist message .................................. 31
- 3.5.2 Squery ............................................ 32
- 3.6 User based queries ..................................... 32
- 3.6.1 Who query ......................................... 32
- 3.6.2 Whois query ....................................... 33
- 3.6.3 Whowas ............................................ 34
- 3.7 Miscellaneous messages ................................. 34
- 3.7.1 Kill message ...................................... 35
- 3.7.2 Ping message ...................................... 36
- 3.7.3 Pong message ...................................... 37
- 3.7.4 Error ............................................. 37
-
-
-
-Kalt Informational [Page 2]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- 4. Optional features .......................................... 38
- 4.1 Away ................................................... 38
- 4.2 Rehash message ......................................... 39
- 4.3 Die message ............................................ 39
- 4.4 Restart message ........................................ 40
- 4.5 Summon message ......................................... 40
- 4.6 Users .................................................. 41
- 4.7 Operwall message ....................................... 41
- 4.8 Userhost message ....................................... 42
- 4.9 Ison message ........................................... 42
- 5. Replies .................................................... 43
- 5.1 Command responses ...................................... 43
- 5.2 Error Replies .......................................... 53
- 5.3 Reserved numerics ...................................... 59
- 6. Current implementations .................................... 60
- 7. Current problems ........................................... 60
- 7.1 Nicknames .............................................. 60
- 7.2 Limitation of wildcards ................................ 61
- 7.3 Security considerations ................................ 61
- 8. Current support and availability ........................... 61
- 9. Acknowledgements ........................................... 61
- 10. References ................................................ 62
- 11. Author's Address .......................................... 62
- 12. Full Copyright Statement .................................. 63
-
-1. Labels
-
- This section defines the identifiers used for the various components
- of the IRC protocol.
-
-1.1 Servers
-
- Servers are uniquely identified by their name, which has a maximum
- length of sixty three (63) characters. See the protocol grammar
- rules (section 2.3.1) for what may and may not be used in a server
- name.
-
-1.2 Clients
-
- For each client all servers MUST have the following information: a
- netwide unique identifier (whose format depends on the type of
- client) and the server which introduced the client.
-
-
-
-
-
-
-
-
-
-Kalt Informational [Page 3]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
-1.2.1 Users
-
- Each user is distinguished from other users by a unique nickname
- having a maximum length of nine (9) characters. See the protocol
- grammar rules (section 2.3.1) for what may and may not be used in a
- nickname.
-
- While the maximum length is limited to nine characters, clients
- SHOULD accept longer strings as they may become used in future
- evolutions of the protocol.
-
-1.2.1.1 Operators
-
- To allow a reasonable amount of order to be kept within the IRC
- network, a special class of users (operators) is allowed to perform
- general maintenance functions on the network. Although the powers
- granted to an operator can be considered as 'dangerous', they are
- nonetheless often necessary. Operators SHOULD be able to perform
- basic network tasks such as disconnecting and reconnecting servers as
- needed. In recognition of this need, the protocol discussed herein
- provides for operators only to be able to perform such functions.
- See sections 3.1.8 (SQUIT) and 3.4.7 (CONNECT).
-
- A more controversial power of operators is the ability to remove a
- user from the connected network by 'force', i.e., operators are able
- to close the connection between any client and server. The
- justification for this is very delicate since its abuse is both
- destructive and annoying, and its benefits close to inexistent. For
- further details on this type of action, see section 3.7.1 (KILL).
-
-1.2.2 Services
-
- Each service is distinguished from other services by a service name
- composed of a nickname and a server name. As for users, the nickname
- has a maximum length of nine (9) characters. See the protocol
- grammar rules (section 2.3.1) for what may and may not be used in a
- nickname.
-
-1.3 Channels
-
- Channels names are strings (beginning with a '&', '#', '+' or '!'
- character) of length up to fifty (50) characters. Apart from the
- requirement that the first character is either '&', '#', '+' or '!',
- the only restriction on a channel name is that it SHALL NOT contain
- any spaces (' '), a control G (^G or ASCII 7), a comma (','). Space
- is used as parameter separator and command is used as a list item
- separator by the protocol). A colon (':') can also be used as a
- delimiter for the channel mask. Channel names are case insensitive.
-
-
-
-Kalt Informational [Page 4]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- See the protocol grammar rules (section 2.3.1) for the exact syntax
- of a channel name.
-
- Each prefix characterizes a different channel type. The definition
- of the channel types is not relevant to the client-server protocol
- and thus it is beyond the scope of this document. More details can
- be found in "Internet Relay Chat: Channel Management" [IRC-CHAN].
-
-2. The IRC Client Specification
-
-2.1 Overview
-
- The protocol as described herein is for use only with client to
- server connections when the client registers as a user.
-
-2.2 Character codes
-
- No specific character set is specified. The protocol is based on a
- set of codes which are composed of eight (8) bits, making up an
- octet. Each message may be composed of any number of these octets;
- however, some octet values are used for control codes, which act as
- message delimiters.
-
- Regardless of being an 8-bit protocol, the delimiters and keywords
- are such that protocol is mostly usable from US-ASCII terminal and a
- telnet connection.
-
- Because of IRC's Scandinavian origin, the characters {}|^ are
- considered to be the lower case equivalents of the characters []\~,
- respectively. This is a critical issue when determining the
- equivalence of two nicknames or channel names.
-
-2.3 Messages
-
- Servers and clients send each other messages, which may or may not
- generate a reply. If the message contains a valid command, as
- described in later sections, the client should expect a reply as
- specified but it is not advised to wait forever for the reply; client
- to server and server to server communication is essentially
- asynchronous by nature.
-
- Each IRC message may consist of up to three main parts: the prefix
- (OPTIONAL), the command, and the command parameters (maximum of
- fifteen (15)). The prefix, command, and all parameters are separated
- by one ASCII space character (0x20) each.
-
-
-
-
-
-
-Kalt Informational [Page 5]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- The presence of a prefix is indicated with a single leading ASCII
- colon character (':', 0x3b), which MUST be the first character of the
- message itself. There MUST be NO gap (whitespace) between the colon
- and the prefix. The prefix is used by servers to indicate the true
- origin of the message. If the prefix is missing from the message, it
- is assumed to have originated from the connection from which it was
- received from. Clients SHOULD NOT use a prefix when sending a
- message; if they use one, the only valid prefix is the registered
- nickname associated with the client.
-
- The command MUST either be a valid IRC command or a three (3) digit
- number represented in ASCII text.
-
- IRC messages are always lines of characters terminated with a CR-LF
- (Carriage Return - Line Feed) pair, and these messages SHALL NOT
- exceed 512 characters in length, counting all characters including
- the trailing CR-LF. Thus, there are 510 characters maximum allowed
- for the command and its parameters. There is no provision for
- continuation of message lines. See section 6 for more details about
- current implementations.
-
-2.3.1 Message format in Augmented BNF
-
- The protocol messages must be extracted from the contiguous stream of
- octets. The current solution is to designate two characters, CR and
- LF, as message separators. Empty messages are silently ignored,
- which permits use of the sequence CR-LF between messages without
- extra problems.
-
- The extracted message is parsed into the components <prefix>,
- <command> and list of parameters (<params>).
-
- The Augmented BNF representation for this is:
-
- message = [ ":" prefix SPACE ] command [ params ] crlf
- prefix = servername / ( nickname [ [ "!" user ] "@" host ] )
- command = 1*letter / 3digit
- params = *14( SPACE middle ) [ SPACE ":" trailing ]
- =/ 14( SPACE middle ) [ SPACE [ ":" ] trailing ]
-
- nospcrlfcl = %x01-09 / %x0B-0C / %x0E-1F / %x21-39 / %x3B-FF
- ; any octet except NUL, CR, LF, " " and ":"
- middle = nospcrlfcl *( ":" / nospcrlfcl )
- trailing = *( ":" / " " / nospcrlfcl )
-
- SPACE = %x20 ; space character
- crlf = %x0D %x0A ; "carriage return" "linefeed"
-
-
-
-
-Kalt Informational [Page 6]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- NOTES:
- 1) After extracting the parameter list, all parameters are equal
- whether matched by <middle> or <trailing>. <trailing> is just a
- syntactic trick to allow SPACE within the parameter.
-
- 2) The NUL (%x00) character is not special in message framing, and
- basically could end up inside a parameter, but it would cause
- extra complexities in normal C string handling. Therefore, NUL
- is not allowed within messages.
-
- Most protocol messages specify additional semantics and syntax for
- the extracted parameter strings dictated by their position in the
- list. For example, many server commands will assume that the first
- parameter after the command is the list of targets, which can be
- described with:
-
- target = nickname / server
- msgtarget = msgto *( "," msgto )
- msgto = channel / ( user [ "%" host ] "@" servername )
- msgto =/ ( user "%" host ) / targetmask
- msgto =/ nickname / ( nickname "!" user "@" host )
- channel = ( "#" / "+" / ( "!" channelid ) / "&" ) chanstring
- [ ":" chanstring ]
- servername = hostname
- host = hostname / hostaddr
- hostname = shortname *( "." shortname )
- shortname = ( letter / digit ) *( letter / digit / "-" )
- *( letter / digit )
- ; as specified in RFC 1123 [HNAME]
- hostaddr = ip4addr / ip6addr
- ip4addr = 1*3digit "." 1*3digit "." 1*3digit "." 1*3digit
- ip6addr = 1*hexdigit 7( ":" 1*hexdigit )
- ip6addr =/ "0:0:0:0:0:" ( "0" / "FFFF" ) ":" ip4addr
- nickname = ( letter / special ) *8( letter / digit / special / "-" )
- targetmask = ( "$" / "#" ) mask
- ; see details on allowed masks in section 3.3.1
- chanstring = %x01-07 / %x08-09 / %x0B-0C / %x0E-1F / %x21-2B
- chanstring =/ %x2D-39 / %x3B-FF
- ; any octet except NUL, BELL, CR, LF, " ", "," and ":"
- channelid = 5( %x41-5A / digit ) ; 5( A-Z / 0-9 )
-
-
-
-
-
-
-
-
-
-
-
-Kalt Informational [Page 7]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- Other parameter syntaxes are:
-
- user = 1*( %x01-09 / %x0B-0C / %x0E-1F / %x21-3F / %x41-FF )
- ; any octet except NUL, CR, LF, " " and "@"
- key = 1*23( %x01-05 / %x07-08 / %x0C / %x0E-1F / %x21-7F )
- ; any 7-bit US_ASCII character,
- ; except NUL, CR, LF, FF, h/v TABs, and " "
- letter = %x41-5A / %x61-7A ; A-Z / a-z
- digit = %x30-39 ; 0-9
- hexdigit = digit / "A" / "B" / "C" / "D" / "E" / "F"
- special = %x5B-60 / %x7B-7D
- ; "[", "]", "\", "`", "_", "^", "{", "|", "}"
-
- NOTES:
- 1) The <hostaddr> syntax is given here for the sole purpose of
- indicating the format to follow for IP addresses. This
- reflects the fact that the only available implementations of
- this protocol uses TCP/IP as underlying network protocol but is
- not meant to prevent other protocols to be used.
-
- 2) <hostname> has a maximum length of 63 characters. This is a
- limitation of the protocol as internet hostnames (in
- particular) can be longer. Such restriction is necessary
- because IRC messages are limited to 512 characters in length.
- Clients connecting from a host which name is longer than 63
- characters are registered using the host (numeric) address
- instead of the host name.
-
- 3) Some parameters used in the following sections of this
- documents are not defined here as there is nothing specific
- about them besides the name that is used for convenience.
- These parameters follow the general syntax defined for
- <params>.
-
-2.4 Numeric replies
-
- Most of the messages sent to the server generate a reply of some
- sort. The most common reply is the numeric reply, used for both
- errors and normal replies. The numeric reply MUST be sent as one
- message consisting of the sender prefix, the three-digit numeric, and
- the target of the reply. A numeric reply is not allowed to originate
- from a client. In all other respects, a numeric reply is just like a
- normal message, except that the keyword is made up of 3 numeric
- digits rather than a string of letters. A list of different replies
- is supplied in section 5 (Replies).
-
-
-
-
-
-
-Kalt Informational [Page 8]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
-2.5 Wildcard expressions
-
- When wildcards are allowed in a string, it is referred as a "mask".
