aboutsummaryrefslogtreecommitdiff
path: root/cmd/enc/Graphtec.ini
diff options
context:
space:
mode:
Diffstat (limited to 'cmd/enc/Graphtec.ini')
-rw-r--r--cmd/enc/Graphtec.ini2683
1 files changed, 2683 insertions, 0 deletions
diff --git a/cmd/enc/Graphtec.ini b/cmd/enc/Graphtec.ini
new file mode 100644
index 0000000..50ec790
--- /dev/null
+++ b/cmd/enc/Graphtec.ini
@@ -0,0 +1,2683 @@
+{Graphtec GPGL}(3) //(maker type:1-cutter/plotter;2-printer;4-engraver/router)
+Version = 3.00 created: 01/16/2006 01:43:00PM
+
+[CraftROBO cc100-20]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$258,1026,32,17,0,$
+04:$521207818,20,10,1024,2893,$
+05:$8.5/1968.0,$
+06:$8.5,1968,0,0,0,0,$
+07:$CraftROBOcc100$
+- //cutting
+08:$pmcutter.dll$
+09:$508.0,0,0,$
+10:$U$
+11:$$
+12:$FM0,TB50,0,&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,Fil$
+- //paper
+1000: $8.5/11.0,"Letter",Margin=0.313,0.313,0,0,$
+1001: $8.2677/11.6929,"A4",Margin=0.19685,0.19685,0,0,$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{!(0,Speed,0,10,1,0,1,0,),}{(2,Force,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,7)(2,1,*6,3,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,3)(2,1,*6,2,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,10)(2,1,*6,1,)
+- //custom end
+- //macro
+- //comment
+
+[CraftROBO cc200-20]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$258,1026,32,17,0,$
+04:$521207819,20,10,1024,2893,$
+05:$8.5/1968.0,$
+06:$8.5,1968,0,0,0,0,$
+07:$CraftROBOcc100$
+- //cutting
+08:$pmcutter.dll$
+09:$508.0,0,0,$
+10:$U$
+11:$$
+12:$FM0,TB50,0,&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,Fil$
+- //paper
+1000: $8.5/11.0,"Letter",Margin=0.313,0.313,0,0,$
+1001: $8.2677/11.6929,"A4",Margin=0.19685,0.19685,0,0,$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{!(0,Speed,0,10,1,0,1,0,),}{(2,Force,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,7)(2,1,*6,3,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,3)(2,1,*6,2,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,10)(2,1,*6,1,)
+- //custom end
+- //macro
+- //comment
+
+[CraftROBO cc300-20]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$258,1026,32,17,0,$
+04:$521207858,20,10,1024,2893,$
+05:$8.2677/1968.0,$
+06:$8.2677,1968,0,0,0,0,$
+07:$CraftROBOcc300$
+- //cutting
+08:$pmcutter.dll$
+09:$508.0,0,0,$
+10:$U$
+11:$$
+12:$FM0,TB50,0,&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,Fil$
+- //paper
+1000: $8.2677/11.6929,"A4",Margin=0.19685,0.19685,0,0,$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{!(0,Speed,0,7,1,0,1,0,),}{(2,Force,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,7)(2,1,*6,3,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,3)(2,1,*6,2,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,10)(2,1,*6,1,)
+- //custom end
+- //macro
+- //comment
+
+[CraftROBO cc300L-20]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$258,1026,32,17,0,$
+04:$521207859,20,10,1024,2893,$
+05:$8.5/1968.0,$
+06:$8.5,1968,0,0,0,0,$
+07:$CraftROBOcc300L$
+- //cutting
+08:$pmcutter.dll$
+09:$508.0,0,0,$
+10:$U$
+11:$$
+12:$FM0,TB50,0,&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,Fil$
+- //paper
+1000: $8.5/11.0,"Letter",Margin=0.313,0.313,0,0,$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{!(0,Speed,0,7,1,0,1,0,),}{(2,Force,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,7)(2,1,*6,3,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,3)(2,1,*6,2,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,10)(2,1,*6,1,)
+- //custom end
+- //macro
+- //comment
+
+[CraftROBO cc330-20]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$258,1026,32,17,0,$
+04:$521207860,20,10,1024,2893,$
+05:$8.2677/1968.0,$
+06:$8.2677,1968,0,0,0,0,$
+07:$CraftROBOcc330$
+- //cutting
+08:$pmcutter.dll$
+09:$508.0,0,0,$
+10:$U$
+11:$$
+12:$FM0,TB50,0,&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,Fil$
+- //paper
+1000: $8.2677/11.6929,"A4",Margin=0.19685,0.19685,0,0,$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{!(0,Speed,0,10,1,0,1,0,),}{(2,Force,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,7)(2,1,*6,3,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,3)(2,1,*6,2,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,10)(2,1,*6,1,)
+- //custom end
+- //macro
+- //comment
+
+[CraftROBO cc330L-20]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$258,1026,32,17,0,$
+04:$521207861,20,10,1024,2893,$
