aboutsummaryrefslogtreecommitdiff
path: root/amforth-6.5/appl/arduino/readme.txt
diff options
context:
space:
mode:
Diffstat (limited to 'amforth-6.5/appl/arduino/readme.txt')
-rw-r--r--amforth-6.5/appl/arduino/readme.txt50
1 files changed, 0 insertions, 50 deletions
diff --git a/amforth-6.5/appl/arduino/readme.txt b/amforth-6.5/appl/arduino/readme.txt
deleted file mode 100644
index 45b79df..0000000
--- a/amforth-6.5/appl/arduino/readme.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-Authore: Andy Kirby (andy@kirbyand.co.uk), Based on the Amforth Application Template.
-Licensing: as per the Amforth Project.
-
-These are demo application templates for using standard off the shelf Arduino Boards (or Clones) as an Amforth development system. Three of the templates are useable with DIL devices for cheap entry level use or embeding into your own breadboard/stripboard deisgns.
-
-Models Described are:-
-
-Model Microcontroler Host Xtal DBG-LED Flash B-Load Ram Fuses (E,H,L)
-Mega ATMega 1280 uart0 16Mhz PB7 128K 512b/1k/2k/4k 8k F7 D9 FF
-Diecimila ATMega 168 uart0 16Mhz PB5 16K 128b/256b/512b/1k 1k F9 DD FF
-Duemilanove ATMega 328 uart0 16Mhz PB5 32k 256b/512b/1k/2k 2k 05 D9 FF
-Uno ATMega 328 uart0 16Mhz PB5 32k 256b/512b/1k/2k 2k 05 D9 FF
-Sanguino ATMega 644 uart0 16Mhz PB0 64k 512/1k/2k/4k 4k FD F9 FF
-
-
-Notes
-
-0. double check the fuses settings. Esp. the duemilanove may have the wrong settings. set the HFuse to 0xd9
- to maximize the bootloader size.
-
-1. Whilst most errors and problems you encounter are likely to be those I have created rather than the original
- code on which this is based, please report forward comments, feedback, reports, bugs, fixes and patches etc
- through the Amforth Projects development mailing lists and forums etc.
-
-2. The binary Amforth images cannot be loaded/programmed using the Arduino Bootloader. An ICSP programmer
- (avrisp, etc) must be used to load the image.
-
-3. The Arduino bootloader is over writen with the Amforth code and is no longer available after programing.
- To restore your board for use with the Arduino IDE you must overwrite the Amforth image with an Arduino
- Bootloader image.
-
-4. The Sanguino is not correctly speaking an Arduino Project design, but forms the basis of the Reprap
- controller designed and made popular by Makerbot. This processor/board is also notable for being the
- largest ATMega device available in a DIL format that makes it poular for prototyping and ammateur constructors.
-
-5. The 168 and 328 devices similar to note 4 above are available in DIL packaging making them popular for
- prototyping and ammateur constructors.
-
-6. The 1280 device is only available in surface mount options and is likely only to be found in commercialy
- produced boards and used by dedicated electronics enthusiasts.
-
-7. Whilst described as using a 328 device early versions of the Duemilanove may actualy have a 168 installed.
- This can be easily exchanged for a 328 if more resources are needed.
-
-8. The Diecimila board is also compatible with the 328 device commonly found in the newer Duemilanove board.
-
-9. For the arduino mega the content of the dict_appl.inc can be moved to dict_appl_core.inc. This gives more
- usable dictionary space.
-
-10. The UNO has the same controller as the duemilanove, the hexfiles are the same. \ No newline at end of file