-
- For string matching purposes, the protocol allows the use of two
- special characters: '?' (%x3F) to match one and only one character,
- and '*' (%x2A) to match any number of any characters. These two
- characters can be escaped using the character '\' (%x5C).
-
- The Augmented BNF syntax for this is:
-
- mask = *( nowild / noesc wildone / noesc wildmany )
- wildone = %x3F
- wildmany = %x2A
- nowild = %x01-29 / %x2B-3E / %x40-FF
- ; any octet except NUL, "*", "?"
- noesc = %x01-5B / %x5D-FF
- ; any octet except NUL and "\"
- matchone = %x01-FF
- ; matches wildone
- matchmany = *matchone
- ; matches wildmany
-
- Examples:
-
- a?c ; Matches any string of 3 characters in length starting
- with "a" and ending with "c"
-
- a*c ; Matches any string of at least 2 characters in length
- starting with "a" and ending with "c"
-
-3. Message Details
-
- On the following pages there are descriptions of each message
- recognized by the IRC server and client. All commands described in
- this section MUST be implemented by any server for this protocol.
-
- Where the reply ERR_NOSUCHSERVER is returned, it means that the
- target of the message could not be found. The server MUST NOT send
- any other replies after this error for that command.
-
- The server to which a client is connected is required to parse the
- complete message, and return any appropriate errors.
-
- If multiple parameters is presented, then each MUST be checked for
- validity and appropriate responses MUST be sent back to the client.
- In the case of incorrect messages which use parameter lists with
- comma as an item separator, a reply MUST be sent for each item.
-
-
-
-Kalt Informational [Page 9]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
-3.1 Connection Registration
-
- The commands described here are used to register a connection with an
- IRC server as a user as well as to correctly disconnect.
-
- A "PASS" command is not required for a client connection to be
- registered, but it MUST precede the latter of the NICK/USER
- combination (for a user connection) or the SERVICE command (for a
- service connection). The RECOMMENDED order for a client to register
- is as follows:
-
- 1. Pass message
- 2. Nick message 2. Service message
- 3. User message
-
- Upon success, the client will receive an RPL_WELCOME (for users) or
- RPL_YOURESERVICE (for services) message indicating that the
- connection is now registered and known the to the entire IRC network.
- The reply message MUST contain the full client identifier upon which
- it was registered.
-
-3.1.1 Password message
-
- Command: PASS
- Parameters: <password>
-
- The PASS command is used to set a 'connection password'. The
- optional password can and MUST be set before any attempt to register
- the connection is made. Currently this requires that user send a
- PASS command before sending the NICK/USER combination.
-
- Numeric Replies:
-
- ERR_NEEDMOREPARAMS ERR_ALREADYREGISTRED
-
- Example:
-
- PASS secretpasswordhere
-
-3.1.2 Nick message
-
-
- Command: NICK
- Parameters: <nickname>
-
- NICK command is used to give user a nickname or change the existing
- one.
-
-
-
-
-Kalt Informational [Page 10]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- Numeric Replies:
-
- ERR_NONICKNAMEGIVEN ERR_ERRONEUSNICKNAME
- ERR_NICKNAMEINUSE ERR_NICKCOLLISION
- ERR_UNAVAILRESOURCE ERR_RESTRICTED
-
- Examples:
-
- NICK Wiz ; Introducing new nick "Wiz" if session is
- still unregistered, or user changing his
- nickname to "Wiz"
-
- :WiZ!jto@tolsun.oulu.fi NICK Kilroy
- ; Server telling that WiZ changed his
- nickname to Kilroy.
-
-3.1.3 User message
-
- Command: USER
- Parameters: <user> <mode> <unused> <realname>
-
- The USER command is used at the beginning of connection to specify
- the username, hostname and realname of a new user.
-
- The <mode> parameter should be a numeric, and can be used to
- automatically set user modes when registering with the server. This
- parameter is a bitmask, with only 2 bits having any signification: if
- the bit 2 is set, the user mode 'w' will be set and if the bit 3 is
- set, the user mode 'i' will be set. (See Section 3.1.5 "User
- Modes").
-
- The <realname> may contain space characters.
-
- Numeric Replies:
-
- ERR_NEEDMOREPARAMS ERR_ALREADYREGISTRED
-
- Example:
-
- USER guest 0 * :Ronnie Reagan ; User registering themselves with a
- username of "guest" and real name
- "Ronnie Reagan".
-
- USER guest 8 * :Ronnie Reagan ; User registering themselves with a
- username of "guest" and real name
- "Ronnie Reagan", and asking to be set
- invisible.
-
-
-
-
-Kalt Informational [Page 11]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
-3.1.4 Oper message
-
- Command: OPER
- Parameters: <name> <password>
-
- A normal user uses the OPER command to obtain operator privileges.
- The combination of <name> and <password> are REQUIRED to gain
- Operator privileges. Upon success, the user will receive a MODE
- message (see section 3.1.5) indicating the new user modes.
-
- Numeric Replies:
-
- ERR_NEEDMOREPARAMS RPL_YOUREOPER
- ERR_NOOPERHOST ERR_PASSWDMISMATCH
-
- Example:
-
- OPER foo bar ; Attempt to register as an operator
- using a username of "foo" and "bar"
- as the password.
-
-3.1.5 User mode message
-
- Command: MODE
- Parameters: <nickname>
- *( ( "+" / "-" ) *( "i" / "w" / "o" / "O" / "r" ) )
-
- The user MODE's are typically changes which affect either how the
- client is seen by others or what 'extra' messages the client is sent.
-
- A user MODE command MUST only be accepted if both the sender of the
- message and the nickname given as a parameter are both the same. If
- no other parameter is given, then the server will return the current
- settings for the nick.
-
- The available modes are as follows:
-
- a - user is flagged as away;
- i - marks a users as invisible;
- w - user receives wallops;
- r - restricted user connection;
- o - operator flag;
- O - local operator flag;
- s - marks a user for receipt of server notices.
-
- Additional modes may be available later on.
-
-
-
-
-
-Kalt Informational [Page 12]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- The flag 'a' SHALL NOT be toggled by the user using the MODE command,
- instead use of the AWAY command is REQUIRED.
-
- If a user attempts to make themselves an operator using the "+o" or
- "+O" flag, the attempt SHOULD be ignored as users could bypass the
- authentication mechanisms of the OPER command. There is no
- restriction, however, on anyone `deopping' themselves (using "-o" or
- "-O").
-
- On the other hand, if a user attempts to make themselves unrestricted
- using the "-r" flag, the attempt SHOULD be ignored. There is no
- restriction, however, on anyone `deopping' themselves (using "+r").
- This flag is typically set by the server upon connection for
- administrative reasons. While the restrictions imposed are left up
- to the implementation, it is typical that a restricted user not be
- allowed to change nicknames, nor make use of the channel operator
- status on channels.
-
- The flag 's' is obsolete but MAY still be used.
-
- Numeric Replies:
-
- ERR_NEEDMOREPARAMS ERR_USERSDONTMATCH
- ERR_UMODEUNKNOWNFLAG RPL_UMODEIS
-
- Examples:
-
- MODE WiZ -w ; Command by WiZ to turn off
- reception of WALLOPS messages.
-
- MODE Angel +i ; Command from Angel to make herself
- invisible.
-
- MODE WiZ -o ; WiZ 'deopping' (removing operator
- status).
-
-3.1.6 Service message
-
- Command: SERVICE
- Parameters: <nickname> <reserved> <distribution> <type>
- <reserved> <info>
-
- The SERVICE command to register a new service. Command parameters
- specify the service nickname, distribution, type and info of a new
- service.
-
-
-
-
-
-
-Kalt Informational [Page 13]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- The <distribution> parameter is used to specify the visibility of a
- service. The service may only be known to servers which have a name
- matching the distribution. For a matching server to have knowledge
- of the service, the network path between that server and the server
- on which the service is connected MUST be composed of servers which
- names all match the mask.
-
- The <type> parameter is currently reserved for future usage.
-
- Numeric Replies:
-
- ERR_ALREADYREGISTRED ERR_NEEDMOREPARAMS
- ERR_ERRONEUSNICKNAME
- RPL_YOURESERVICE RPL_YOURHOST
- RPL_MYINFO
-
- Example:
-
- SERVICE dict * *.fr 0 0 :French Dictionary ; Service registering
- itself with a name of "dict". This
- service will only be available on
- servers which name matches "*.fr".
-
-3.1.7 Quit
-
- Command: QUIT
- Parameters: [ <Quit Message> ]
-
- A client session is terminated with a quit message. The server
- acknowledges this by sending an ERROR message to the client.
-
- Numeric Replies:
-
- None.
-
- Example:
-
- QUIT :Gone to have lunch ; Preferred message format.
-
- :syrk!kalt@millennium.stealth.net QUIT :Gone to have lunch ; User
- syrk has quit IRC to have lunch.
-
-
-
-
-
-
-
-
-
-
-Kalt Informational [Page 14]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
-3.1.8 Squit
-
- Command: SQUIT
- Parameters: <server> <comment>
-
- The SQUIT command is available only to operators. It is used to
- disconnect server links. Also servers can generate SQUIT messages on
- error conditions. A SQUIT message may also target a remote server
- connection. In this case, the SQUIT message will simply be sent to
- the remote server without affecting the servers in between the
- operator and the remote server.
-
- The <comment> SHOULD be supplied by all operators who execute a SQUIT
- for a remote server. The server ordered to disconnect its peer
- generates a WALLOPS message with <comment> included, so that other
- users may be aware of the reason of this action.
-
- Numeric replies:
-
- ERR_NOPRIVILEGES ERR_NOSUCHSERVER
- ERR_NEEDMOREPARAMS
-
- Examples:
-
- SQUIT tolsun.oulu.fi :Bad Link ? ; Command to uplink of the server
- tolson.oulu.fi to terminate its
- connection with comment "Bad Link".
-
- :Trillian SQUIT cm22.eng.umd.edu :Server out of control ; Command
- from Trillian from to disconnect
- "cm22.eng.umd.edu" from the net with
- comment "Server out of control".
-
-3.2 Channel operations
-
- This group of messages is concerned with manipulating channels, their
- properties (channel modes), and their contents (typically users).
- For this reason, these messages SHALL NOT be made available to
- services.
-
- All of these messages are requests which will or will not be granted
- by the server. The server MUST send a reply informing the user
- whether the request was granted, denied or generated an error. When
- the server grants the request, the message is typically sent back
- (eventually reformatted) to the user with the prefix set to the user
- itself.
-
-
-
-
-
-Kalt Informational [Page 15]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- The rules governing how channels are managed are enforced by the
- servers. These rules are beyond the scope of this document. More
- details are found in "Internet Relay Chat: Channel Management" [IRC-
- CHAN].
-
-3.2.1 Join message
-
- Command: JOIN
- Parameters: ( <channel> *( "," <channel> ) [ <key> *( "," <key> ) ] )
- / "0"
-
- The JOIN command is used by a user to request to start listening to
- the specific channel. Servers MUST be able to parse arguments in the
- form of a list of target, but SHOULD NOT use lists when sending JOIN
- messages to clients.
-
- Once a user has joined a channel, he receives information about
- all commands his server receives affecting the channel. This
- includes JOIN, MODE, KICK, PART, QUIT and of course PRIVMSG/NOTICE.
- This allows channel members to keep track of the other channel
- members, as well as channel modes.
-
- If a JOIN is successful, the user receives a JOIN message as
- confirmation and is then sent the channel's topic (using RPL_TOPIC) and
- the list of users who are on the channel (using RPL_NAMREPLY), which
- MUST include the user joining.
-
- Note that this message accepts a special argument ("0"), which is
- a special request to leave all channels the user is currently a member
- of. The server will process this message as if the user had sent
- a PART command (See Section 3.2.2) for each channel he is a member
- of.
-
- Numeric Replies:
-
- ERR_NEEDMOREPARAMS ERR_BANNEDFROMCHAN
- ERR_INVITEONLYCHAN ERR_BADCHANNELKEY
- ERR_CHANNELISFULL ERR_BADCHANMASK
- ERR_NOSUCHCHANNEL ERR_TOOMANYCHANNELS
- ERR_TOOMANYTARGETS ERR_UNAVAILRESOURCE
- RPL_TOPIC
-
- Examples:
-
- JOIN #foobar ; Command to join channel #foobar.