+05:$8.5/1968.0,$
+06:$8.5,1968,0,0,0,0,$
+07:$CraftROBOcc330L$
+- //cutting
+08:$pmcutter.dll$
+09:$508.0,0,0,$
+10:$U$
+11:$$
+12:$FM0,TB50,0,&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,Fil$
+- //paper
+1000: $8.5/11.0,"Letter",Margin=0.313,0.313,0,0,$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{!(0,Speed,0,10,1,0,1,0,),}{(2,Force,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,7)(2,1,*6,3,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,3)(2,1,*6,2,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,10)(2,1,*6,1,)
+- //custom end
+- //macro
+- //comment
+
+
+
+[CE3000-40]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207820,20,10,1024,2893,$
+05:$15.0/1968.0,$
+06:$15.0,1968,0,0,0,0,$
+07:$CE3000-40$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,LPT,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,0,4,1,0,1,0,),}{!(0,Speed,0,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+[CE3000-60]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207821,20,10,1024,2893,$
+05:$24/1968.0,$
+06:$24,1968,0,0,0,0,$
+07:$CE3000-60$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,LPT,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,0,4,1,0,1,0,),}{!(0,Speed,0,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+[CE3000-120]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207822,20,10,1024,2893,$
+05:$48/1968.0,$
+06:$48,1968,0,0,0,0,$
+07:$CE3000-120$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,LPT,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+[CE3000-40-CRP]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207848,20,10,1024,2893,$
+05:$16/1968.0,$
+06:$16,1968,0,0,0,0,$
+07:$CE3000-40-CRP$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,LPT,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,0,4,1,0,1,0,),}{!(0,Speed,0,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+[CE3000Mk2-60]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207840,20,10,1024,2893,$
+05:$24/1968.0,$
+06:$24,1968,0,0,0,0,$
+07:$CE3000MkII-60$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,LPT,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,0,4,1,0,1,0,),}{!(0,Speed,0,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+[CE3000Mk2-120]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207841,20,10,1024,2893,$
+05:$48/1968.0,$
+06:$48,1968,0,0,0,0,$
+07:$CE3000MkII-120$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,LPT,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+[CE5000-40-CRP]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207849,20,10,1024,2893,$
+05:$16/1968.0,$
+06:$16,1968,0,0,0,0,$
+07:$CE5000-40-CRP$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,LPT,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,0,4,1,0,1,0,),}{!(0,Speed,0,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+[CE5000-60]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207842,20,10,1024,2893,$
+05:$24/1968.0,$
+06:$24,1968,0,0,0,0,$
+07:$CE5000-60$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,LPT,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,0,4,1,0,1,0,),}{!(0,Speed,0,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+[CE5000-120]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207843,20,10,1024,2893,$
+05:$48/1968.0,$
+06:$48,1968,0,0,0,0,$
+07:$CE5000-120$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,LPT,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+[FC223X-60]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$8192,1049602,32,17,0,$
+04:$521207823,20,10,1024,2893,$
+05:$36.2204724/24.015748,$
+06:$36.2204724,24.015748,0,0,0,0,$
+07:$FC223X-60$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,LPT,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+[FC223X-90]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$8192,1049602,32,17,0,$
+04:$521207824,20,10,1024,2893,$
+05:$36.2204724/47.2440945.0,$
+06:$36.2204724,47.2440945,0,0,0,0,$
+07:$FC223X-90$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,LPT,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+[FC2240-60]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$8192,1049602,32,17,0,$
+04:$521207825,20,10,1024,2893,$
+05:$36.2204724/24.015748,$
+06:$36.2204724,24.015748,0,0,0,0,$
+07:$FC2240-60$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,8,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+[FC2240-120]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$8192,1049602,32,17,0,$
+04:$521207826,20,10,1024,2893,$
+05:$36.2204724/47.2440945,$
+06:$36.2204724,47.2440945,0,0,0,0,$
+07:$FC2240-120$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,8,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+[FC2240-180]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$8192,1049602,32,17,0,$
+04:$521207827,20,10,1024,2893,$
+05:$36.2204724/70.8661417,$
+06:$36.2204724,70.8661417,0,0,0,0,$
+07:$FC2240-180$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,8,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+[FC2250-60]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$8192,1049602,32,17,0,$
+04:$521207850,20,10,1024,2893,$
+05:$36.2204724/24.015748,$
+06:$36.2204724,24.015748,0,0,0,0,$
+07:$FC2250-60$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,8,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+[FC2250-120]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$8192,1049602,32,17,0,$
+04:$521207851,20,10,1024,2893,$
+05:$36.2204724/47.2440945,$
+06:$36.2204724,47.2440945,0,0,0,0,$
+07:$FC2250-120$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,8,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+[FC2250-180]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$8192,1049602,32,17,0,$
+04:$521207852,20,10,1024,2893,$
+05:$36.2204724/70.8661417,$
+06:$36.2204724,70.8661417,0,0,0,0,$
+07:$FC2250-180$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,8,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+[FC3600]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$8192,1049602,32,17,0,$
+04:$521207828,20,10,1024,2893,$
+05:$48/1968.0,$
+06:$48,1968,0,0,0,0,$
+07:$FC3600$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,LPT,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+
+[FC4200-50]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$8192,1049602,32,17,0,$
+04:$521207829,20,10,1024,2893,$
+05:$16.929/23.2283,$
+06:$16.929,23.2283,0,0,0,0,$
+07:$FC4200-50$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,LPT,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+[FC4200-60]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$8192,1049602,32,17,0,$
+04:$521207830,20,10,1024,2893,$
+05:$24.01575/35.8268,$
+06:$24.01575,35.8268,0,0,0,0,$
+07:$FC4200-60$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,LPT,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+[FC5100-75]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207831,20,10,1024,2893,$
+05:$29.6/1968.0,$
+06:$29.6,1968,0,0,0,0,$
+07:$FC5100-75$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,LPT,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+[FC5100-100]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207832,20,10,1024,2893,$
+05:$41.6/1968.0,$
+06:$41.6,1968,0,0,0,0,$
+07:$FC5100-100$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,LPT,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+[FC5100-130]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207833,20,10,1024,2893,$
+05:$54.0/1968.0,$
+06:$54.0,1968,0,0,0,0,$
+07:$FC5100-130$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,LPT,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+[FC5100-150]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207834,20,10,1024,2893,$
+05:$59.6/1968.0,$
+06:$59.6,1968,0,0,0,0,$
+07:$FC5100-150$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,LPT,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+[FC5100A-75]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207844,20,10,1024,2893,$
+05:$29.6/1968.0,$
+06:$29.6,1968,0,0,0,0,$
+07:$FC5100A-75$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,LPT,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+[FC5100A-100]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207845,20,10,1024,2893,$
+05:$41.6/1968.0,$
+06:$41.6,1968,0,0,0,0,$
+07:$FC5100A-100$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,LPT,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+[FC5100A-130]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207846,20,10,1024,2893,$
+05:$54.0/1968.0,$
+06:$54.0,1968,0,0,0,0,$
+07:$FC5100A-130$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,LPT,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+[FC5100A-150]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207847,20,10,1024,2893,$
+05:$59.6/1968.0,$
+06:$59.6,1968,0,0,0,0,$