-
- JOIN &foo fubar ; Command to join channel &foo using
- key "fubar".
-
-
-
-Kalt Informational [Page 16]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- JOIN #foo,&bar fubar ; Command to join channel #foo using
- key "fubar" and &bar using no key.
-
- JOIN #foo,#bar fubar,foobar ; Command to join channel #foo using
- key "fubar", and channel #bar using
- key "foobar".
-
- JOIN #foo,#bar ; Command to join channels #foo and
- #bar.
-
- JOIN 0 ; Leave all currently joined
- channels.
-
- :WiZ!jto@tolsun.oulu.fi JOIN #Twilight_zone ; JOIN message from WiZ
- on channel #Twilight_zone
-
-3.2.2 Part message
-
- Command: PART
- Parameters: <channel> *( "," <channel> ) [ <Part Message> ]
-
- The PART command causes the user sending the message to be removed
- from the list of active members for all given channels listed in the
- parameter string. If a "Part Message" is given, this will be sent
- instead of the default message, the nickname. This request is always
- granted by the server.
-
- Servers MUST be able to parse arguments in the form of a list of
- target, but SHOULD NOT use lists when sending PART messages to
- clients.
-
- Numeric Replies:
-
- ERR_NEEDMOREPARAMS ERR_NOSUCHCHANNEL
- ERR_NOTONCHANNEL
-
- Examples:
-
- PART #twilight_zone ; Command to leave channel
- "#twilight_zone"
-
- PART #oz-ops,&group5 ; Command to leave both channels
- "&group5" and "#oz-ops".
-
- :WiZ!jto@tolsun.oulu.fi PART #playzone :I lost
- ; User WiZ leaving channel
- "#playzone" with the message "I
- lost".
-
-
-
-Kalt Informational [Page 17]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
-3.2.3 Channel mode message
-
- Command: MODE
- Parameters: <channel> *( ( "-" / "+" ) *<modes> *<modeparams> )
-
- The MODE command is provided so that users may query and change the
- characteristics of a channel. For more details on available modes
- and their uses, see "Internet Relay Chat: Channel Management" [IRC-
- CHAN]. Note that there is a maximum limit of three (3) changes per
- command for modes that take a parameter.
-
- Numeric Replies:
-
- ERR_NEEDMOREPARAMS ERR_KEYSET
- ERR_NOCHANMODES ERR_CHANOPRIVSNEEDED
- ERR_USERNOTINCHANNEL ERR_UNKNOWNMODE
- RPL_CHANNELMODEIS
- RPL_BANLIST RPL_ENDOFBANLIST
- RPL_EXCEPTLIST RPL_ENDOFEXCEPTLIST
- RPL_INVITELIST RPL_ENDOFINVITELIST
- RPL_UNIQOPIS
-
- The following examples are given to help understanding the syntax of
- the MODE command, but refer to modes defined in "Internet Relay Chat:
- Channel Management" [IRC-CHAN].
-
- Examples:
-
- MODE #Finnish +imI *!*@*.fi ; Command to make #Finnish channel
- moderated and 'invite-only' with user
- with a hostname matching *.fi
- automatically invited.
-
- MODE #Finnish +o Kilroy ; Command to give 'chanop' privileges
- to Kilroy on channel #Finnish.
-
- MODE #Finnish +v Wiz ; Command to allow WiZ to speak on
- #Finnish.
-
- MODE #Fins -s ; Command to remove 'secret' flag
- from channel #Fins.
-
- MODE #42 +k oulu ; Command to set the channel key to
- "oulu".
-
- MODE #42 -k oulu ; Command to remove the "oulu"
- channel key on channel "#42".
-
-
-
-
-Kalt Informational [Page 18]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- MODE #eu-opers +l 10 ; Command to set the limit for the
- number of users on channel
- "#eu-opers" to 10.
-
- :WiZ!jto@tolsun.oulu.fi MODE #eu-opers -l
- ; User "WiZ" removing the limit for
- the number of users on channel "#eu-
- opers".
-
- MODE &oulu +b ; Command to list ban masks set for
- the channel "&oulu".
-
- MODE &oulu +b *!*@* ; Command to prevent all users from
- joining.
-
- MODE &oulu +b *!*@*.edu +e *!*@*.bu.edu
- ; Command to prevent any user from a
- hostname matching *.edu from joining,
- except if matching *.bu.edu
-
- MODE #bu +be *!*@*.edu *!*@*.bu.edu
- ; Comment to prevent any user from a
- hostname matching *.edu from joining,
- except if matching *.bu.edu
-
- MODE #meditation e ; Command to list exception masks set
- for the channel "#meditation".
-
- MODE #meditation I ; Command to list invitations masks
- set for the channel "#meditation".
-
- MODE !12345ircd O ; Command to ask who the channel
- creator for "!12345ircd" is
-
-3.2.4 Topic message
-
- Command: TOPIC
- Parameters: <channel> [ <topic> ]
-
- The TOPIC command is used to change or view the topic of a channel.
- The topic for channel <channel> is returned if there is no <topic>
- given. If the <topic> parameter is present, the topic for that
- channel will be changed, if this action is allowed for the user
- requesting it. If the <topic> parameter is an empty string, the
- topic for that channel will be removed.
-
-
-
-
-
-
-Kalt Informational [Page 19]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- Numeric Replies:
-
- ERR_NEEDMOREPARAMS ERR_NOTONCHANNEL
- RPL_NOTOPIC RPL_TOPIC
- ERR_CHANOPRIVSNEEDED ERR_NOCHANMODES
-
- Examples:
-
- :WiZ!jto@tolsun.oulu.fi TOPIC #test :New topic ; User Wiz setting the
- topic.
-
- TOPIC #test :another topic ; Command to set the topic on #test
- to "another topic".
-
- TOPIC #test : ; Command to clear the topic on
- #test.
-
- TOPIC #test ; Command to check the topic for
- #test.
-
-3.2.5 Names message
-
- Command: NAMES
- Parameters: [ <channel> *( "," <channel> ) [ <target> ] ]
-
- By using the NAMES command, a user can list all nicknames that are
- visible to him. For more details on what is visible and what is not,
- see "Internet Relay Chat: Channel Management" [IRC-CHAN]. The
- <channel> parameter specifies which channel(s) to return information
- about. There is no error reply for bad channel names.
-
- If no <channel> parameter is given, a list of all channels and their
- occupants is returned. At the end of this list, a list of users who
- are visible but either not on any channel or not on a visible channel
- are listed as being on `channel' "*".
-
- If the <target> parameter is specified, the request is forwarded to
- that server which will generate the reply.
-
- Wildcards are allowed in the <target> parameter.
-
- Numerics:
-
- ERR_TOOMANYMATCHES ERR_NOSUCHSERVER
- RPL_NAMREPLY RPL_ENDOFNAMES
-
-
-
-
-
-
-Kalt Informational [Page 20]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- Examples:
-
- NAMES #twilight_zone,#42 ; Command to list visible users on
- #twilight_zone and #42
-
- NAMES ; Command to list all visible
- channels and users
-
-3.2.6 List message
-
- Command: LIST
- Parameters: [ <channel> *( "," <channel> ) [ <target> ] ]
-
- The list command is used to list channels and their topics. If the
- <channel> parameter is used, only the status of that channel is
- displayed.
-
- If the <target> parameter is specified, the request is forwarded to
- that server which will generate the reply.
-
- Wildcards are allowed in the <target> parameter.
-
- Numeric Replies:
-
- ERR_TOOMANYMATCHES ERR_NOSUCHSERVER
- RPL_LIST RPL_LISTEND
-
- Examples:
-
- LIST ; Command to list all channels.
-
- LIST #twilight_zone,#42 ; Command to list channels
- #twilight_zone and #42
-
-3.2.7 Invite message
-
- Command: INVITE
- Parameters: <nickname> <channel>
-
- The INVITE command is used to invite a user to a channel. The
- parameter <nickname> is the nickname of the person to be invited to
- the target channel <channel>. There is no requirement that the
- channel the target user is being invited to must exist or be a valid
- channel. However, if the channel exists, only members of the channel
- are allowed to invite other users. When the channel has invite-only
- flag set, only channel operators may issue INVITE command.
-
-
-
-
-
-Kalt Informational [Page 21]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- Only the user inviting and the user being invited will receive
- notification of the invitation. Other channel members are not
- notified. (This is unlike the MODE changes, and is occasionally the
- source of trouble for users.)
-
- Numeric Replies:
-
- ERR_NEEDMOREPARAMS ERR_NOSUCHNICK
- ERR_NOTONCHANNEL ERR_USERONCHANNEL
- ERR_CHANOPRIVSNEEDED
- RPL_INVITING RPL_AWAY
-
- Examples:
-
- :Angel!wings@irc.org INVITE Wiz #Dust
-
- ; Message to WiZ when he has been
- invited by user Angel to channel
- #Dust
-
- INVITE Wiz #Twilight_Zone ; Command to invite WiZ to
- #Twilight_zone
-
-3.2.8 Kick command
-
- Command: KICK
- Parameters: <channel> *( "," <channel> ) <user> *( "," <user> )
- [<comment>]
-
- The KICK command can be used to request the forced removal of a user
- from a channel. It causes the <user> to PART from the <channel> by
- force. For the message to be syntactically correct, there MUST be
- either one channel parameter and multiple user parameter, or as many
- channel parameters as there are user parameters. If a "comment" is
- given, this will be sent instead of the default message, the nickname
- of the user issuing the KICK.
-
- The server MUST NOT send KICK messages with multiple channels or
- users to clients. This is necessarily to maintain backward
- compatibility with old client software.
-
- Numeric Replies:
-
- ERR_NEEDMOREPARAMS ERR_NOSUCHCHANNEL
- ERR_BADCHANMASK ERR_CHANOPRIVSNEEDED
- ERR_USERNOTINCHANNEL ERR_NOTONCHANNEL
-
-
-
-
-
-Kalt Informational [Page 22]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- Examples:
-
- KICK &Melbourne Matthew ; Command to kick Matthew from
- &Melbourne
-
- KICK #Finnish John :Speaking English
- ; Command to kick John from #Finnish
- using "Speaking English" as the
- reason (comment).
-
- :WiZ!jto@tolsun.oulu.fi KICK #Finnish John
- ; KICK message on channel #Finnish
- from WiZ to remove John from channel
-
-3.3 Sending messages
-
- The main purpose of the IRC protocol is to provide a base for clients
- to communicate with each other. PRIVMSG, NOTICE and SQUERY
- (described in Section 3.5 on Service Query and Commands) are the only
- messages available which actually perform delivery of a text message
- from one client to another - the rest just make it possible and try
- to ensure it happens in a reliable and structured manner.
-
-3.3.1 Private messages
-
- Command: PRIVMSG
- Parameters: <msgtarget> <text to be sent>
-
- PRIVMSG is used to send private messages between users, as well as to
- send messages to channels. <msgtarget> is usually the nickname of
- the recipient of the message, or a channel name.
-
- The <msgtarget> parameter may also be a host mask (#<mask>) or server
- mask ($<mask>). In both cases the server will only send the PRIVMSG
- to those who have a server or host matching the mask. The mask MUST
- have at least 1 (one) "." in it and no wildcards following the last
- ".". This requirement exists to prevent people sending messages to
- "#*" or "$*", which would broadcast to all users. Wildcards are the
- '*' and '?' characters. This extension to the PRIVMSG command is
- only available to operators.
-
- Numeric Replies:
-
- ERR_NORECIPIENT ERR_NOTEXTTOSEND
- ERR_CANNOTSENDTOCHAN ERR_NOTOPLEVEL
- ERR_WILDTOPLEVEL ERR_TOOMANYTARGETS
- ERR_NOSUCHNICK
- RPL_AWAY
-
-
-
-Kalt Informational [Page 23]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- Examples:
-
- :Angel!wings@irc.org PRIVMSG Wiz :Are you receiving this message ?
- ; Message from Angel to Wiz.
-
- PRIVMSG Angel :yes I'm receiving it !
- ; Command to send a message to Angel.
-
- PRIVMSG jto@tolsun.oulu.fi :Hello !
- ; Command to send a message to a user
- on server tolsun.oulu.fi with
- username of "jto".
-
- PRIVMSG kalt%millennium.stealth.net@irc.stealth.net :Are you a frog?
- ; Message to a user on server
- irc.stealth.net with username of
- "kalt", and connected from the host
- millennium.stealth.net.
-
- PRIVMSG kalt%millennium.stealth.net :Do you like cheese?
- ; Message to a user on the local
- server with username of "kalt", and
- connected from the host
- millennium.stealth.net.
-
- PRIVMSG Wiz!jto@tolsun.oulu.fi :Hello !
- ; Message to the user with nickname
- Wiz who is connected from the host
- tolsun.oulu.fi and has the username
- "jto".
-
- PRIVMSG $*.fi :Server tolsun.oulu.fi rebooting.
- ; Message to everyone on a server
- which has a name matching *.fi.
-
- PRIVMSG #*.edu :NSFNet is undergoing work, expect interruptions
- ; Message to all users who come from
- a host which has a name matching
- *.edu.
-
-3.3.2 Notice
-
- Command: NOTICE
- Parameters: <msgtarget> <text>
-
- The NOTICE command is used similarly to PRIVMSG. The difference
- between NOTICE and PRIVMSG is that automatic replies MUST NEVER be
- sent in response to a NOTICE message. This rule applies to servers
-
-
-
-Kalt Informational [Page 24]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- too - they MUST NOT send any error reply back to the client on
- receipt of a notice. The object of this rule is to avoid loops
- between clients automatically sending something in response to
- something it received.
-
- This command is available to services as well as users.
-
- This is typically used by services, and automatons (clients with
- either an AI or other interactive program controlling their actions).
-
- See PRIVMSG for more details on replies and examples.
-
-3.4 Server queries and commands
-
- The server query group of commands has been designed to return
- information about any server which is connected to the network.
-
- In these queries, where a parameter appears as <target>, wildcard
- masks are usually valid. For each parameter, however, only one query
- and set of replies is to be generated. In most cases, if a nickname
- is given, it will mean the server to which the user is connected.
-
- These messages typically have little value for services, it is
- therefore RECOMMENDED to forbid services from using them.
-
-3.4.1 Motd message
-
- Command: MOTD
- Parameters: [ <target> ]
-
- The MOTD command is used to get the "Message Of The Day" of the given
- server, or current server if <target> is omitted.
-
- Wildcards are allowed in the <target> parameter.
-
- Numeric Replies:
- RPL_MOTDSTART RPL_MOTD
- RPL_ENDOFMOTD ERR_NOMOTD
-
-3.4.2 Lusers message
-
- Command: LUSERS
- Parameters: [ <mask> [ <target> ] ]
-
- The LUSERS command is used to get statistics about the size of the
- IRC network. If no parameter is given, the reply will be about the
- whole net. If a <mask> is specified, then the reply will only
-
-
-
-
-Kalt Informational [Page 25]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- concern the part of the network formed by the servers matching the
- mask. Finally, if the <target> parameter is specified, the request
- is forwarded to that server which will generate the reply.
-
- Wildcards are allowed in the <target> parameter.
-
- Numeric Replies:
-
- RPL_LUSERCLIENT RPL_LUSEROP
- RPL_LUSERUNKOWN RPL_LUSERCHANNELS
- RPL_LUSERME ERR_NOSUCHSERVER
-
-3.4.3 Version message
-
- Command: VERSION
- Parameters: [ <target> ]
-
- The VERSION command is used to query the version of the server
- program. An optional parameter <target> is used to query the version
- of the server program which a client is not directly connected to.
-
- Wildcards are allowed in the <target> parameter.
-
- Numeric Replies:
-
- ERR_NOSUCHSERVER RPL_VERSION
-
- Examples:
-
- VERSION tolsun.oulu.fi ; Command to check the version of
- server "tolsun.oulu.fi".
-
-3.4.4 Stats message
-
- Command: STATS
- Parameters: [ <query> [ <target> ] ]
-
- The stats command is used to query statistics of certain server. If
- <query> parameter is omitted, only the end of stats reply is sent
- back.
-
- A query may be given for any single letter which is only checked by
- the destination server and is otherwise passed on by intermediate
- servers, ignored and unaltered.
-
- Wildcards are allowed in the <target> parameter.
-
-
-
-
-
-Kalt Informational [Page 26]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- Except for the ones below, the list of valid queries is
- implementation dependent. The standard queries below SHOULD be
- supported by the server:
-
- l - returns a list of the server's connections, showing how
- long each connection has been established and the
- traffic over that connection in Kbytes and messages for
- each direction;
- m - returns the usage count for each of commands supported
- by the server; commands for which the usage count is
- zero MAY be omitted;
- o - returns a list of configured privileged users,
- operators;
- u - returns a string showing how long the server has been
- up.
-
- It is also RECOMMENDED that client and server access configuration be
- published this way.
-
- Numeric Replies:
-
- ERR_NOSUCHSERVER
- RPL_STATSLINKINFO RPL_STATSUPTIME
- RPL_STATSCOMMANDS RPL_STATSOLINE
- RPL_ENDOFSTATS
-
- Examples:
-
- STATS m ; Command to check the command usage
- for the server you are connected to
-
-3.4.5 Links message
-
- Command: LINKS
- Parameters: [ [ <remote server> ] <server mask> ]
-
- With LINKS, a user can list all servernames, which are known by the
- server answering the query. The returned list of servers MUST match
- the mask, or if no mask is given, the full list is returned.
-
- If <remote server> is given in addition to <server mask>, the LINKS
- command is forwarded to the first server found that matches that name
- (if any), and that server is then required to answer the query.
-
- Numeric Replies:
-
- ERR_NOSUCHSERVER
- RPL_LINKS RPL_ENDOFLINKS
-
-
-
-Kalt Informational [Page 27]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- Examples:
-
- LINKS *.au ; Command to list all servers which
- have a name that matches *.au;
-
- LINKS *.edu *.bu.edu ; Command to list servers matching
- *.bu.edu as seen by the first server
- matching *.edu.
-
-3.4.6 Time message
-
- Command: TIME
- Parameters: [ <target> ]
-
- The time command is used to query local time from the specified
- server. If the <target> parameter is not given, the server receiving
- the command must reply to the query.
-
- Wildcards are allowed in the <target> parameter.
-
- Numeric Replies:
-
- ERR_NOSUCHSERVER RPL_TIME
-
- Examples:
- TIME tolsun.oulu.fi ; check the time on the server
- "tolson.oulu.fi"
-
-3.4.7 Connect message
-
- Command: CONNECT
- Parameters: <target server> <port> [ <remote server> ]
-
- The CONNECT command can be used to request a server to try to
- establish a new connection to another server immediately. CONNECT is
- a privileged command and SHOULD be available only to IRC Operators.
- If a <remote server> is given and its mask doesn't match name of the
- parsing server, the CONNECT attempt is sent to the first match of
- remote server. Otherwise the CONNECT attempt is made by the server
- processing the request.
-
- The server receiving a remote CONNECT command SHOULD generate a
- WALLOPS message describing the source and target of the request.
-
- Numeric Replies:
-
- ERR_NOSUCHSERVER ERR_NOPRIVILEGES
- ERR_NEEDMOREPARAMS
-
-
-
-Kalt Informational [Page 28]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- Examples:
-
- CONNECT tolsun.oulu.fi 6667 ; Command to attempt to connect local
- server to tolsun.oulu.fi on port 6667
-
-3.4.8 Trace message
-
- Command: TRACE
- Parameters: [ <target> ]
-
- TRACE command is used to find the route to specific server and
- information about its peers. Each server that processes this command
- MUST report to the sender about it. The replies from pass-through
- links form a chain, which shows route to destination. After sending
- this reply back, the query MUST be sent to the next server until
- given <target> server is reached.
-
- TRACE command is used to find the route to specific server. Each
- server that processes this message MUST tell the sender about it by
- sending a reply indicating it is a pass-through link, forming a chain
- of replies. After sending this reply back, it MUST then send the
- TRACE message to the next server until given server is reached. If
- the <target> parameter is omitted, it is RECOMMENDED that TRACE
- command sends a message to the sender telling which servers the local
- server has direct connection to.
-
- If the destination given by <target> is an actual server, the
- destination server is REQUIRED to report all servers, services and
- operators which are connected to it; if the command was issued by an
- operator, the server MAY also report all users which are connected to
- it. If the destination given by <target> is a nickname, then only a
- reply for that nickname is given. If the <target> parameter is
- omitted, it is RECOMMENDED that the TRACE command is parsed as
- targeted to the processing server.
-
- Wildcards are allowed in the <target> parameter.
-
- Numeric Replies:
-
- ERR_NOSUCHSERVER
-
- If the TRACE message is destined for another server, all
- intermediate servers must return a RPL_TRACELINK reply to indicate
- that the TRACE passed through it and where it is going next.
-
- RPL_TRACELINK
-
-
-
-
-
-Kalt Informational [Page 29]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- A TRACE reply may be composed of any number of the following
- numeric replies.
-
- RPL_TRACECONNECTING RPL_TRACEHANDSHAKE
- RPL_TRACEUNKNOWN RPL_TRACEOPERATOR
- RPL_TRACEUSER RPL_TRACESERVER
- RPL_TRACESERVICE RPL_TRACENEWTYPE
- RPL_TRACECLASS RPL_TRACELOG
- RPL_TRACEEND
-
- Examples:
-
- TRACE *.oulu.fi ; TRACE to a server matching
- *.oulu.fi
-
-3.4.9 Admin command
-
- Command: ADMIN
- Parameters: [ <target> ]
-
- The admin command is used to find information about the administrator
- of the given server, or current server if <target> parameter is
- omitted. Each server MUST have the ability to forward ADMIN messages
- to other servers.
-
- Wildcards are allowed in the <target> parameter.
-
- Numeric Replies:
-
- ERR_NOSUCHSERVER
- RPL_ADMINME RPL_ADMINLOC1
- RPL_ADMINLOC2 RPL_ADMINEMAIL
-
- Examples:
-
- ADMIN tolsun.oulu.fi ; request an ADMIN reply from
- tolsun.oulu.fi
-
- ADMIN syrk ; ADMIN request for the server to
- which the user syrk is connected
-
-
-
-
-
-
-
-
-
-
-
-Kalt Informational [Page 30]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
-3.4.10 Info command
-
- Command: INFO
- Parameters: [ <target> ]
-
- The INFO command is REQUIRED to return information describing the
- server: its version, when it was compiled, the patchlevel, when it
- was started, and any other miscellaneous information which may be
- considered to be relevant.
-
- Wildcards are allowed in the <target> parameter.
-
- Numeric Replies:
-
- ERR_NOSUCHSERVER
- RPL_INFO RPL_ENDOFINFO
-
- Examples:
-
- INFO csd.bu.edu ; request an INFO reply from
- csd.bu.edu
-
- INFO Angel ; request info from the server that
- Angel is connected to.
-
-3.5 Service Query and Commands
-
- The service query group of commands has been designed to return
- information about any service which is connected to the network.
-
-3.5.1 Servlist message
-
- Command: SERVLIST
- Parameters: [ <mask> [ <type> ] ]
-
- The SERVLIST command is used to list services currently connected to
- the network and visible to the user issuing the command. The
- optional parameters may be used to restrict the result of the query
- (to matching services names, and services type).
-
- Numeric Replies:
-
- RPL_SERVLIST RPL_SERVLISTEND
-
-
-
-
-
-
-
-
-Kalt Informational [Page 31]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
-3.5.2 Squery
-
- Command: SQUERY
- Parameters: <servicename> <text>
-
- The SQUERY command is used similarly to PRIVMSG. The only difference
- is that the recipient MUST be a service. This is the only way for a
- text message to be delivered to a service.
-
- See PRIVMSG for more details on replies and example.
-
- Examples:
-
- SQUERY irchelp :HELP privmsg
- ; Message to the service with
- nickname irchelp.
-
- SQUERY dict@irc.fr :fr2en blaireau
- ; Message to the service with name
- dict@irc.fr.
-
-3.6 User based queries
-
- User queries are a group of commands which are primarily concerned
- with finding details on a particular user or group users. When using
- wildcards with any of these commands, if they match, they will only
- return information on users who are 'visible' to you. The visibility
- of a user is determined as a combination of the user's mode and the
- common set of channels you are both on.