+07:$FC5100A-150$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,LPT,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+[FC7000-60]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207850,20,10,1024,2893,$
+05:$23.622/1968.0,$
+06:$23.622,1968,0,0,0,0,$
+07:$FC7000-60$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+= {(2,Cut Media,)}
+Cut media = (2,0,F1,1,)
+- //macro
+- //comment
+
+[FC7000-75]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207835,20,10,1024,2893,$
+05:$29.6/1968.0,$
+06:$29.6,1968,0,0,0,0,$
+07:$FC7000-75$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+= {(2,Cut Media,)}
+Cut media = (2,0,F1,1,)
+- //macro
+- //comment
+
+[FC7000-100]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207836,20,10,1024,2893,$
+05:$41.6/1968.0,$
+06:$41.6,1968,0,0,0,0,$
+07:$FC7000-100$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+= {(2,Cut Media,)}
+Cut media = (2,0,F1,1,)
+- //macro
+- //comment
+
+[FC7000-130]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207837,20,10,1024,2893,$
+05:$54.0/1968.0,$
+06:$54.0,1968,0,0,0,0,$
+07:$FC7000-130$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+= {(2,Cut Media,)}
+Cut media = (2,0,F1,1,)
+- //macro
+- //comment
+
+[FC7000-160]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207838,20,10,1024,2893,$
+05:$63/1968.0,$
+06:$63,1968,0,0,0,0,$
+07:$FC7000-160$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+= {(2,Cut Media,)}
+Cut media = (2,0,F1,1,)
+- //macro
+- //comment
+
+[FC8000-60]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207853,20,10,1024,2893,$
+05:$23.622/1968.0,$
+06:$23.622,1968,0,0,0,0,$
+07:$FC8000-60$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,TCP/IP,LPR,FTP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}{(2,Step size,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)(2,0,)
+- //custom end
+= {(2,Cut Media,)}
+Cut media = (2,0,F1,1,)
+- //macro
+- //comment
+
+[FC8000-75]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207854,20,10,1024,2893,$
+05:$29.6/1968.0,$
+06:$29.6,1968,0,0,0,0,$
+07:$FC8000-75$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,TCP/IP,LPR,FTP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}{(2,Step size,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)(2,0,)
+- //custom end
+= {(2,Cut Media,)}
+Cut media = (2,0,F1,1,)
+- //macro
+- //comment
+
+[FC8000-100]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207855,20,10,1024,2893,$
+05:$41.6/1968.0,$
+06:$41.6,1968,0,0,0,0,$
+07:$FC8000-100$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,TCP/IP,LPR,FTP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}{(2,Step size,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)(2,0,)
+- //custom end
+= {(2,Cut Media,)}
+Cut media = (2,0,F1,1,)
+- //macro
+- //comment
+
+[FC8000-130]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207856,20,10,1024,2893,$
+05:$54.0/1968.0,$
+06:$54.0,1968,0,0,0,0,$
+07:$FC8000-130$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,TCP/IP,LPR,FTP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}{(2,Step size,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)(2,0,)
+- //custom end
+= {(2,Cut Media,)}
+Cut media = (2,0,F1,1,)
+- //macro
+- //comment
+
+[FC8000-160]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207857,20,10,1024,2893,$
+05:$63/1968.0,$
+06:$63,1968,0,0,0,0,$
+07:$FC8000-160$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,TCP/IP,LPR,FTP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}{(2,Step size,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)(2,0,)
+- //custom end
+= {(2,Cut Media,)}
+Cut media = (2,0,F1,1,)
+- //macro
+- //comment
+
+[FC612]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$8192,1049602,32,17,0,$
+04:$521207839,20,10,1024,2893,$
+05:$49.6063/35.43307,$
+06:$49.6063,35.43307,0,0,0,0,$
+07:$FC612$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,LPT,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+
+[FC4500-50]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$8192,1049602,32,17,0,$
+04:$521207829,20,10,1024,2893,$
+05:$16.9291/23.2283,$
+06:$16.9291,23.2283,0,0,0,0,$
+07:$FC4500-50$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,LPT,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+[FC4500-60]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$8192,1049602,32,17,0,$
+04:$521207830,20,10,1024,2893,$
+05:$24.0157/35.8268,$