-
- Although services SHOULD NOT be using this class of message, they are
- allowed to.
-
-3.6.1 Who query
-
- Command: WHO
- Parameters: [ <mask> [ "o" ] ]
-
- The WHO command is used by a client to generate a query which returns
- a list of information which 'matches' the <mask> parameter given by
- the client. In the absence of the <mask> parameter, all visible
- (users who aren't invisible (user mode +i) and who don't have a
- common channel with the requesting client) are listed. The same
- result can be achieved by using a <mask> of "0" or any wildcard which
- will end up matching every visible user.
-
- The <mask> passed to WHO is matched against users' host, server, real
- name and nickname if the channel <mask> cannot be found.
-
-
-
-Kalt Informational [Page 32]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- If the "o" parameter is passed only operators are returned according
- to the <mask> supplied.
-
- Numeric Replies:
-
- ERR_NOSUCHSERVER
- RPL_WHOREPLY RPL_ENDOFWHO
-
- Examples:
-
- WHO *.fi ; Command to list all users who match
- against "*.fi".
-
- WHO jto* o ; Command to list all users with a
- match against "jto*" if they are an
- operator.
-
-3.6.2 Whois query
-
- Command: WHOIS
- Parameters: [ <target> ] <mask> *( "," <mask> )
-
- This command is used to query information about particular user.
- The server will answer this command with several numeric messages
- indicating different statuses of each user which matches the mask (if
- you are entitled to see them). If no wildcard is present in the
- <mask>, any information about that nick which you are allowed to see
- is presented.
-
- If the <target> parameter is specified, it sends the query to a
- specific server. It is useful if you want to know how long the user
- in question has been idle as only local server (i.e., the server the
- user is directly connected to) knows that information, while
- everything else is globally known.
-
- Wildcards are allowed in the <target> parameter.
-
- Numeric Replies:
-
- ERR_NOSUCHSERVER ERR_NONICKNAMEGIVEN
- RPL_WHOISUSER RPL_WHOISCHANNELS
- RPL_WHOISCHANNELS RPL_WHOISSERVER
- RPL_AWAY RPL_WHOISOPERATOR
- RPL_WHOISIDLE ERR_NOSUCHNICK
- RPL_ENDOFWHOIS
-
-
-
-
-
-
-Kalt Informational [Page 33]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- Examples:
-
- WHOIS wiz ; return available user information
- about nick WiZ
-
- WHOIS eff.org trillian ; ask server eff.org for user
- information about trillian
-
-3.6.3 Whowas
-
- Command: WHOWAS
- Parameters: <nickname> *( "," <nickname> ) [ <count> [ <target> ] ]
-
- Whowas asks for information about a nickname which no longer exists.
- This may either be due to a nickname change or the user leaving IRC.
- In response to this query, the server searches through its nickname
- history, looking for any nicks which are lexically the same (no wild
- card matching here). The history is searched backward, returning the
- most recent entry first. If there are multiple entries, up to
- <count> replies will be returned (or all of them if no <count>
- parameter is given). If a non-positive number is passed as being
- <count>, then a full search is done.
-
- Wildcards are allowed in the <target> parameter.
-
- Numeric Replies:
-
- ERR_NONICKNAMEGIVEN ERR_WASNOSUCHNICK
- RPL_WHOWASUSER RPL_WHOISSERVER
- RPL_ENDOFWHOWAS
-
- Examples:
-
- WHOWAS Wiz ; return all information in the nick
- history about nick "WiZ";
-
- WHOWAS Mermaid 9 ; return at most, the 9 most recent
- entries in the nick history for
- "Mermaid";
-
- WHOWAS Trillian 1 *.edu ; return the most recent history for
- "Trillian" from the first server
- found to match "*.edu".
-
-3.7 Miscellaneous messages
-
- Messages in this category do not fit into any of the above categories
- but are nonetheless still a part of and REQUIRED by the protocol.
-
-
-
-Kalt Informational [Page 34]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
-3.7.1 Kill message
-
- Command: KILL
- Parameters: <nickname> <comment>
-
- The KILL command is used to cause a client-server connection to be
- closed by the server which has the actual connection. Servers
- generate KILL messages on nickname collisions. It MAY also be
- available available to users who have the operator status.
-
- Clients which have automatic reconnect algorithms effectively make
- this command useless since the disconnection is only brief. It does
- however break the flow of data and can be used to stop large amounts
- of 'flooding' from abusive users or accidents. Abusive users usually
- don't care as they will reconnect promptly and resume their abusive
- behaviour. To prevent this command from being abused, any user may
- elect to receive KILL messages generated for others to keep an 'eye'
- on would be trouble spots.
-
- In an arena where nicknames are REQUIRED to be globally unique at all
- times, KILL messages are sent whenever 'duplicates' are detected
- (that is an attempt to register two users with the same nickname) in
- the hope that both of them will disappear and only 1 reappear.
-
- When a client is removed as the result of a KILL message, the server
- SHOULD add the nickname to the list of unavailable nicknames in an
- attempt to avoid clients to reuse this name immediately which is
- usually the pattern of abusive behaviour often leading to useless
- "KILL loops". See the "IRC Server Protocol" document [IRC-SERVER]
- for more information on this procedure.
-
- The comment given MUST reflect the actual reason for the KILL. For
- server-generated KILLs it usually is made up of details concerning
- the origins of the two conflicting nicknames. For users it is left
- up to them to provide an adequate reason to satisfy others who see
- it. To prevent/discourage fake KILLs from being generated to hide
- the identify of the KILLer, the comment also shows a 'kill-path'
- which is updated by each server it passes through, each prepending
- its name to the path.
-
- Numeric Replies:
-
- ERR_NOPRIVILEGES ERR_NEEDMOREPARAMS
- ERR_NOSUCHNICK ERR_CANTKILLSERVER
-
-
-
-
-
-
-
-Kalt Informational [Page 35]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- NOTE:
- It is RECOMMENDED that only Operators be allowed to kill other users
- with KILL command. This command has been the subject of many
- controversies over the years, and along with the above
- recommendation, it is also widely recognized that not even operators
- should be allowed to kill users on remote servers.
-
-3.7.2 Ping message
-
- Command: PING
- Parameters: <server1> [ <server2> ]
-
- The PING command is used to test the presence of an active client or
- server at the other end of the connection. Servers send a PING
- message at regular intervals if no other activity detected coming
- from a connection. If a connection fails to respond to a PING
- message within a set amount of time, that connection is closed. A
- PING message MAY be sent even if the connection is active.
-
- When a PING message is received, the appropriate PONG message MUST be
- sent as reply to <server1> (server which sent the PING message out)
- as soon as possible. If the <server2> parameter is specified, it
- represents the target of the ping, and the message gets forwarded
- there.
-
- Numeric Replies:
-
- ERR_NOORIGIN ERR_NOSUCHSERVER
-
- Examples:
-
- PING tolsun.oulu.fi ; Command to send a PING message to
- server
-
- PING WiZ tolsun.oulu.fi ; Command from WiZ to send a PING
- message to server "tolsun.oulu.fi"
-
- PING :irc.funet.fi ; Ping message sent by server
- "irc.funet.fi"
-
-
-
-
-
-
-
-
-
-
-
-
-Kalt Informational [Page 36]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
-3.7.3 Pong message
-
- Command: PONG
- Parameters: <server> [ <server2> ]
-
- PONG message is a reply to ping message. If parameter <server2> is
- given, this message MUST be forwarded to given target. The <server>
- parameter is the name of the entity who has responded to PING message
- and generated this message.
-
- Numeric Replies:
-
- ERR_NOORIGIN ERR_NOSUCHSERVER
-
- Example:
-
- PONG csd.bu.edu tolsun.oulu.fi ; PONG message from csd.bu.edu to
- tolsun.oulu.fi
-
-3.7.4 Error
-
- Command: ERROR
- Parameters: <error message>
-
- The ERROR command is for use by servers when reporting a serious or
- fatal error to its peers. It may also be sent from one server to
- another but MUST NOT be accepted from any normal unknown clients.
-
- Only an ERROR message SHOULD be used for reporting errors which occur
- with a server-to-server link. An ERROR message is sent to the server
- at the other end (which reports it to appropriate local users and
- logs) and to appropriate local users and logs. It is not to be
- passed onto any other servers by a server if it is received from a
- server.
-
- The ERROR message is also used before terminating a client
- connection.
-
- When a server sends a received ERROR message to its operators, the
- message SHOULD be encapsulated inside a NOTICE message, indicating
- that the client was not responsible for the error.
-
- Numerics:
-
- None.
-
-
-
-
-
-
-Kalt Informational [Page 37]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- Examples:
-
- ERROR :Server *.fi already exists ; ERROR message to the other server
- which caused this error.
-
- NOTICE WiZ :ERROR from csd.bu.edu -- Server *.fi already exists
- ; Same ERROR message as above but
- sent to user WiZ on the other server.
-
-4. Optional features
-
- This section describes OPTIONAL messages. They are not required in a
- working server implementation of the protocol described herein. In
- the absence of the feature, an error reply message MUST be generated
- or an unknown command error. If the message is destined for another
- server to answer then it MUST be passed on (elementary parsing
- REQUIRED) The allocated numerics for this are listed with the
- messages below.
-
- From this section, only the USERHOST and ISON messages are available
- to services.
-
-4.1 Away
-
- Command: AWAY
- Parameters: [ <text> ]
-
- With the AWAY command, clients can set an automatic reply string for
- any PRIVMSG commands directed at them (not to a channel they are on).
- The server sends an automatic reply to the client sending the PRIVMSG
- command. The only replying server is the one to which the sending
- client is connected to.
-
- The AWAY command is used either with one parameter, to set an AWAY
- message, or with no parameters, to remove the AWAY message.
-
- Because of its high cost (memory and bandwidth wise), the AWAY
- message SHOULD only be used for client-server communication. A
- server MAY choose to silently ignore AWAY messages received from
- other servers. To update the away status of a client across servers,
- the user mode 'a' SHOULD be used instead. (See Section 3.1.5)
-
- Numeric Replies:
-
- RPL_UNAWAY RPL_NOWAWAY
-
-
-
-
-
-
-Kalt Informational [Page 38]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- Example:
-
- AWAY :Gone to lunch. Back in 5 ; Command to set away message to
- "Gone to lunch. Back in 5".
-
-4.2 Rehash message
-
- Command: REHASH
- Parameters: None
-
- The rehash command is an administrative command which can be used by
- an operator to force the server to re-read and process its
- configuration file.
-
- Numeric Replies:
-
- RPL_REHASHING ERR_NOPRIVILEGES
-
-
- Example:
-
- REHASH ; message from user with operator
- status to server asking it to reread
- its configuration file.
-
-4.3 Die message
-
- Command: DIE
- Parameters: None
-
- An operator can use the DIE command to shutdown the server. This
- message is optional since it may be viewed as a risk to allow
- arbitrary people to connect to a server as an operator and execute
- this command.
-
- The DIE command MUST always be fully processed by the server to which
- the sending client is connected and MUST NOT be passed onto other
- connected servers.
-
- Numeric Replies:
-
- ERR_NOPRIVILEGES
-
- Example:
-
- DIE ; no parameters required.
-
-
-
-
-
-Kalt Informational [Page 39]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
-4.4 Restart message
-
- Command: RESTART
- Parameters: None
-
- An operator can use the restart command to force the server to
- restart itself. This message is optional since it may be viewed as a
- risk to allow arbitrary people to connect to a server as an operator
- and execute this command, causing (at least) a disruption to service.
-
- The RESTART command MUST always be fully processed by the server to
- which the sending client is connected and MUST NOT be passed onto
- other connected servers.
-
- Numeric Replies:
-
- ERR_NOPRIVILEGES
-
- Example:
-
- RESTART ; no parameters required.
-
-4.5 Summon message
-
- Command: SUMMON
- Parameters: <user> [ <target> [ <channel> ] ]
-
- The SUMMON command can be used to give users who are on a host
- running an IRC server a message asking them to please join IRC. This
- message is only sent if the target server (a) has SUMMON enabled, (b)
- the user is logged in and (c) the server process can write to the
- user's tty (or similar).
-
- If no <server> parameter is given it tries to summon <user> from the
- server the client is connected to is assumed as the target.
-
- If summon is not enabled in a server, it MUST return the
- ERR_SUMMONDISABLED numeric.
-
- Numeric Replies:
-
- ERR_NORECIPIENT ERR_FILEERROR
- ERR_NOLOGIN ERR_NOSUCHSERVER
- ERR_SUMMONDISABLED RPL_SUMMONING
-
-
-
-
-
-
-
-Kalt Informational [Page 40]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- Examples:
-
- SUMMON jto ; summon user jto on the server's
- host
-
- SUMMON jto tolsun.oulu.fi ; summon user jto on the host which a
- server named "tolsun.oulu.fi" is
- running.
-
-4.6 Users
-
- Command: USERS
- Parameters: [ <target> ]
-
- The USERS command returns a list of users logged into the server in a
- format similar to the UNIX commands who(1), rusers(1) and finger(1).
- If disabled, the correct numeric MUST be returned to indicate this.
-
- Because of the security implications of such a command, it SHOULD be
- disabled by default in server implementations. Enabling it SHOULD
- require recompiling the server or some equivalent change rather than
- simply toggling an option and restarting the server. The procedure
- to enable this command SHOULD also include suitable large comments.
-
- Numeric Replies:
-
- ERR_NOSUCHSERVER ERR_FILEERROR
- RPL_USERSSTART RPL_USERS
- RPL_NOUSERS RPL_ENDOFUSERS
- ERR_USERSDISABLED
-
- Disabled Reply:
-
- ERR_USERSDISABLED
-
- Example:
-
- USERS eff.org ; request a list of users logged in
- on server eff.org
-
-4.7 Operwall message
-
- Command: WALLOPS
- Parameters: <Text to be sent>
-
- The WALLOPS command is used to send a message to all currently
- connected users who have set the 'w' user mode for themselves. (See
- Section 3.1.5 "User modes").
-
-
-
-Kalt Informational [Page 41]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- After implementing WALLOPS as a user command it was found that it was
- often and commonly abused as a means of sending a message to a lot of
- people. Due to this, it is RECOMMENDED that the implementation of
- WALLOPS allows and recognizes only servers as the originators of
- WALLOPS.
-
- Numeric Replies:
-
- ERR_NEEDMOREPARAMS
-
- Example:
-
- :csd.bu.edu WALLOPS :Connect '*.uiuc.edu 6667' from Joshua ; WALLOPS
- message from csd.bu.edu announcing a
- CONNECT message it received from
- Joshua and acted upon.
-
-4.8 Userhost message
-
- Command: USERHOST
- Parameters: <nickname> *( SPACE <nickname> )
-
- The USERHOST command takes a list of up to 5 nicknames, each
- separated by a space character and returns a list of information
- about each nickname that it found. The returned list has each reply
- separated by a space.
-
- Numeric Replies:
-
- RPL_USERHOST ERR_NEEDMOREPARAMS
-
- Example:
-
- USERHOST Wiz Michael syrk ; USERHOST request for information on
- nicks "Wiz", "Michael", and "syrk"
-
- :ircd.stealth.net 302 yournick :syrk=+syrk@millennium.stealth.net
- ; Reply for user syrk
-
-4.9 Ison message
-
- Command: ISON
- Parameters: <nickname> *( SPACE <nickname> )
-
- The ISON command was implemented to provide a quick and efficient
- means to get a response about whether a given nickname was currently
- on IRC. ISON only takes one (1) type of parameter: a space-separated
- list of nicks. For each nickname in the list that is present, the
-
-
-
-Kalt Informational [Page 42]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- server adds that to its reply string. Thus the reply string may
- return empty (none of the given nicks are present), an exact copy of
- the parameter string (all of them present) or any other subset of the
- set of nicks given in the parameter. The only limit on the number of
- nicks that may be checked is that the combined length MUST NOT be too
- large as to cause the server to chop it off so it fits in 512
- characters.
-
- ISON is only processed by the server local to the client sending the
- command and thus not passed onto other servers for further
- processing.
-
- Numeric Replies:
-
- RPL_ISON ERR_NEEDMOREPARAMS
-
- Example:
-
- ISON phone trillian WiZ jarlek Avalon Angel Monstah syrk
- ; Sample ISON request for 7 nicks.
-
-5. Replies
-
- The following is a list of numeric replies which are generated in
- response to the commands given above. Each numeric is given with its
- number, name and reply string.
-
-5.1 Command responses
-
- Numerics in the range from 001 to 099 are used for client-server
- connections only and should never travel between servers. Replies
- generated in the response to commands are found in the range from 200
- to 399.
-
- 001 RPL_WELCOME
- "Welcome to the Internet Relay Network
- <nick>!<user>@<host>"
- 002 RPL_YOURHOST
- "Your host is <servername>, running version <ver>"
- 003 RPL_CREATED
- "This server was created <date>"
- 004 RPL_MYINFO
- "<servername> <version> <available user modes>
- <available channel modes>"
-
- - The server sends Replies 001 to 004 to a user upon
- successful registration.
-
-
-
-
-Kalt Informational [Page 43]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- 005 RPL_BOUNCE
- "Try server <server name>, port <port number>"
-
- - Sent by the server to a user to suggest an alternative
- server. This is often used when the connection is
- refused because the server is already full.
-
- 302 RPL_USERHOST
- ":*1<reply> *( " " <reply> )"
-
- - Reply format used by USERHOST to list replies to
- the query list. The reply string is composed as
- follows:
-
- reply = nickname [ "*" ] "=" ( "+" / "-" ) hostname
-
- The '*' indicates whether the client has registered
- as an Operator. The '-' or '+' characters represent
- whether the client has set an AWAY message or not
- respectively.
-
- 303 RPL_ISON
- ":*1<nick> *( " " <nick> )"
-
- - Reply format used by ISON to list replies to the
- query list.
-
- 301 RPL_AWAY
- "<nick> :<away message>"
- 305 RPL_UNAWAY
- ":You are no longer marked as being away"
- 306 RPL_NOWAWAY
- ":You have been marked as being away"
-
- - These replies are used with the AWAY command (if
- allowed). RPL_AWAY is sent to any client sending a
- PRIVMSG to a client which is away. RPL_AWAY is only
- sent by the server to which the client is connected.
- Replies RPL_UNAWAY and RPL_NOWAWAY are sent when the
- client removes and sets an AWAY message.
-
- 311 RPL_WHOISUSER
- "<nick> <user> <host> * :<real name>"
- 312 RPL_WHOISSERVER
- "<nick> <server> :<server info>"
- 313 RPL_WHOISOPERATOR
- "<nick> :is an IRC operator"
-
-
-
-
-Kalt Informational [Page 44]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- 317 RPL_WHOISIDLE
- "<nick> <integer> :seconds idle"
- 318 RPL_ENDOFWHOIS
- "<nick> :End of WHOIS list"
- 319 RPL_WHOISCHANNELS
- "<nick> :*( ( "@" / "+" ) <channel> " " )"
-
- - Replies 311 - 313, 317 - 319 are all replies
- generated in response to a WHOIS message. Given that
- there are enough parameters present, the answering
- server MUST either formulate a reply out of the above
- numerics (if the query nick is found) or return an
- error reply. The '*' in RPL_WHOISUSER is there as
- the literal character and not as a wild card. For
- each reply set, only RPL_WHOISCHANNELS may appear
- more than once (for long lists of channel names).
- The '@' and '+' characters next to the channel name
- indicate whether a client is a channel operator or
- has been granted permission to speak on a moderated
- channel. The RPL_ENDOFWHOIS reply is used to mark
- the end of processing a WHOIS message.
-
- 314 RPL_WHOWASUSER
- "<nick> <user> <host> * :<real name>"
- 369 RPL_ENDOFWHOWAS
- "<nick> :End of WHOWAS"
-
- - When replying to a WHOWAS message, a server MUST use
- the replies RPL_WHOWASUSER, RPL_WHOISSERVER or
- ERR_WASNOSUCHNICK for each nickname in the presented
- list. At the end of all reply batches, there MUST
- be RPL_ENDOFWHOWAS (even if there was only one reply
- and it was an error).
-
- 321 RPL_LISTSTART
- Obsolete. Not used.
-
- 322 RPL_LIST
- "<channel> <# visible> :<topic>"
- 323 RPL_LISTEND
- ":End of LIST"
-
- - Replies RPL_LIST, RPL_LISTEND mark the actual replies
- with data and end of the server's response to a LIST
- command. If there are no channels available to return,
- only the end reply MUST be sent.
-
-
-
-
-
-Kalt Informational [Page 45]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- 325 RPL_UNIQOPIS
- "<channel> <nickname>"
-
- 324 RPL_CHANNELMODEIS
- "<channel> <mode> <mode params>"
-
- 331 RPL_NOTOPIC
- "<channel> :No topic is set"
- 332 RPL_TOPIC
- "<channel> :<topic>"
-
- - When sending a TOPIC message to determine the
- channel topic, one of two replies is sent. If
- the topic is set, RPL_TOPIC is sent back else
- RPL_NOTOPIC.
-
- 341 RPL_INVITING
- "<channel> <nick>"
-
- - Returned by the server to indicate that the
- attempted INVITE message was successful and is
- being passed onto the end client.
-
- 342 RPL_SUMMONING
- "<user> :Summoning user to IRC"
-
- - Returned by a server answering a SUMMON message to
- indicate that it is summoning that user.
-
- 346 RPL_INVITELIST
- "<channel> <invitemask>"
- 347 RPL_ENDOFINVITELIST
- "<channel> :End of channel invite list"
-
- - When listing the 'invitations masks' for a given channel,
- a server is required to send the list back using the
- RPL_INVITELIST and RPL_ENDOFINVITELIST messages. A
- separate RPL_INVITELIST is sent for each active mask.
- After the masks have been listed (or if none present) a
- RPL_ENDOFINVITELIST MUST be sent.
-
- 348 RPL_EXCEPTLIST
- "<channel> <exceptionmask>"
- 349 RPL_ENDOFEXCEPTLIST
- "<channel> :End of channel exception list"
-
-
-
-
-
-
-Kalt Informational [Page 46]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- - When listing the 'exception masks' for a given channel,
- a server is required to send the list back using the
- RPL_EXCEPTLIST and RPL_ENDOFEXCEPTLIST messages. A
- separate RPL_EXCEPTLIST is sent for each active mask.
- After the masks have been listed (or if none present)
- a RPL_ENDOFEXCEPTLIST MUST be sent.
-
- 351 RPL_VERSION
- "<version>.<debuglevel> <server> :<comments>"
-
- - Reply by the server showing its version details.
- The <version> is the version of the software being
- used (including any patchlevel revisions) and the
- <debuglevel> is used to indicate if the server is
- running in "debug mode".
-
- The "comments" field may contain any comments about
- the version or further version details.
-
- 352 RPL_WHOREPLY
- "<channel> <user> <host> <server> <nick>
- ( "H" / "G" > ["*"] [ ( "@" / "+" ) ]
- :<hopcount> <real name>"
-
- 315 RPL_ENDOFWHO
- "<name> :End of WHO list"
-
- - The RPL_WHOREPLY and RPL_ENDOFWHO pair are used
- to answer a WHO message. The RPL_WHOREPLY is only
- sent if there is an appropriate match to the WHO
- query. If there is a list of parameters supplied
- with a WHO message, a RPL_ENDOFWHO MUST be sent
- after processing each list item with <name> being
- the item.
-
- 353 RPL_NAMREPLY
- "( "=" / "*" / "@" ) <channel>
- :[ "@" / "+" ] <nick> *( " " [ "@" / "+" ] <nick> )
- - "@" is used for secret channels, "*" for private
- channels, and "=" for others (public channels).
-
- 366 RPL_ENDOFNAMES
- "<channel> :End of NAMES list"
-
- - To reply to a NAMES message, a reply pair consisting
- of RPL_NAMREPLY and RPL_ENDOFNAMES is sent by the
- server back to the client. If there is no channel
- found as in the query, then only RPL_ENDOFNAMES is
-
-
-
-Kalt Informational [Page 47]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- returned. The exception to this is when a NAMES
- message is sent with no parameters and all visible
- channels and contents are sent back in a series of
- RPL_NAMEREPLY messages with a RPL_ENDOFNAMES to mark
- the end.