+06:$24.0157,35.8268,0,0,0,0,$
+07:$FC4500-60$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,LPT,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+[FC4510-60]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$8192,1049602,32,17,0,$
+04:$521207862,20,10,1024,2893,$
+05:$23.6220/33.8583,$
+06:$23.6220,33.8583,0,0,0,0,$
+07:$FC4510-60$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,LPT,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+[CE6000-40]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207842,20,10,1024,2893,$
+05:$16/1968.0,$
+06:$16,1968,0,0,0,0,$
+07:$CE6000-40$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,LPT,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,0,4,1,0,1,0,),}{!(0,Speed,0,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+[CE6000-60]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207842,20,10,1024,2893,$
+05:$24/1968.0,$
+06:$24,1968,0,0,0,0,$
+07:$CE6000-60$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,LPT,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,0,4,1,0,1,0,),}{!(0,Speed,0,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,0)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+[CE6000-120]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207843,20,10,1024,2893,$
+05:$48/1968.0,$
+06:$48,1968,0,0,0,0,$
+07:$CE6000-120$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,LPT,TCP/IP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)
+- //custom end
+- //macro
+- //comment
+
+[FC8600-60]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207853,20,10,1024,2893,$
+05:$23.622/1968.0,$
+06:$23.622,1968,0,0,0,0,$
+07:$FC8600-60$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,TCP/IP,LPR,FTP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}{(2,Step size,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)(2,0,)
+- //custom end
+= {(2,Cut Media,)}
+Cut media = (2,0,F1,1,)
+- //macro
+- //comment
+
+[FC8600-75]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207854,20,10,1024,2893,$
+05:$29.6/1968.0,$
+06:$29.6,1968,0,0,0,0,$
+07:$FC8600-75$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,TCP/IP,LPR,FTP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}{(2,Step size,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)(2,0,)
+- //custom end
+= {(2,Cut Media,)}
+Cut media = (2,0,F1,1,)
+- //macro
+- //comment
+
+[FC8600-100]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207855,20,10,1024,2893,$
+05:$41.6/1968.0,$
+06:$41.6,1968,0,0,0,0,$
+07:$FC8600-100$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,TCP/IP,LPR,FTP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}{(2,Step size,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)(2,0,)
+- //custom end
+= {(2,Cut Media,)}
+Cut media = (2,0,F1,1,)
+- //macro
+- //comment
+
+[FC8600-130]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207856,20,10,1024,2893,$
+05:$54.0/1968.0,$
+06:$54.0,1968,0,0,0,0,$
+07:$FC8600-130$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,TCP/IP,LPR,FTP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}{(2,Step size,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)(2,0,)
+- //custom end
+= {(2,Cut Media,)}
+Cut media = (2,0,F1,1,)
+- //macro
+- //comment
+
+[FC8600-160]
+01:$9600,n,8,1,$
+02:$0,19,$
+03:$0,1049602,32,17,0,$
+04:$521207857,20,10,1024,2893,$
+05:$63/1968.0,$
+06:$63,1968,0,0,0,0,$
+07:$FC8600-160$
+- //cutting
+08:$pmcutter.dll$
+09:$254.0,0,0,33,2155872454,7$
+10:$U$
+11:$$
+12:$&100,100,100,^0,0,\0,0,$
+13:$$
+14:$M%ld,0,SO0,$
+15:$5,,,1,31,*1,%ld,$
+16:$$
+17:$0,$
+18:$$
+19:$$
+20:$D%ld,%ld,$
+21:$M%ld,%ld,$
+22:$$
+23:$$
+24:$$
+25:$$
+26:$$
+27:$BZ1,%d,%d,%d,%d,%d,%d,%d,%d,$
+28:$$
+29:$G$
+30:$$
+31:$$
+32:$$
+33:$$
+- //engraving
+- //printing
+300:$Graphtec<SPACE>USB,COM,TCP/IP,LPR,FTP,Fil$
+- //custom head
+= {L(0,Line Type,0,8,1,0,1,0,),}{B(0,Line scale,0,32000,1,0,1,0,),}{(2,Line Type,)}{J(0,Pen condition,1,4,1,0,1,0,),}{!(0,Speed,1,10,1,0,1,0,),}{(2,Acceleration Force,)}{(2,Offset,)}{(2,Step size,)}
+Cut Fast = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,7)(2,1,*6,30,)(2,0,)(2,0,)
+Cut Slow = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,3)(2,1,*6,30,)(2,0,)(2,0,)
+Pen Plot = (0,1,0)(0,1,100)(2,0,L100,1,100,50)(0,1,1)(0,1,10)(2,1,*6,30,)(2,0,)(2,0,)
+- //custom end
+= {(2,Cut Media,)}
+Cut media = (2,0,F1,1,)
+- //macro
+- //comment
+ \ No newline at end of file