-
- 364 RPL_LINKS
- "<mask> <server> :<hopcount> <server info>"
- 365 RPL_ENDOFLINKS
- "<mask> :End of LINKS list"
-
- - In replying to the LINKS message, a server MUST send
- replies back using the RPL_LINKS numeric and mark the
- end of the list using an RPL_ENDOFLINKS reply.
-
- 367 RPL_BANLIST
- "<channel> <banmask>"
- 368 RPL_ENDOFBANLIST
- "<channel> :End of channel ban list"
-
- - When listing the active 'bans' for a given channel,
- a server is required to send the list back using the
- RPL_BANLIST and RPL_ENDOFBANLIST messages. A separate
- RPL_BANLIST is sent for each active banmask. After the
- banmasks have been listed (or if none present) a
- RPL_ENDOFBANLIST MUST be sent.
-
- 371 RPL_INFO
- ":<string>"
- 374 RPL_ENDOFINFO
- ":End of INFO list"
-
- - A server responding to an INFO message is required to
- send all its 'info' in a series of RPL_INFO messages
- with a RPL_ENDOFINFO reply to indicate the end of the
- replies.
-
- 375 RPL_MOTDSTART
- ":- <server> Message of the day - "
- 372 RPL_MOTD
- ":- <text>"
- 376 RPL_ENDOFMOTD
- ":End of MOTD command"
-
- - When responding to the MOTD message and the MOTD file
- is found, the file is displayed line by line, with
- each line no longer than 80 characters, using
-
-
-
-
-Kalt Informational [Page 48]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- RPL_MOTD format replies. These MUST be surrounded
- by a RPL_MOTDSTART (before the RPL_MOTDs) and an
- RPL_ENDOFMOTD (after).
-
- 381 RPL_YOUREOPER
- ":You are now an IRC operator"
-
- - RPL_YOUREOPER is sent back to a client which has
- just successfully issued an OPER message and gained
- operator status.
-
- 382 RPL_REHASHING
- "<config file> :Rehashing"
-
- - If the REHASH option is used and an operator sends
- a REHASH message, an RPL_REHASHING is sent back to
- the operator.
-
- 383 RPL_YOURESERVICE
- "You are service <servicename>"
-
- - Sent by the server to a service upon successful
- registration.
-
- 391 RPL_TIME
- "<server> :<string showing server's local time>"
-
- - When replying to the TIME message, a server MUST send
- the reply using the RPL_TIME format above. The string
- showing the time need only contain the correct day and
- time there. There is no further requirement for the
- time string.
-
- 392 RPL_USERSSTART
- ":UserID Terminal Host"
- 393 RPL_USERS
- ":<username> <ttyline> <hostname>"
- 394 RPL_ENDOFUSERS
- ":End of users"
- 395 RPL_NOUSERS
- ":Nobody logged in"
-
- - If the USERS message is handled by a server, the
- replies RPL_USERSTART, RPL_USERS, RPL_ENDOFUSERS and
- RPL_NOUSERS are used. RPL_USERSSTART MUST be sent
- first, following by either a sequence of RPL_USERS
- or a single RPL_NOUSER. Following this is
- RPL_ENDOFUSERS.
-
-
-
-Kalt Informational [Page 49]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- 200 RPL_TRACELINK
- "Link <version & debug level> <destination>
- <next server> V<protocol version>
- <link uptime in seconds> <backstream sendq>
- <upstream sendq>"
- 201 RPL_TRACECONNECTING
- "Try. <class> <server>"
- 202 RPL_TRACEHANDSHAKE
- "H.S. <class> <server>"
- 203 RPL_TRACEUNKNOWN
- "???? <class> [<client IP address in dot form>]"
- 204 RPL_TRACEOPERATOR
- "Oper <class> <nick>"
- 205 RPL_TRACEUSER
- "User <class> <nick>"
- 206 RPL_TRACESERVER
- "Serv <class> <int>S <int>C <server>
- <nick!user|*!*>@<host|server> V<protocol version>"
- 207 RPL_TRACESERVICE
- "Service <class> <name> <type> <active type>"
- 208 RPL_TRACENEWTYPE
- "<newtype> 0 <client name>"
- 209 RPL_TRACECLASS
- "Class <class> <count>"
- 210 RPL_TRACERECONNECT
- Unused.
- 261 RPL_TRACELOG
- "File <logfile> <debug level>"
- 262 RPL_TRACEEND
- "<server name> <version & debug level> :End of TRACE"
-
- - The RPL_TRACE* are all returned by the server in
- response to the TRACE message. How many are
- returned is dependent on the TRACE message and
- whether it was sent by an operator or not. There
- is no predefined order for which occurs first.
- Replies RPL_TRACEUNKNOWN, RPL_TRACECONNECTING and
- RPL_TRACEHANDSHAKE are all used for connections
- which have not been fully established and are either
- unknown, still attempting to connect or in the
- process of completing the 'server handshake'.
- RPL_TRACELINK is sent by any server which handles
- a TRACE message and has to pass it on to another
- server. The list of RPL_TRACELINKs sent in
- response to a TRACE command traversing the IRC
- network should reflect the actual connectivity of
- the servers themselves along that path.
-
-
-
-
-Kalt Informational [Page 50]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- RPL_TRACENEWTYPE is to be used for any connection
- which does not fit in the other categories but is
- being displayed anyway.
- RPL_TRACEEND is sent to indicate the end of the list.
-
- 211 RPL_STATSLINKINFO
- "<linkname> <sendq> <sent messages>
- <sent Kbytes> <received messages>
- <received Kbytes> <time open>"
-
- - reports statistics on a connection. <linkname>
- identifies the particular connection, <sendq> is
- the amount of data that is queued and waiting to be
- sent <sent messages> the number of messages sent,
- and <sent Kbytes> the amount of data sent, in
- Kbytes. <received messages> and <received Kbytes>
- are the equivalent of <sent messages> and <sent
- Kbytes> for received data, respectively. <time
- open> indicates how long ago the connection was
- opened, in seconds.
-
- 212 RPL_STATSCOMMANDS
- "<command> <count> <byte count> <remote count>"
-
- - reports statistics on commands usage.
-
- 219 RPL_ENDOFSTATS
- "<stats letter> :End of STATS report"
-
- 242 RPL_STATSUPTIME
- ":Server Up %d days %d:%02d:%02d"
-
- - reports the server uptime.
-
- 243 RPL_STATSOLINE
- "O <hostmask> * <name>"
-
- - reports the allowed hosts from where user may become IRC
- operators.
-
- 221 RPL_UMODEIS
- "<user mode string>"
-
- - To answer a query about a client's own mode,
- RPL_UMODEIS is sent back.
-
- 234 RPL_SERVLIST
- "<name> <server> <mask> <type> <hopcount> <info>"
-
-
-
-Kalt Informational [Page 51]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- 235 RPL_SERVLISTEND
- "<mask> <type> :End of service listing"
-
- - When listing services in reply to a SERVLIST message,
- a server is required to send the list back using the
- RPL_SERVLIST and RPL_SERVLISTEND messages. A separate
- RPL_SERVLIST is sent for each service. After the
- services have been listed (or if none present) a
- RPL_SERVLISTEND MUST be sent.
-
- 251 RPL_LUSERCLIENT
- ":There are <integer> users and <integer>
- services on <integer> servers"
- 252 RPL_LUSEROP
- "<integer> :operator(s) online"
- 253 RPL_LUSERUNKNOWN
- "<integer> :unknown connection(s)"
- 254 RPL_LUSERCHANNELS
- "<integer> :channels formed"
- 255 RPL_LUSERME
- ":I have <integer> clients and <integer>
- servers"
-
- - In processing an LUSERS message, the server
- sends a set of replies from RPL_LUSERCLIENT,
- RPL_LUSEROP, RPL_USERUNKNOWN,
- RPL_LUSERCHANNELS and RPL_LUSERME. When
- replying, a server MUST send back
- RPL_LUSERCLIENT and RPL_LUSERME. The other
- replies are only sent back if a non-zero count
- is found for them.
-
- 256 RPL_ADMINME
- "<server> :Administrative info"
- 257 RPL_ADMINLOC1
- ":<admin info>"
- 258 RPL_ADMINLOC2
- ":<admin info>"
- 259 RPL_ADMINEMAIL
- ":<admin info>"
-
- - When replying to an ADMIN message, a server
- is expected to use replies RPL_ADMINME
- through to RPL_ADMINEMAIL and provide a text
- message with each. For RPL_ADMINLOC1 a
- description of what city, state and country
- the server is in is expected, followed by
- details of the institution (RPL_ADMINLOC2)
-
-
-
-Kalt Informational [Page 52]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- and finally the administrative contact for the
- server (an email address here is REQUIRED)
- in RPL_ADMINEMAIL.
-
- 263 RPL_TRYAGAIN
- "<command> :Please wait a while and try again."
-
- - When a server drops a command without processing it,
- it MUST use the reply RPL_TRYAGAIN to inform the
- originating client.
-
-5.2 Error Replies
-
- Error replies are found in the range from 400 to 599.
-
- 401 ERR_NOSUCHNICK
- "<nickname> :No such nick/channel"
-
- - Used to indicate the nickname parameter supplied to a
- command is currently unused.
-
- 402 ERR_NOSUCHSERVER
- "<server name> :No such server"
-
- - Used to indicate the server name given currently
- does not exist.
-
- 403 ERR_NOSUCHCHANNEL
- "<channel name> :No such channel"
-
- - Used to indicate the given channel name is invalid.
-
- 404 ERR_CANNOTSENDTOCHAN
- "<channel name> :Cannot send to channel"
-
- - Sent to a user who is either (a) not on a channel
- which is mode +n or (b) not a chanop (or mode +v) on
- a channel which has mode +m set or where the user is
- banned and is trying to send a PRIVMSG message to
- that channel.
-
- 405 ERR_TOOMANYCHANNELS
- "<channel name> :You have joined too many channels"
-
- - Sent to a user when they have joined the maximum
- number of allowed channels and they try to join
- another channel.
-
-
-
-
-Kalt Informational [Page 53]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- 406 ERR_WASNOSUCHNICK
- "<nickname> :There was no such nickname"
-
- - Returned by WHOWAS to indicate there is no history
- information for that nickname.
-
- 407 ERR_TOOMANYTARGETS
- "<target> :<error code> recipients. <abort message>"
-
- - Returned to a client which is attempting to send a
- PRIVMSG/NOTICE using the user@host destination format
- and for a user@host which has several occurrences.
-
- - Returned to a client which trying to send a
- PRIVMSG/NOTICE to too many recipients.
-
- - Returned to a client which is attempting to JOIN a safe
- channel using the shortname when there are more than one
- such channel.
-
- 408 ERR_NOSUCHSERVICE
- "<service name> :No such service"
-
- - Returned to a client which is attempting to send a SQUERY
- to a service which does not exist.
-
- 409 ERR_NOORIGIN
- ":No origin specified"
-
- - PING or PONG message missing the originator parameter.
-
- 411 ERR_NORECIPIENT
- ":No recipient given (<command>)"
- 412 ERR_NOTEXTTOSEND
- ":No text to send"
- 413 ERR_NOTOPLEVEL
- "<mask> :No toplevel domain specified"
- 414 ERR_WILDTOPLEVEL
- "<mask> :Wildcard in toplevel domain"
- 415 ERR_BADMASK
- "<mask> :Bad Server/host mask"
-
- - 412 - 415 are returned by PRIVMSG to indicate that
- the message wasn't delivered for some reason.
- ERR_NOTOPLEVEL and ERR_WILDTOPLEVEL are errors that
- are returned when an invalid use of
- "PRIVMSG $<server>" or "PRIVMSG #<host>" is attempted.
-
-
-
-
-Kalt Informational [Page 54]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- 421 ERR_UNKNOWNCOMMAND
- "<command> :Unknown command"
-
- - Returned to a registered client to indicate that the
- command sent is unknown by the server.
-
- 422 ERR_NOMOTD
- ":MOTD File is missing"
-
- - Server's MOTD file could not be opened by the server.
-
- 423 ERR_NOADMININFO
- "<server> :No administrative info available"
-
- - Returned by a server in response to an ADMIN message
- when there is an error in finding the appropriate
- information.
-
- 424 ERR_FILEERROR
- ":File error doing <file op> on <file>"
-
- - Generic error message used to report a failed file
- operation during the processing of a message.
-
- 431 ERR_NONICKNAMEGIVEN
- ":No nickname given"
-
- - Returned when a nickname parameter expected for a
- command and isn't found.
-
- 432 ERR_ERRONEUSNICKNAME
- "<nick> :Erroneous nickname"
-
- - Returned after receiving a NICK message which contains
- characters which do not fall in the defined set. See
- section 2.3.1 for details on valid nicknames.
-
- 433 ERR_NICKNAMEINUSE
- "<nick> :Nickname is already in use"
-
- - Returned when a NICK message is processed that results
- in an attempt to change to a currently existing
- nickname.
-
-
-
-
-
-
-
-
-Kalt Informational [Page 55]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- 436 ERR_NICKCOLLISION
- "<nick> :Nickname collision KILL from <user>@<host>"
-
- - Returned by a server to a client when it detects a
- nickname collision (registered of a NICK that
- already exists by another server).
-
- 437 ERR_UNAVAILRESOURCE
- "<nick/channel> :Nick/channel is temporarily unavailable"
-
- - Returned by a server to a user trying to join a channel
- currently blocked by the channel delay mechanism.
-
- - Returned by a server to a user trying to change nickname
- when the desired nickname is blocked by the nick delay
- mechanism.
-
- 441 ERR_USERNOTINCHANNEL
- "<nick> <channel> :They aren't on that channel"
-
- - Returned by the server to indicate that the target
- user of the command is not on the given channel.
-
- 442 ERR_NOTONCHANNEL
- "<channel> :You're not on that channel"
-
- - Returned by the server whenever a client tries to
- perform a channel affecting command for which the
- client isn't a member.
-
- 443 ERR_USERONCHANNEL
- "<user> <channel> :is already on channel"
-
- - Returned when a client tries to invite a user to a
- channel they are already on.
-
- 444 ERR_NOLOGIN
- "<user> :User not logged in"
-
- - Returned by the summon after a SUMMON command for a
- user was unable to be performed since they were not
- logged in.
-
-
-
-
-
-
-
-
-
-Kalt Informational [Page 56]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- 445 ERR_SUMMONDISABLED
- ":SUMMON has been disabled"
-
- - Returned as a response to the SUMMON command. MUST be
- returned by any server which doesn't implement it.
-
- 446 ERR_USERSDISABLED
- ":USERS has been disabled"
-
- - Returned as a response to the USERS command. MUST be
- returned by any server which does not implement it.
-
- 451 ERR_NOTREGISTERED
- ":You have not registered"
-
- - Returned by the server to indicate that the client
- MUST be registered before the server will allow it
- to be parsed in detail.
-
- 461 ERR_NEEDMOREPARAMS
- "<command> :Not enough parameters"
-
- - Returned by the server by numerous commands to
- indicate to the client that it didn't supply enough
- parameters.
-
- 462 ERR_ALREADYREGISTRED
- ":Unauthorized command (already registered)"
-
- - Returned by the server to any link which tries to
- change part of the registered details (such as
- password or user details from second USER message).
-
- 463 ERR_NOPERMFORHOST
- ":Your host isn't among the privileged"
-
- - Returned to a client which attempts to register with
- a server which does not been setup to allow
- connections from the host the attempted connection
- is tried.
-
- 464 ERR_PASSWDMISMATCH
- ":Password incorrect"
-
- - Returned to indicate a failed attempt at registering
- a connection for which a password was required and
- was either not given or incorrect.
-
-
-
-
-Kalt Informational [Page 57]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- 465 ERR_YOUREBANNEDCREEP
- ":You are banned from this server"
-
- - Returned after an attempt to connect and register
- yourself with a server which has been setup to
- explicitly deny connections to you.
-
- 466 ERR_YOUWILLBEBANNED
-
- - Sent by a server to a user to inform that access to the
- server will soon be denied.
-
- 467 ERR_KEYSET
- "<channel> :Channel key already set"
- 471 ERR_CHANNELISFULL
- "<channel> :Cannot join channel (+l)"
- 472 ERR_UNKNOWNMODE
- "<char> :is unknown mode char to me for <channel>"
- 473 ERR_INVITEONLYCHAN
- "<channel> :Cannot join channel (+i)"
- 474 ERR_BANNEDFROMCHAN
- "<channel> :Cannot join channel (+b)"
- 475 ERR_BADCHANNELKEY
- "<channel> :Cannot join channel (+k)"
- 476 ERR_BADCHANMASK
- "<channel> :Bad Channel Mask"
- 477 ERR_NOCHANMODES
- "<channel> :Channel doesn't support modes"
- 478 ERR_BANLISTFULL
- "<channel> <char> :Channel list is full"
-
- 481 ERR_NOPRIVILEGES
- ":Permission Denied- You're not an IRC operator"
-
- - Any command requiring operator privileges to operate
- MUST return this error to indicate the attempt was
- unsuccessful.
-
- 482 ERR_CHANOPRIVSNEEDED
- "<channel> :You're not channel operator"
-
- - Any command requiring 'chanop' privileges (such as
- MODE messages) MUST return this error if the client
- making the attempt is not a chanop on the specified
- channel.
-
-
-
-
-
-
-Kalt Informational [Page 58]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- 483 ERR_CANTKILLSERVER
- ":You can't kill a server!"
-
- - Any attempts to use the KILL command on a server
- are to be refused and this error returned directly
- to the client.
-
- 484 ERR_RESTRICTED
- ":Your connection is restricted!"
-
- - Sent by the server to a user upon connection to indicate
- the restricted nature of the connection (user mode "+r").
-
- 485 ERR_UNIQOPPRIVSNEEDED
- ":You're not the original channel operator"
-
- - Any MODE requiring "channel creator" privileges MUST
- return this error if the client making the attempt is not
- a chanop on the specified channel.
-
- 491 ERR_NOOPERHOST
- ":No O-lines for your host"
-
- - If a client sends an OPER message and the server has
- not been configured to allow connections from the
- client's host as an operator, this error MUST be
- returned.
-
- 501 ERR_UMODEUNKNOWNFLAG
- ":Unknown MODE flag"
-
- - Returned by the server to indicate that a MODE
- message was sent with a nickname parameter and that
- the a mode flag sent was not recognized.
-
- 502 ERR_USERSDONTMATCH
- ":Cannot change mode for other users"
-
- - Error sent to any user trying to view or change the
- user mode for a user other than themselves.
-
-5.3 Reserved numerics
-
- These numerics are not described above since they fall into one of
- the following categories:
-
- 1. no longer in use;
-
-
-
-
-Kalt Informational [Page 59]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
- 2. reserved for future planned use;
-
- 3. in current use but are part of a non-generic 'feature' of
- the current IRC server.
-
- 231 RPL_SERVICEINFO 232 RPL_ENDOFSERVICES
- 233 RPL_SERVICE
- 300 RPL_NONE 316 RPL_WHOISCHANOP
- 361 RPL_KILLDONE 362 RPL_CLOSING
- 363 RPL_CLOSEEND 373 RPL_INFOSTART
- 384 RPL_MYPORTIS
-
- 213 RPL_STATSCLINE 214 RPL_STATSNLINE
- 215 RPL_STATSILINE 216 RPL_STATSKLINE
- 217 RPL_STATSQLINE 218 RPL_STATSYLINE
- 240 RPL_STATSVLINE 241 RPL_STATSLLINE
- 244 RPL_STATSHLINE 244 RPL_STATSSLINE
- 246 RPL_STATSPING 247 RPL_STATSBLINE
- 250 RPL_STATSDLINE
-
- 492 ERR_NOSERVICEHOST
-
-6. Current implementations
-
- The IRC software, version 2.10 is the only complete implementation of
- the IRC protocol (client and server). Because of the small amount of
- changes in the client protocol since the publication of RFC 1459
- [IRC], implementations that follow it are likely to be compliant with
- this protocol or to require a small amount of changes to reach
- compliance.
-
-7. Current problems
-
- There are a number of recognized problems with the IRC Client
- Protocol, and more generally with the IRC Server Protocol. In order
- to preserve backward compatibility with old clients, this protocol
- has almost not evolved since the publication of RFC 1459 [IRC].
-
-7.1 Nicknames
-
- The idea of the nickname on IRC is very convenient for users to use
- when talking to each other outside of a channel, but there is only a
- finite nickname space and being what they are, it's not uncommon for
- several people to want to use the same nick. If a nickname is chosen
- by two people using this protocol, either one will not succeed or
- both will removed by use of a server KILL (See Section 3.7.1).
-
-
-
-
-
-Kalt Informational [Page 60]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
-7.2 Limitation of wildcards
-
- There is no way to escape the escape character "\" (%x5C). While
- this isn't usually a problem, it makes it impossible to form a mask
- with a backslash character ("\") preceding a wildcard.
-
-7.3 Security considerations
-
- Security issues related to this protocol are discussed in the "IRC
- Server Protocol" [IRC-SERVER] as they are mostly an issue for the
- server side of the connection.
-
-8. Current support and availability
-
- Mailing lists for IRC related discussion:
- General discussion: ircd-users@irc.org
- Protocol development: ircd-dev@irc.org
-
- Software implementations:
- ftp://ftp.irc.org/irc/server
- ftp://ftp.funet.fi/pub/unix/irc
- ftp://ftp.irc.org/irc/clients
-
- Newsgroup: alt.irc
-
-9. Acknowledgements
-
- Parts of this document were copied from the RFC 1459 [IRC] which
- first formally documented the IRC Protocol. It has also benefited
- from many rounds of review and comments. In particular, the
- following people have made significant contributions to this
- document:
-
- Matthew Green, Michael Neumayer, Volker Paulsen, Kurt Roeckx, Vesa
- Ruokonen, Magnus Tjernstrom, Stefan Zehl.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-Kalt Informational [Page 61]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
-10. References
-
- [KEYWORDS] Bradner, S., "Key words for use in RFCs to Indicate
- Requirement Levels", BCP 14, RFC 2119, March 1997.
-
- [ABNF] Crocker, D. and P. Overell, "Augmented BNF for Syntax
- Specifications: ABNF", RFC 2234, November 1997.
-
- [HNAME] Braden, R., "Requirements for Internet Hosts --
- Application and Support", STD 3, RFC 1123, October 1989.
-
- [IRC] Oikarinen, J. & D. Reed, "Internet Relay Chat Protocol",
- RFC 1459, May 1993.
-
- [IRC-ARCH] Kalt, C., "Internet Relay Chat: Architecture", RFC 2810,
- April 2000.
-
- [IRC-CHAN] Kalt, C., "Internet Relay Chat: Channel Management", RFC
- 2811, April 2000.
-
- [IRC-SERVER] Kalt, C., "Internet Relay Chat: Server Protocol", RFC
- 2813, April 2000.
-
-11. Author's Address
-
- Christophe Kalt
- 99 Teaneck Rd, Apt #117
- Ridgefield Park, NJ 07660
- USA
-
- EMail: kalt@stealth.net
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-Kalt Informational [Page 62]
-
-RFC 2812 Internet Relay Chat: Client Protocol April 2000
-
-
-12. Full Copyright Statement
-
- Copyright (C) The Internet Society (2000). All Rights Reserved.
-
- This document and translations of it may be copied and furnished to
- others, and derivative works that comment on or otherwise explain it
- or assist in its implementation may be prepared, copied, published
- and distributed, in whole or in part, without restriction of any
- kind, provided that the above copyright notice and this paragraph are
- included on all such copies and derivative works. However, this
- document itself may not be modified in any way, such as by removing
- the copyright notice or references to the Internet Society or other
- Internet organizations, except as needed for the purpose of
- developing Internet standards in which case the procedures for
- copyrights defined in the Internet Standards process must be
- followed, or as required to translate it into languages other than
- English.
-
- The limited permissions granted above are perpetual and will not be
- revoked by the Internet Society or its successors or assigns.
-
- This document and the information contained herein is provided on an
- "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
- TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
- BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
- HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
- MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
-
-Acknowledgement
-
- Funding for the RFC Editor function is currently provided by the
- Internet Society.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-Kalt Informational [Page 63]
-